Thermoplastic Pavement Marking Technology: TPM-Advanced PDF Download

Author: Heng-Mo Chu
Publisher: Heng-mo Chu
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 150

View

Book Description
Thermoplastic Pavement Marking Materials include spray, screed, extrusion, profile, and preform, which are considered as superior performance and cost-effectiveness markings. This book provides excellent resource for unskilled or novice pavement markers as well as professionally trained line marking operators and explains all factors that affect the achievement of thermoplastic pavement marking materials. An additional information about AS4049.2 and AS2009:2006 Standards applicable to pavement markings are included in appendix for technicians and engineers to select and inspect materials for performance.

Author: John Pichtel
Publisher: Rowman & Littlefield
ISBN: 1636710816
Category : Technology & Engineering
Languages : en
Pages : 417

View

Book Description
An in-depth look at what microplastics are, how prevalent they are, and what can be done about them for a professional and academic audience. The first part of the book provides an overview of plastics types, how they are released to the environment, and how they interact with organisms. This part also provides a background for several salient aspects of microplastics hazards (e.g., attachment of toxic chemicals, toxicity to organisms). Special attention will be paid to how microplastics decompose in the environment (which is significant in terms of mobility of toxicity). Subsequent chapters address how to sample and identify microplastics. The second part of the book examines technologies for removal of microplastics from water, wastewater, and soil. Biological, chemical, and physical technologies are presented--technologies that can destroy minute plastics or convert them into benign products. Theory of operation, practical considerations, and possible environmental impacts of their use are discussed. Key aspects include: * technologies available for removal of microplastics from wastewater and surface water; * how various toxins which are sorbed to microplastics adversely affect wastewater treatment processes; * technologies at the pilot- and field stage for removal of microplastics from sediment; and * the distribution of microplastics in the atmosphere. Written by John Pichtel, author of the acclaimed Fundamentals of Site Remediation, and Mathew Simpson.

Author: William D. Callister, Jr.
Publisher: John Wiley & Sons
ISBN: 1119453917
Category : Technology & Engineering
Languages : en
Pages : 949

View

Book Description
Callister's Materials Science and Engineering: An Introduction promotes student understanding of the three primary types of materials (metals, ceramics, and polymers) and composites, as well as the relationships that exist between the structural elements of materials and their properties. The 10th edition provides new or updated coverage on a number of topics, including: the Materials Paradigm and Materials Selection Charts, 3D printing and additive manufacturing, biomaterials, recycling issues and the Hall effect.

Author: Keith Mobley
Publisher: McGraw Hill Professional
ISBN: 0071641017
Category : Technology & Engineering
Languages : en
Pages : 1250

View

Book Description
Stay Up to Date on the Latest Issues in Maintenance Engineering The most comprehensive resource of its kind, Maintenance Engineering Handbook has long been a staple for engineers, managers, and technicians seeking current advice on everything from tools and techniques to planning and scheduling. This brand-new edition brings you up to date on the most pertinent aspects of identifying and repairing faulty equipment; such dated subjects as sanitation and housekeeping have been removed. Maintenance Engineering Handbook has been advising plant and facility professionals for more than 50 years. Whether you're new to the profession or a practiced veteran, this updated edition is an absolute necessity. New and updated sections include: Belt Drives, provided by the Gates Corporation Repair and Maintenance Cost Estimation Ventilation Fans and Exhaust Systems 10 New Chapters on Maintenance of Mechanical Equipment Inside: • Organization and Management of the Maintenance Function • Maintenance Practices • Engineering and Analysis Tools • Maintenance of Facilities and Equipment • Maintenance of Mechanical Equipment • Maintenance of Electrical Equipment • Instrumentation and Reliability Tools • Lubrication • Maintenance Welding • Chemical Corrosion Control and Cleaning

Author: Reza Farahani
Publisher: Elsevier
ISBN: 0123852021
Category : Business & Economics
Languages : en
Pages : 487

View

Book Description
This book provides a comprehensive overview of how to strategically manage the movement and storage of products or materials from any point in the manufacturing process to customer fulfillment. Topics covered include important tools for strategic decision making, transport, packaging, warehousing, retailing, customer services and future trends. An introduction to logistics Provides practical applications Discusses trends and new strategies in major parts of the logistic industry

