Author: Johnny W. Masey
Publisher:
ISBN:
Category : Iron
Languages : en
Pages : 128
Book Description
Thermal Conductivity, Electrical Resistivity, and Seebeck Coefficient of High Purity Iron and Iron Chromium Alloys from 80 K to 400 K
Thermal Conductivity, Electrical Resistivity and Seebeck Coefficient of High Purity Iron and Selected Iron Alloys from 90 K to 400 K. [Fe--1. 14 Cr, Fe--2. 96 Cr, Fe--1. 15 Cr--1. 30 Ni, and Fe--3. 15 Ni].
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The thermal conductivity, electrical resistivity, and Seebeck coefficient of high-purity iron, two iron--chromium alloys, one iron--nickel alloy, and one iron--chromium--nickel alloy were measured over the temperature range from 90 K to 400 K. Smoothed values for the thermal conductivity and electrical resistivity were used to calculate the electronic thermal conductivity, the lattice conductivity, and the Lorenz function by means of a binary alloy separation technique. The lattice conductivity and Lorenz function exhibited little change due to the addition of chromium; however, the addition of small amounts of nickel resulted in significant property changes. The lattice conductivity at high temperatures was calculated from theory and compared to experimental results. Good agreement between theory and experimental data was obtained. 17 figures, 29 tables.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The thermal conductivity, electrical resistivity, and Seebeck coefficient of high-purity iron, two iron--chromium alloys, one iron--nickel alloy, and one iron--chromium--nickel alloy were measured over the temperature range from 90 K to 400 K. Smoothed values for the thermal conductivity and electrical resistivity were used to calculate the electronic thermal conductivity, the lattice conductivity, and the Lorenz function by means of a binary alloy separation technique. The lattice conductivity and Lorenz function exhibited little change due to the addition of chromium; however, the addition of small amounts of nickel resulted in significant property changes. The lattice conductivity at high temperatures was calculated from theory and compared to experimental results. Good agreement between theory and experimental data was obtained. 17 figures, 29 tables.
Thermal Conductivity, Electrical Resistivity and Seebeck Coefficient of High Purity Iron and Selected Iron Alloys 90 K to 400 K
Author: Timothy K. Holder
Publisher:
ISBN:
Category : Iron
Languages : en
Pages : 174
Book Description
Publisher:
ISBN:
Category : Iron
Languages : en
Pages : 174
Book Description
Masters Theses in the Pure and Applied Sciences
Author: W. H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1468433814
Category : Science
Languages : en
Pages : 319
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 22 (thesis year 1977) a total of 10,658 theses titles from 28 Canadian and 227 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 22 reports theses submitted in 1977, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Publisher: Springer Science & Business Media
ISBN: 1468433814
Category : Science
Languages : en
Pages : 319
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 22 (thesis year 1977) a total of 10,658 theses titles from 28 Canadian and 227 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 22 reports theses submitted in 1977, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Nuclear Science Abstracts
Energy Research Abstracts
Thermal Conductivity of Solids at Room Temperature and Below
Author: Gregg E. Childs
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 632
Book Description
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 632
Book Description
ERDA Energy Research Abstracts
Author: United States. Energy Research and Development Administration. Technical Information Center
Publisher:
ISBN:
Category : Force and energy
Languages : en
Pages : 1066
Book Description
Publisher:
ISBN:
Category : Force and energy
Languages : en
Pages : 1066
Book Description
Thermal Conductivity and Electrical Resistivity Standard Reference Materials
Author: Jerome G. Hust
Publisher:
ISBN:
Category : Electrolytic iron
Languages : en
Pages : 46
Book Description
Publisher:
ISBN:
Category : Electrolytic iron
Languages : en
Pages : 46
Book Description