Author: Mirza I. Bichurin Publisher: CRC Press ISBN: 0429949618 Category : Science Languages : en Pages : 297
Book Description
This book is dedicated to modeling and application of magnetoelectric (ME) effects in layered and bulk composites based on magnetostrictive and piezoelectric materials. Currently, numerous theoretical and experimental studies on ME composites are available but few on the development and research of instruments based on them. So far, only investigation of ME magnetic field sensors has been cited in the existing literature. However, these studies have finally resulted in the creation of low-frequency ME magnetic field sensors with parameters substantially exceeding the characteristics of Hall sensors. The book presents the authors’ many years of experience gained in ME composites and through creation of device models based on their studies. It describes low-frequency ME devices, such as current and position sensors and energy harvesters, and microwave ME devices, such as antennas, attenuators, filters, gyrators, and phase shifters.
Author: Wade H. Shafer Publisher: Springer Science & Business Media ISBN: 1461524539 Category : Science Languages : en Pages : 391
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Author: Annelise Kopp Alves Publisher: Springer Science & Business Media ISBN: 3642412750 Category : Technology & Engineering Languages : en Pages : 92
Book Description
Nanostructured materials have been largely studied in the last few years. They have great potential of applications in different fields such as materials science, physics, chemistry, biology, mechanic and medicine. Synthesis and characterization of nanostructured materials is a subject of great interest involving science, market, politicians, government and society. Based on results obtained by the authors' research group during the past decade, this book comes to present novel techniques to synthesize nanostructured materials and characterize their properties such as crystallinity and crystallite size, specific surface area, particle size, morphology and catalytic activity. This book is aimed for students, researchers and engineers searching for methodologies to obtain and characterize nanostructures in details.
Author: M.D. Glinchuk Publisher: Springer Science & Business Media ISBN: 9400759924 Category : Technology & Engineering Languages : en Pages : 396
Book Description
This book covers the physical properties of nanosized ferroics, also called nanoferroics. Nanoferroics are an important class of ceramic materials that substitute conventional ceramic ferroics in modern electronic devices. They include ferroelectric, ferroelastic, magnetic and multiferroic nanostructured materials. The phase transitions and properties of these nanostructured ferroics are strongly affected by the geometric confinement originating from surfaces and interfaces. As a consequence, these materials exhibit a behavior different from the corresponding bulk crystalline, ceramic and powder ferroics. This monograph offers comprehensive coverage of size- and shape-dependent effects at the nanoscale; the specific properties that these materials have been shown to exhibit; the theoretical approaches that have been successful in describing the size-dependent effects observed experimentally; and the technological aspects of many chemical and physico-chemical nanofabrication methods relevant to making nanoferroic materials and composites. The book will be of interest to an audience of condensed matter physicists, material scientists and engineers, working on ferroic nanostructured materials, their fundamentals, fabrication and device applications.
Author: ASM International. Handbook Committee Publisher: ASM International ISBN: 0871702835 Category : Technology & Engineering Languages : en Pages : 1313
Book Description
A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Author: Biljana Stojanovic Publisher: Elsevier ISBN: 012811181X Category : Technology & Engineering Languages : en Pages : 661
Book Description
Magnetic, Ferroelectric, and Multiferroic Metal Oxides covers the fundamental and theoretical aspects of ferroics and magnetoelectrics, their properties, and important technological applications, serving as the most comprehensive, up-to-date reference on the subject. Organized in four parts, Dr. Biljana Stojanovic leads expert contributors in providing the context to understand the material (Part I: Introduction), the theoretical and practical aspects of ferroelectrics (Part II: Ferroelectrics: From Theory, Structure and Preparation to Application), magnetic metal oxides (Part III: Magnetic Oxides: Ferromagnetics, Antiferromagnetics and Ferrimagnetics), multiferroics (Part IV: Multiferroic Metal Oxides) and future directions in research and application (Part V: Future of Metal Oxide Ferroics and Multiferroics). As ferroelectric materials are used to make capacitors with high dielectric constant, transducers, and actuators, and in sensors, reed heads, and memories based on giant magnetoresistive effects, this book will provide an ideal source for the most updated information. - Addresses ferroelectrics, ferromagnetics and multiferroelectrics, providing a one-stop reference for researchers - Provides fundamental theory and relevant, important technological applications - Highlights their use in capacitors with high dielectric constant, transducers, and actuators, and in sensors, reed heads, and memories based on giant magnetoresistive effects
Author: Gurpreet Singh Publisher: John Wiley & Sons ISBN: 1119323649 Category : Technology & Engineering Languages : en Pages : 398
Book Description
This proceedings volume contains a collection of 34 papers from the following symposia held during the 2015 Materials Science and Technology (MS&T '15) meeting: Innovative Processing and Synthesis of Ceramics, Glasses and Composites Advances in Ceramic Matrix Composites Advanced Materials for Harsh Environments Advances in Dielectric Materials and Electronic Devices Controlled Synthesis, Processing, and Applications of Structure and Functional Nanomaterials Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work, Rustum Roy Memorial Symposium Sintering and Related Powder Processing Science and Technologies Surface Protection for Enhanced Materials Performance: Science, Technology, and Application Thermal Protection Materials and Systems Ceramic Optical Materials Alumina at the Forefront of Technology
Author: Likun Pan Publisher: BoD – Books on Demand ISBN: 9535122452 Category : Technology & Engineering Languages : en Pages : 652
Book Description
The book summarizes the current state of the know-how in the field of perovskite materials: synthesis, characterization, properties, and applications. Most chapters include a review on the actual knowledge and cutting-edge research results. Thus, this book is an essential source of reference for scientists with research fields in energy, physics, chemistry and materials. It is also a suitable reading material for graduate students.
Author: Mirza I. Bichurin
Author: 
Author: Wade H. Shafer
Author: Annelise Kopp Alves
Author: M.D. Glinchuk
Author: ASM International. Handbook Committee
Author: Biljana Stojanovic
Author: Gurpreet Singh
Author: Dibyendu Ganguli
Author: Likun Pan