Utilization of Red Mud Residues from Alumina Production PDF Download

Author:
Publisher:
ISBN:
Category : Aluminum oxide
Languages : en
Pages : 38

View

Book Description

Author: Yingyi Zhang
Publisher: BoD – Books on Demand
ISBN: 1789851017
Category : Technology & Engineering
Languages : en
Pages : 112

View

Book Description
At present, a lot of metallurgical solid wastes have not been timely and effectively recycled, resulting in serious problems of environmental pollution and waste of resources. As a result, large-scale comprehensive utilization technologies have been initiated, including slag dry granulation technology, steel slag cement technology, slag wool technology, slag waste heat recovery technology, etc. The comprehensive utilization of metallurgical solid waste has attracted worldwide attention. It is an effective way to improve the utilization efficiency of resources and the added value of products by using scientific metallurgical solid waste recycling methods. This book intends to provide the reader with a comprehensive overview of metallurgical solid wastes comprehensive utilization technology. The comprehensive utilization methods of four representative metallurgical solid wastes are emphatically described, such as blast furnace slag, steel slag, tailings and metallurgical dust.

Author: Barry Sadler
Publisher: John Wiley & Sons
ISBN: 1118663071
Category : Technology & Engineering
Languages : en
Pages : 1410

View

Book Description
The Light Metals series is widely recognized as the definitive source of information on new developments in aluminum production technology. This new volume presents proceedings from 2013's Light Metal Symposia, covering the latest research and technologies on such areas as alumina and bauxite, aluminum reduction technology, electrode technology for aluminum production, cast shop for aluminum production, aluminum processing aluminum alloys, and cost affordable titanium IV. It also includes papers from a keynote presentation session discussing impurities in the aluminum supply chain are also included.

Author: G. M. Ritcey
Publisher:
ISBN:
Category : Mineral industries
Languages : en
Pages : 1028

View

Book Description

Author: Kirtikumar Randive
Publisher: Springer Nature
ISBN: 3030737969
Category : Science
Languages : en
Pages : 250

View

Book Description
This book explores sustainable mining knowledge, assessing researchers on the impacts of waste and new approaches to negotiating these impacts. Mining has always been a profitable venture; however, it comes with several boons and banes. The significant advantages of mining include employment generation, the establishment of townships and trade centers, and socio-economic growth. However, the mining activity is a significant cause of environmental degradation, including soils, atmosphere, water, solid wastes, changed topography, and health hazards. This book emphasizes value-added products from mining wastes and innovations for balancing environment, ecology, and economy. This book is designed for miners, policymakers, professionals, researchers, scientists, industrialists, and environmental agencies.

Author: Carlos Suarez
Publisher: Springer
ISBN: 3319481797
Category : Technology & Engineering
Languages : en
Pages : 1314

View

Book Description
An update of the definitive annual reference source in the field of aluminum production and related light metals technologies, a great mix of materials science and practical, applied technology surrounding aluminum, bauxite, aluminum reduction, rolling, casting, and production.

Author: Satish Chandra
Publisher: Elsevier
ISBN: 0815519516
Category : Science
Languages : en
Pages : 673

View

Book Description
The environmental aspects involved in the production and use of cement, concrete and other building materials are of growing importance. CO2 emissions are 0.8-1.3 ton/ton of cement production in dry process. SO2 emission is also very high, but is dependent upon the type of fuel used. Energy consumption is also very high at 100-150 KWT/ton of cement produced. It is costly to erect new cement plants. Substitution of waste materials will conserve dwindling resources, and will avoid the environmental and ecological damages caused by quarrying and exploitation of the raw materials for making cement. To some extent, it will help to solve the problem otherwise encountered in disposing of the wastes. Partial replacement of clinker or portland cement by slag, fly ash, silica fume and natural rock minerals illustrates these aspects. Partial replacement by natural materials that require little or no processing, such as pozzolans, calcined clays, etc., saves energy and decreases emission of gases. The output of waste materials suitable as cement replacement (slags, fly ashes, silica fumes, rice husk ash, etc.) is more than double that of cement production.These waste materials can partly be used, or processed, to produce materials suitable as aggregates or fillers in concrete. These can also be used as clinker raw materials, or processed into cementing systems. New grinding and mixing technology will make the use of these secondary materials simpler. Developments in chemical admixtures: superplasticizers, air entraining agents, etc., help in controlling production techniques and, in achieving the desired properties in concrete.Use of waste products is not only a partial solution to environmental and ecological problems; it significantly improves the microstructure, and consequently the durability properties of concrete, which are difficult to achieve by the use of pure portland cement. The aim is not only to make the cements and concrete less expensive, but to provide a blend of tailored properties of waste materials and portland cements suitable for specified purpose. This requires a better understanding of chemistry, and materials science.There is an increasing demand for better understanding of material properties, as well as better control of the microstructure developing in the construction material, to increase durability. The combination of different binders and modifiers to produce cheaper and more durable building materials will solve to some extent the ecological and environmental problems.

