Silicon Oxynitride Glasses and Glass-Ceramics Preparation and Properties PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Silicon Oxynitride Glasses and Glass-Ceramics Preparation and Properties PDF full book. Access full book title Silicon Oxynitride Glasses and Glass-Ceramics Preparation and Properties by R. Abramovici. Download full books in PDF and EPUB format.
Author: R. Abramovici Publisher: ISBN: Category : Languages : en Pages : 45
Book Description
The purpose of this work was to study the change of physical properties of certain glasses and the corresponding glass-ceramics as a consequence of incorporation of nitrogen. Five series of glasses and their crystallized samples of Me-Si-Al-O-N (Me = Li, Ca, Mg, Ca+Mg, Mg+Li) system were prepared and studied. The criteria for selecting the composition within each system were: potential crystalline phases, castability of the melts below 1600 C, and in some cases, solubility of nitrogen in the melts. Melting of the glasses was performed in alumina or slip cast silica crucibles, in air and also in nitrogen, with acceptable results as far as their corrosion resistance was concerned. Nitrogen retention was of 61.7 - 74.2% for glasses melted in air (in covered crucibles) and 79.4 - 90.7% for those melted in nitrogen atmosphere. Glass transition and dilatometric softening temperature, thermal expansion coefficient and microhardness were measured. The crystallized samples were examined also by XRD and SEM.
Author: R. Abramovici Publisher: ISBN: Category : Languages : en Pages : 45
Book Description
The purpose of this work was to study the change of physical properties of certain glasses and the corresponding glass-ceramics as a consequence of incorporation of nitrogen. Five series of glasses and their crystallized samples of Me-Si-Al-O-N (Me = Li, Ca, Mg, Ca+Mg, Mg+Li) system were prepared and studied. The criteria for selecting the composition within each system were: potential crystalline phases, castability of the melts below 1600 C, and in some cases, solubility of nitrogen in the melts. Melting of the glasses was performed in alumina or slip cast silica crucibles, in air and also in nitrogen, with acceptable results as far as their corrosion resistance was concerned. Nitrogen retention was of 61.7 - 74.2% for glasses melted in air (in covered crucibles) and 79.4 - 90.7% for those melted in nitrogen atmosphere. Glass transition and dilatometric softening temperature, thermal expansion coefficient and microhardness were measured. The crystallized samples were examined also by XRD and SEM.
Author: M.H. Lewis Publisher: Springer Science & Business Media ISBN: 9400908172 Category : Technology & Engineering Languages : en Pages : 388
Book Description
The emergence of synthetic ceramics as a prominent class of materials with a unique combination of properties has been an important part of the materials-science scene over the past 20 years. These 'high-technology' ceramics have varied applications in areas utilizing their exceptional mechanical, thermal, optical, magnetic or electronic properties. A notable development of the 1970s was that of 'Si-based' ceramics (Si3N4' SiC and 'Sialons') as high-temperature engineering solids. More recently the zirconia-based ceramics have evolved as a class of material with significant improvements in fracture-toughness. In the 1980s we are on the threshold of development of ceramic-matrix composites with the promise of over coming major limitations in engineering design with 'brittle' ceramics and the development of novel properties unattainable with monolithic micro structures. Throughout this period there have been significant but less well-publicized developments in the field of glass-ceramics and glasses. It is the purpose of this publication to review selected topics within this important area of materials science. A key element in understanding the relation between properties and microstructure is a knowledge of atomic arrangement in ceramic phases. Recent developments in NMR and X-ray absorption spectroscopies have had considerable impact on studies of atomic co-ordination in glasses and crystalline ceramic materials and are reviewed in Chapters 1 and 2. Glass-ceramics are derived from the parent glasses by controlled crystal lization and have properties dictated, in part, by the efficiency of crystal nucleation within the glass volume.