Author: Franz Fourné
Publisher: Hanser Gardner Publications
ISBN: 9781569902509
Category : Technology & Engineering
Languages : en
Pages : 885

View

Book Description
This guide to plant design and machinery construction and operation is written by one of the pioneers in the field. It offers a comprehensive overview on processes, machines, and plant layouts for the production of synthetic (man-made) fibers from an engineering point of view. Detailed technical drawings, plus numerous formula and diagrams, illustrate the entire fiber-technical knowledge for the design of various production steps, from raw materials through polymerization, and spinning to textured and technical fabrics. This unique handbook is a treasury of knowledge for the expert, an indispensable adviser in solving day-to-day problems, and a must on the shelf for every library.

Author: Kuldip Singh Sangwan
Publisher: Springer Nature
ISBN: 3030442489
Category : Technology & Engineering
Languages : en
Pages : 281

View

Book Description
This open access book presents the proceedings of the 3rd Indo-German Conference on Sustainability in Engineering held at Birla Institute of Technology and Science, Pilani, India, on September 16–17, 2019. Intended to foster the synergies between research and education, the conference is one of the joint activities of the BITS Pilani and TU Braunschweig conducted under the auspices of Indo-German Center for Sustainable Manufacturing, established in 2009. The book is divided into three sections: engineering, education and entrepreneurship, covering a range of topics, such as renewable energy forecasting, design & simulation, Industry 4.0, and soft & intelligent sensors for energy efficiency. It also includes case studies on lean and green manufacturing, and life cycle analysis of ceramic products, as well as papers on teaching/learning methods based on the use of learning factories to improve students’problem-solving and personal skills. Moreover, the book discusses high-tech ideas to help the large number of unemployed engineering graduates looking for jobs become tech entrepreneurs. Given its broad scope, it will appeal to academics and industry professionals alike.

Author: Robert A. Douglas
Publisher: CRC Press
ISBN: 148221265X
Category : Political Science
Languages : en
Pages : 326

View

Book Description
"Everything that sustains us – grown, mined, or drilled – begins its journey to us on a low-volume road (Long)." Defined as roads with traffic volumes of no more than 400 vehicles per day, they have enormous impacts on economies, communication, and social interaction. Low-volume roads comprise, at one end of the spectrum, farm-to-market roads, roads in developing countries, northern roads, roads on aboriginal lands and parklands; and at the other end of the spectrum, heavy haul roads for mining, oil and gas, oil sands extraction, and forestry. Low-Volume Road Engineering: Design, Construction, and Maintenance gives an international perspective to the engineering design of low-volume roads and their construction and maintenance. It is a single reference drawing from the dispersed literature. It lays out the basic principles of each topic, from road location and geometric design, pavement design, slope stability and erosion control, through construction to maintenance, then refers the reader to more comprehensive treatment elsewhere. Wherever possible, comparisons are made between the standard specifications and practices existing in the US, Canada, the UK, South Africa, Australia and New Zealand. Topics covered include the following: Road classification, location, and geometric design Pavement concepts, materials, and thickness design Drainage, erosion and sediment control, and watercrossings Slope stability Geosynthetics Road construction, maintenance, and maintenance management Low-Volume Road Engineering: Design, Construction, and Maintenance is a valuable reference for engineers, planners, designers and project managers in consulting firms, contracting firms and NGOs. It also is an essential reference in support of university courses on transportation engineering and planning, and on mining, oil and gas, and forestry infrastructure.

Author: J.A. Covas
Publisher: Springer Science & Business Media
ISBN: 9401585717
Category : Technology & Engineering
Languages : en
Pages : 470

View

Book Description
Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.

Author: Philip Mitchell
Publisher: Society of Manufacturing Engineers
ISBN: 0872634566
Category : Technology & Engineering
Languages : en
Pages : 695

View

Book Description
This volume focuses on the practical application of processes for manufacturing plastic products. It includes information on design for manufacturability (DFM), material selection, process selection, dies, molds, and tooling, extrusion, injection molding, blow molding, thermoforming, lamination, rotational molding, casting, foam processing, compression and transfer molding, fiber reinforced processing, assembly and fabrication, quality, plant engineering and maintenance, management.