Author: Oscar CookPublisher:
ISBN:
Category : Chemistry
Languages : en
Pages : 16
Book Description
The Electrodeposition of Plutonium
Author: Oscar CookElectrodeposition of Plutonium at a Mercury Cathode
Author: John A. PorterPublisher:
ISBN:
Category : Electroforming
Languages : en
Pages : 20
Book Description
A Survey of Organic Solvents for the Electrodeposition of Plutonium
Author: John A. PorterPublisher:
ISBN:
Category : Electroplating
Languages : en
Pages : 16
Book Description
The Electrodeposition of Plutonium from Acid Solution
Author: R. KoMolecular Plating IV
Author: Nikola GetoffPublisher:
ISBN:
Category : Electroplating
Languages : en
Pages : 10
Book Description
Electrodeposition of Uranium and Plutonium on Thin Carbon and Titanium Substrates
Author: Publisher:
ISBN:
Category :
Languages : en
Pages : 23
Book Description
Preparation of Pu and U targets on thin natural C (100?g/cm2) and ti (2 and 3?m) substrates is described. The Actinide material of interest was first purified using ion exchange chromatography to remove any matrix contaminants or decay products present in the parent stock solution. The actinide solution was prepared in 0.05 M HNO3 with a final aliquot volume not exceeding 100?L for the deposition procedure. The electroplating cells were developed in-house and were primarily made of Teflon. The source material deposited ranged from 125 to 400?g/cm2. It was determined that multiple layers of U and Pu were required to produce thicker targets on Ti. Plating efficiency was greatly affected by the cell volume, solution aliquot size, pre-treatment of the foils, solution mixing during palting, and the fit of the electrode contact with the target substrate. The final procedure used for deposition is described in detail.
The Electrodeposition of Plutonium for Thermal Nubar Measurements
Author: S. R. IsaacsELECTRODEPOSITION OF PLUTONIUM FOR ALPHA PULSE HEIGHT ANALYSIS OF 236Pu IN 238Pu
Author: Continuous Electrowinning of Plutonium Metal
Author: M. H. CurtisPublisher:
ISBN:
Category : Plutonium
Languages : en
Pages : 116
Book Description
Electrodeposition of Plutonium
Author: Publisher:
ISBN:
Category :
Languages : en
Pages : 5
Book Description
Equipment for electrolytic deposition of plutonium from molten salt solutions was designed and built and was tested with cerium as a stand-in for plutonium. The electrolysis cell is a graphite crucible that serves as the anode; the cathode is a molybdenum rod. This paper discusses results of that test.