Author: Stuart Hampshire Publisher: ISBN: Category : Languages : en Pages : 96
Book Description
The objective was to study the effect on properties (such as microhardness, glass transition, crystallization temperature, viscosity, etc.) of replacing oxygen by nitrogen in sialon-based glasses containing rare-earth cations and to study the formation of glass-ceramics by controlled crystallization of these oxynitride glasses and to assess the effects of this on properties. Glasses were prepared by melting appropriate oxides and nitrides in boron nitride lined crucibles, melting at 1700 C under nitrogen and casting into preheated graphite moulds followed by annealing. Characterization of the glasses was carried out by differential thermal analysis (DTA) to ascertain the glass transition and crystallization temperatures and standard techniques used for microhardness and viscosity. Nitrogen increases the glass transition, microhardness and viscosity for constant cation ratio glasses and also inhibits crystallization. From DTA, suitable heat-treatment schedules were designed to produce fine-grain glass-ceramics. Optimization of these heat treatments was by measuring the changes (increases) in microhardness. Fully amorphous glasses can be prepared easily in large batches (approx. 100g) in many M-Si-Al-O-N systems. Work concentrated on Neodynium and Y-sialon glasses which undergo homogeneous nucleation at Tg+50 (C) followed by crystal growth at Tc-40 (C) each for 2.5 hours. (AW).
Author: Arun K. Varshneya Publisher: John Wiley & Sons ISBN: 111847256X Category : Technology & Engineering Languages : en Pages : 256
Book Description
This publication provides an excellent one-stop resource for understanding the most important current issues in the research in processing, properties and applications in glass and optical materials.
Author: Pascal Richet Publisher: John Wiley & Sons ISBN: 1118799399 Category : Technology & Engineering Languages : en Pages : 1568
Book Description
This Encyclopedia begins with an introduction summarizing itsscope and content. Glassmaking; Structure of Glass, GlassPhysics,Transport Properties, Chemistry of Glass, Glass and Light,Inorganic Glass Families, Organic Glasses, Glass and theEnvironment, Historical and Economical Aspect of Glassmaking,History of Glass, Glass and Art, and outlinepossible newdevelopments and uses as presented by the best known people in thefield (C.A. Angell, for example). Sections and chapters arearranged in a logical order to ensure overall consistency and avoiduseless repetitions. All sections are introduced by a briefintroduction and attractive illustration. Newly investigatedtopics will be addresses, with the goal of ensuring that thisEncyclopedia remains a reference work for years to come.
Author: Michael J. Hoffmann Publisher: Springer Science & Business Media ISBN: 9401109923 Category : Technology & Engineering Languages : en Pages : 451
Book Description
Proceedings of the NATO Advanced Research Workshop on `Tailoring of High Temperature Properties of Si3N4 Ceramics', Schloß Ringberg/Munich, Germany, October 6--9, 1993
Author: Emad El-Meliegy Publisher: Springer Science & Business Media ISBN: 1461412285 Category : Technology & Engineering Languages : en Pages : 260
Book Description
Glass ceramics are a special group of materials in which a base glass can be crystallized under carefully controlled conditions, which in turn determine the properties of the material. These materials offer a wide range of physical and mechanical properties combining the distinctive characteristics of sintered ceramics and glasses. This book provides readers with an interest in medical ceramics with the ability to start making their own glasses and glass ceramics, together with an understanding of the various factors that control the final properties of these medical and dental materials. In addition, the authors describe various industrial problems with current, clinically-used medical glass ceramics and discuss appropriate scientific solutions. Glasses and Glass Ceramics for Medical Applications will appeal to a broad audience of biomaterials scientists, ceramists, and bioengineers, particularly those with an interest in orthopedic and dental applications, as well as scientists and engineers involved in the manufacture of glasses, glazes, enamels, and other glass coatings for the medical materials industry. The book will also be of interest to undergraduate and graduate students in materials engineering and dentistry, and is suitable for use in courses on medical and dental materials.
Author: R. Abramovici
Author: R. Abramovici
Author: Vincent Morrissey
Author: M.H. Lewis
Author: Stuart Hampshire
Author: Arun K. Varshneya
Author: Ralph Anthony Chavez
Author: Pascal Richet
Author: Michael J. Hoffmann
Author: 
Author: Emad El-Meliegy