Author: Kay Richard
Publisher:
ISBN: 9781536143836
Category : Nature
Languages : en
Pages : 0

View

Book Description
Red mud is a waste material derived as residual from the Bayer process by the caustic digestion of crushed bauxite at elevated temperature. It is chemically characterized by the presence of Si, Al, Fe, Ca, Ti as well as an array of minor constituents such as Na, K, Cr, Ni, Mn, Cu, Zn and Pb. Red Mud: Production, Composition and Impact begins by giving a brief review of laboratories, in situ and remote sensing techniques applied to characterize the RM waste materials focusing on both standard and novel methods.Next, the authors deal with composite materials based on different kind of polymers and red mud, and attempts to summarize the literature about these kind of materials. A great deal of attention is also paid to the possible applications of these new alternatives to classical materials.The main characteristics of several red muds from own studies and the scientific literature are described, and relevant examples of chemical composition variability of red muds emphasize the variability in chemical and mineralogical composition of red muds.This compilation systematically presents the updated scientific literature data regarding the applications of red mud waste in environmental protection. The authors present aspects related to red mud composition and the types of treatments applied to red mud to enhance its adsorption or catalytic performances. The performance of red mud-adsorbents in the removal of inorganic anions, heavy metals and organic compounds from wastewaters, and gaseous effluents is also discussed.The final chapter reviews the existing technological solutions to valorize the red mud in order to develop other engineering activities. The aim is to provide information on the enormous bauxite and alumina industry in Guinea and to appeal for a global approach to tackle the management of red mud; to assist in economic and technical planning of the issue by scientists, industry-leaders, high level policy makers.

Author: Alan Tomsett
Publisher: Springer Nature
ISBN: 3030364089
Category : Technology & Engineering
Languages : en
Pages : 1385

View

Book Description
The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2020 collection includes papers from the following symposia: • Alumina and Bauxite• Aluminum Alloys, Processing and Characterization• Aluminum Reduction Technology• Cast Shop Technology• Cast Shop Technology: Recycling and Sustainability Joint Session• Electrode Technology for Aluminum Production

Author: Sehliselo Ndlovu
Publisher: CRC Press
ISBN: 1498767303
Category : Science
Languages : en
Pages : 531

View

Book Description
Increasingly stringent environmental regulations and industry adoption of waste minimization guidelines have thus, stimulated the need for the development of recycling and reuse options for metal related waste. This book, therefore, gives an overview of the waste generation, recycle and reuse along the mining, beneficiation, extraction, manufacturing and post-consumer value chain. This book reviews current status and future trends in the recycling and reuse of mineral and metal waste and also details the policy and legislation regarding the waste management, health and environmental impacts in the mining, beneficiation, metal extraction and manufacturing processes. This book is a useful reference for engineers and researchers in industry, policymakers and legislators in governance, and academics on the current status and future trends in the recycling and reuse of mineral and metal waste. Some of the key features of the book are as follows: Holistic approach to waste generation, recycling and reuse along the minerals and metals extraction. Detailed overview of metallurgical waste generation. Practical examples with complete flow sheets, techniques and interventions on waste management. Integrates the technical issues related to efficient resources utilization with the policy and regulatory framework. Novel approach to addressing future commodity shortages.