Turbulence in the Divertor Region of Tokamak Edge Plasma PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Turbulence in the Divertor Region of Tokamak Edge Plasma PDF full book. Access full book title Turbulence in the Divertor Region of Tokamak Edge Plasma by R. H. Cohen. Download full books in PDF and EPUB format.
Author: R. H. Cohen Publisher: ISBN: Category : Languages : en Pages :
Book Description
Results of recent modeling of tokamak edge plasma with the turbulence code BOUT are presented. In previous studies with BOUT the background profiles of plasma density and temperature were set as flux surface functions. However in the divertor region of a tokamak the temperature is typically lower and density is higher than those at the mid-plane. To account for this in the present study a poloidal variation of background plasma density and temperature is included to provide a more realistic model. For poloidally uniform profiles of the background plasma the calculated turbulence amplitude peaks near outer mid-plane, while in the divertor region the amplitude is small. However, present simulations show that as the background plasma profiles become more poloidally non-uniform the amplitude of density fluctuations, {tilde n}{sub i}, starts peaking in the divertor. It is found that in the divertor region the amplitude of n{sub i} fluctuations grows approximately linearly with the local density of the background plasma, n{sub i0}, while the amplitude of T{sub e} and {phi} fluctuations is positively correlated with the local electron temperature, T{sub e0}. Correlation analysis shows that plasma turbulence is isolated by the x-points.
Author: R. H. Cohen Publisher: ISBN: Category : Languages : en Pages :
Book Description
Results of recent modeling of tokamak edge plasma with the turbulence code BOUT are presented. In previous studies with BOUT the background profiles of plasma density and temperature were set as flux surface functions. However in the divertor region of a tokamak the temperature is typically lower and density is higher than those at the mid-plane. To account for this in the present study a poloidal variation of background plasma density and temperature is included to provide a more realistic model. For poloidally uniform profiles of the background plasma the calculated turbulence amplitude peaks near outer mid-plane, while in the divertor region the amplitude is small. However, present simulations show that as the background plasma profiles become more poloidally non-uniform the amplitude of density fluctuations, {tilde n}{sub i}, starts peaking in the divertor. It is found that in the divertor region the amplitude of n{sub i} fluctuations grows approximately linearly with the local density of the background plasma, n{sub i0}, while the amplitude of T{sub e} and {phi} fluctuations is positively correlated with the local electron temperature, T{sub e0}. Correlation analysis shows that plasma turbulence is isolated by the x-points.
Author: Publisher: ISBN: Category : Languages : en Pages : 17
Book Description
Results are presented for turbulence simulations with the fluid edge turbulence code BOUT [1]. The present study is focused on turbulence in the divertor leg region and on the role of the X-point in the structure of turbulence. Results of the present calculations indicate that the ballooning effects are important for the divertor fluctuations. The X-point shear leads to weak correlation of turbulence across the X-point regions, in particular for large toroidal wavenumber. For the saturated amplitudes of the divertor region turbulence it is found that amplitudes of density fluctuations are roughly proportional to the local density of the background plasma. The amplitudes of electron temperature and electric potential fluctuations are roughly proportional to the local electron temperature of the background plasma.
Author: Davide Galassi Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
Nuclear fusion could offer a new source of stable, non-CO2 emitting energy. Today, tokamaks offer the best performance by confining a high temperature plasma by means of a magnetic field. Two of the major technological challenges for the operation of tokamaks are the power extraction and the confinement of plasma over long periods. These issues are associated with the transport of particles and heat, which is determined by turbulence, from the central plasma to the edge zone. In this thesis, we model turbulence in the edge plasma. We study in particular the divertor configuration, in which the central plasma is isolated from the walls by means of an additional magnetic field. This complex magnetic geometry is simulated with the fluid turbulence code TOKAM3X, developed in collaboration between the IRFM at CEA and the M2P2 laboratory of the University of Aix-Marseille.A comparison with simulations in simplified geometry shows a similar intermittent nature of turbulence. Nevertheless, the amplitude of the fluctuations, which has a maximum at the equatorial plane, is greatly reduced near the X-point, where the field lines become purely toroidal, in agreement with the recent experimental data. The simulations in divertor configuration show a significantly higher confinement than in circular geometry. A partial inhibition of the radial transport of particles at the X-point contributes to this improvement. This mechanism is potentially important for understanding the transition from low confinement mode to high confinement mode, the intended operational mode for ITER.
Author: Publisher: ISBN: Category : Cleveland (Ohio) Languages : en Pages : 21
Book Description
Journal of a trip to a GAR encampment in Washington, DC. Very detailed description of his trip to the White House. Includes description of a day spent sight seeing in Cleveland, OH on the return trip to Michigan.
