Author: J.-S. KimPublisher:
ISBN:
Category :
Languages : en
Pages : 3
Book Description
Wiggler-driven Hose Instability of an Ion-focused Beam
Author: J.-S. KimHigh Energy Accelerators (Heacc 92) - Proceedings Of The Xv International Conference (In 2 Volumes)
Author: J RossbachPublisher: World Scientific
ISBN: 9814554073
Category :
Languages : en
Pages : 1288
Book Description
The High Energy Accelerator Conference has always been the monitor of the state of the art and the new trends in planning, construction and operation of large particle accelerators. It is held every three years. The 1992 conference is devoted to High Energy Hadron Accelerators and Colliders, Linear Colliders, e⁺e⁻ Storage Rings and related Technologies for these machines. In addition to status reports and contributed papers, the program features twelve survey talks which include summaries of individual poster papers.
Linear and Non-linear Calculations of the Hose Instability in the Ion-focused Regime
Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
A simple model is adopted to study the hose instability of an intense relativistic electron beam in a partially neutralized, low density ion channel (ion focused regime). Equations of motion for the beam and the channel are derived and linearized to obtain an approximate dispersion relation. The non-linear equations of motion are then solved numerically and the results compared to linearized data.
Lower Hybrid Instability Driven by a Spiraling Ion Beam
Author: S. SeilerPublisher:
ISBN:
Category : Ion bombardment
Languages : en
Pages : 12
Book Description
Proceedings
Author: Ion-beam-driven Lower-hybrid Instability and Resultant Anomalous Beam Slowing
Author: Steven W. SeilerHosing Instability of the Drive Electron Beam in the E157 Plasma-Wakefield Acceleration Experiment at the Stanford Linear Accelerator
Author: Brent Edward BluePublisher:
ISBN:
Category :
Languages : en
Pages : 84
Book Description
In the plasma-wakefield experiment at SLAC, known as E157, an ultra-relativistic electron beam is used to both excite and witness a plasma wave for advanced accelerator applications. If the beam is tilted, then it will undergo transverse oscillations inside of the plasma. These oscillations can grow exponentially via an instability know as the electron hose instability. The linear theory of electron-hose instability in a uniform ion column predicts that for the parameters of the E157 experiment (beam charge, bunch length, and plasma density) a growth of the centroid offset should occur. Analysis of the E157 data has provided four critical results. The first was that the incoming beam did have a tilt. The tilt was much smaller than the radius and was measured to be 5.3 {micro}m/{delta}{sub z} at the entrance of the plasma (IP1.) The second was the beam centroid oscillates in the ion channel at half the frequency of the beam radius (betatron beam oscillations), and these oscillations can be predicted by the envelope equation. Third, up to the maximum operating plasma density of E157 ({approx}2 x 10{sup 14} cm{sup -3}), no growth of the centroid offset was measured. Finally, time-resolved data of the beam shows that up to this density, no significant growth of the tail of the beam (up to 8ps from the centroid) occurred even though the beam had an initial tilt.
A Study of the Ion Hose Instability in the DARHT-II Downstream Transport Region
Author: J. F. McCarrickPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The second axis of the DARHT flash X-ray facility at Los Alamos National Laboratory (''DARHT-II'') is a multiple-pulse, 18.4 MeV, 2 kA induction electron linear accelerator [1]. A train of short ({approx}50 ns) pulses are converted via bremsstrahlung to X-rays, which are then used to make radiographic images at various times (nominally four) during a ''hydrotest'' experiment. The train of pulses is created by carving them out of a two microsecond long macropulse, using a fast switching element called a kicker [2]. The unused portion of the macropulse is absorbed in a beam dump. Thus, upstream of the kicker, two microseconds of beam are transported through a vacuum system roughly sixty meters long. These conditions involve length and, specifically, time scales which are new to the transport of high-current beams. A concern under such conditions are the macroscopic interactions between the electron beam and positive ions created by impact ionization of the residual gas in the vacuum system. Over two microseconds, the ion density can develop to a hundredth or even a tenth of a percent of the beam density--small, to be sure, but large enough to have cumulative effects over such a long transport distance. Two such effects will be considered here: the ion hose instability, where transverse forces conspire to pull the electron beam farther and farther off axis, and background gas focusing, where radial forces (with respect to the beam) change the beam envelope during the course of the macropulse. The former effect can cause beam emittance growth (affecting the ability to focus the beam on the target) and eventually catastrophic beam loss; the latter can cause either serious degradation of the statically tuned final focus on the converter target, or a pinching of the beam on the surface of the main dump to the point where the heat flux causes damage. The beam transport upstream of the kicker has two distinct phases. First, the beam is created and accelerated up to 18.4 MeV over a distance of about fifty meters. Then the true downstream transport begins: the beam drifts through a matching section in preparation for the kicker, over some ten meters; the long-pulse beam then travels about four more meters from the kicker to the main dump. In the accelerator, the beam energy is obviously not constant; the transport is emittance-dominated and done through nearly continuous solenoidal focusing. In the downstream section, there are only two discrete solenoids over the entire fourteen meters and the transport is largely ballistic. Since ion hose has been studied in the accelerator [3] and since the lack of continuous focusing is considered a concern with respect to ion hose in the downstream section, the focus of this study is only from the exit of the accelerator to the main dump. A more in-depth description of the baseline (ion-free) DARHT-II downstream transport, including description of the actual transport elements and their use, will not be presented in this document; such details can be found in the documents cited in the References. The study of these effects will be done in stages. In the next section, the nature of the residual gas in the vacuum system will be considered, along with the various assumptions made in characterizing the creation of ions. Then the ion hose instability will be described in its simplest form. In the fourth section, additional features of ion hose will then be presented which attempt to capture some of the key behavior. Then a much more complete model using particle-in-cell (PIC) numerical techniques will be described, followed by details of the specific implementation used here. In section seven, the code will be benchmarked against results published in the literature. Section eight has the most relevant material: the actual study of the effects of ion hose and background gas focusing in the DARHT-II downstream transport region. In section nine, a simple experiment which can be tacked on to existing experiments is proposed in order to verify the modeling. Finally, the results are summarized and the very last section lists references.
Conditioning Electron Beams in the Ion-Focused Regime
Author: Publisher:
ISBN:
Category :
Languages : en
Pages : 53
Book Description
Relativistic electron beams propagating through dense gas are subject to the resistive hose instability, a virulent kink instability that restricts the effective range of high-current beams. Previous studies have shown that the instability can be suppressed by centering the beam and tailoring its emittance prior to injection into the gas. One means of centering and tailoring a beam is to use short 'conditioning' cells that operate in the low pressure, ion-focused regime. In this paper, analytic models are developed to understand and assess the performance of such cells.
Author: