Author: Franklin De Ronde FurmanPublisher:
ISBN:
Category : Internal combustion engines
Languages : en
Pages :
Book Description
Valves and Valve Gears
Author: Franklin De Ronde FurmanPublisher:
ISBN:
Category : Internal combustion engines
Languages : en
Pages :
Book Description
Valves and Valve Gears, Vol. 2
Author: Franklin Deronde FurmanPublisher: Forgotten Books
ISBN: 9780282396091
Category : Technology & Engineering
Languages : en
Pages : 208
Book Description
Excerpt from Valves and Valve Gears, Vol. 2: Gasoline, Gas, and Oil Engines The part of this work on Valves and Valve Gears which relates to internal combustion engines is printed as a separate volume in order to meet the requirements Of varying courses of study, and the needs of those generally who are interested only in gasoline, gas, or Oil engines. This will enable those who wish to study particular cases to do so without being encumbered with literature relating to the steam engine when only matter concerning the internal combustion engine is desired, or vice versa. Those who wish to make a general study Of the methods of oper ating the several types Of internal combustion engines should first study Sections III and IV Of Volume I of this work. In these sec tions it is shown that seven fundamental valve forms underlie all valves in general use, and that six fundamental mechanisms, with their variations, underlie all valve gears whether applied to internal combustion engines or to steam engines. An understanding Of how the whole subject of valves and valve gears for all prime movers can be reduced to so few fundamental forms should materially aid in obtaining a grasp Of the subject as it is applied, in the present volume, to practical gasoline, gas, and Oil engines. The preface given in Volume I applies to this work on Valves and Valve Gears as a whole, and the comments and acknowledgments there made refer to this second volume as well as to the first. It is. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Valves and Valve Gears ...
Author: Franklin De Ronde FurmanPublisher:
ISBN:
Category : Internal combustion engines
Languages : en
Pages : 276
Book Description
Valves and Valve Gears ...
Author: Franklin De Ronde FurmanPublisher:
ISBN:
Category : Internal combustion engines
Languages : en
Pages :
Book Description
Valves and Valve Gears. Vol. 1. 2nd Ed
Author: F. de R. FurmanValves and Valve Gears, Vol. 1
Author: Franklin Deronde FurmanPublisher: Forgotten Books
ISBN: 9780266730941
Category : Technology & Engineering
Languages : en
Pages : 266
Book Description
Excerpt from Valves and Valve Gears, Vol. 1: Steam Engines and Steam Turbines Much Of the material in this work has been arranged after ex tended visits to drafting rooms in which the work in valve gears was being carried on in a practical way, and it is believed that the methods here presented will be found to agree fairly well with general practice. In writing up the descriptions Of the practical forms of valves and valve gears the author has received numerous courtesies from manufacturers which are hereby acknowledged. It has been the rule to have the manufacturer Of the valve or gear or engine described to pass finally on the accuracy Of the description and Of the illustrations that appear in this work. Every illustration has been newly prepared for this edition. In order to avoid the use of subscripts in numbering the illustrations and paragraphs as the work Of preparation proceeded, and as changes and additions were made, the author laid out the work originally by leaving ten numbers free at the end Of each section. It will be found that these numbers have been all used at the end Of some of the sections and that none have been used at the end Of other sections. The page numbers, however, are in consecutive order throughout the book. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Valves and Valve Gear Mechanisms
Author: William Ernest DalbyPublisher:
ISBN:
Category : Steam-engines
Languages : en
Pages : 390
Book Description
Valves and valve gears, vol II, gasoline, gas and oil engines
Author: F deR. FurmanValves and Valve Gears
Author: Franklin DeRonde FurmanValves and Valve Gear Mechanisms (Classic Reprint)
Author: William Ernest DalbyPublisher: Forgotten Books
ISBN: 9780282338527
Category : Technology & Engineering
Languages : en
Pages : 386
Book Description
Excerpt from Valves and Valve Gear Mechanisms The scope of this volume is limited to an examination of types of those gears in which there is one, and only one, position of the valve for a given position of the crank. In other words, the position of the valve is a function of a single variable only, namely the crank angle. A few gears are however described incidentally in which a governor is included in the mechanism operating the valve. In this case there is more than one position of the valve for a given position of the crank. The valve position is, in fact, a function of two variables, namely the crank angle and the time, and the valve position cannot be set out on a drawing from kinematic considerations alone. The proper examination of gears of this kind requires a study of the dynamics of governors, and this is not included in the present volume. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.