Author: Publisher: ISBN: Category : Languages : en Pages : 41
Book Description
The boundary plasma turbulence code BOUT models tokamak boundary-plasma turbulence in a realistic divertor geometry using modified Braginskii equations for plasma vorticity, density (ni), electron and ion temperature (T{sub e}; T{sub i}) and parallel momenta. The BOUT code solves for the plasma fluid equations in a three dimensional (3D) toroidal segment (or a toroidal wedge), including the region somewhat inside the separatrix and extending into the scrape-off layer; the private flux region is also included. In this paper, a description is given of the sophisticated physical models, innovative numerical algorithms, and modern software design used to simulate edge-plasmas in magnetic fusion energy devices. The BOUT code's unique capabilities and functionality are exemplified via simulations of the impact of plasma density on tokamak edge turbulence and blob dynamics.
Author: R. Cohen Publisher: ISBN: Category : Languages : en Pages : 16
Book Description
The edge-plasma profiles and fluxes to the divertor and walls of a divertor tokamak with a magnetic X-point are simulated by coupling a 2D transport code (UEDGE) and a 3D turbulence code (BOUT). An relaxed iterative coupling scheme is used where each code is run on its characteristic time scale, resulting in a statistical steady state. Plasma variables of density, parallel velocity, and separate ion and electron temperatures are included, together with a fluid neutral model for recycling neutrals at material surfaces. Results for the DIII-D tokamak parameters show that the turbulence is preferentially excited in the outer radial region of the edge where magnetic curvature is destabilizing and that substantial plasma particle flux is transported to the main chamber walls. These results are qualitatively consistent with some experimental observations. The coupled transport/turbulence simulation technique provides a strategy to understanding edge-plasma physics in more detailed than previously available and to significantly enhance the realism of predictions of the performance of future devices.
Author: Publisher: ISBN: Category : Languages : en Pages : 13
Book Description
The edge-plasma profiles and fluxes to the divertor and walls of a divertor tokamak with a magnetic X-point are simulated by coupling a 2D transport code (UEDGE) and a 3D turbulence code (BOUT). An relaxed iterative coupling scheme is used where each code is run on its characteristic time scale, resulting in a statistical steady state. Plasma variables of density, parallel velocity, and separate ion and electron temperatures are included, together with a fluid neutral model for recycling neutrals at material surfaces. Results for the DIII-D tokamak parameters show that the turbulence is preferentially excited in the outer radial region of the edge where magnetic curvature is destabilizing and that substantial plasma particle flux is transported to the main chamber walls. These results are qualitatively consistent with some experimental observations. The coupled transport/turbulence simulation technique provides a strategy to understanding edge-plasma physics in more detailed than previously available and to significantly enhance the realism of predictions of the performance of future devices.
Author: Divertor and Edge Plasma Theory W Group Publisher: Forgotten Books ISBN: 9780331794793 Category : Science Languages : en Pages : 56
Book Description
Excerpt from A Survey of Problems in Divertor and Edge Plasma Theory On the bases of expected fusion energy production in a fusion reactor and of the energy and particle confinement in tokamaks as presently observed and understood, it is clear that a major design problem for a tokamak reactor is the development of a technique to accept the huge heat and particle fluxes at the first wall. At the same time there should not be a significant impurity reflux into the device. The introduction of a divertor is considered the best solution to the problem of absorbing the fluxes leaving the tokamak while maintaining a pure plasma. The iter cda has identified the divertor design as one of the most difficult design tasks The divertor design has also been a major issue for bpx-cit and tpx. The studies of demo and tokamak reactors also identify the divertor action as a critical item for successful tokamak operation. Given the importance of the divertor, it is no surprise that some time ago major efforts were established to model the plasma outside the separatrix. Typically these codes, of which many exist worldwide, follow the plasma, heat flows, neutrals and impurities in the region from the separatrix to the divertor plates. The system is often conceptually divided into a scrape-off layer adjacent to the core plasma and the somewhat distinct divertor region. These codes demand information from more or less standard fusion plasma physics, the physics of sheaths, and extensive data on atomic and molecular processes and surface physics. The experimental database on the scrape-off layer and divertor is presently rather limited, but in the near future extensive experimental information to compare against model predictions will become available. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Author: D. A. Russell Publisher: ISBN: Category : Languages : en Pages : 10
Book Description
Results are presented from the 3D electromagnetic turbulence code BOUT, the 2D transport code UEDGE, and theoretical analysis of boundary turbulence and transport in a real divertor-plasma geometry and its relationship to the density limit. Key results include: (1) a transition of the boundary turbulence from resistive X-point to resistive-ballooning as a critical plasma density is exceeded; (2) formation of an X-point MARFE in 2D UEDGE transport simulations for increasing outboard radial transport as found by BOUT for increasing density; (3) formation of a density pedestal due to neutral fueling; (4)identification of convective transport by localized plasma 'blobs' in the SOL at high density and decorrelation of turbulence between the midplane and the divertor leg due to strong X-point magnetic shear; (5) a new divertor-leg instability driven by a radial tilt of the divertor plate.
Author: R. H. Cohen
Author: R. H. Cohen
Author: 
Author: Davide Galassi
Author: 
Author: 
Author: R. Cohen
Author: 
Author: Divertor and Edge Plasma Theory W Group
Author: D. A. Russell
Author: Fongyan Gang