Author: Society of Automotive Engineers Publisher: ISBN: Category : Computers Languages : en Pages : 508
Book Description
The J1939 Handbook Supplement is a set of Recommended Practices defining a data network for use in a wide variety of applications, with primary emphasis to date on heavy-duty vehicles. It was designed to support general-purpose information transfer as well as the more demanding tasks of distributed control systems on board a vehicle. The top-level document provides an overview and serves as a master control for common definitions used by multiple applications and industries. The J1939 document defines the use of these standards in a particular application or industry, allowing J1939 to be tailored as needed without having to include definitions that do not apply. The intent of J1939 is to allow 'plug and play' capability for any device that is added to the network. This means that components made by different manufacturers can be installed on a common network, either during vehicle manufacture or as aftermarket devices, and that they will work together. This includes devices used in complex systems, such as vehicle drivetrains, wherein these devices must interact to perform sophisticated control functions. As such, J1939 represents far more than just a data network.By the manner in which data elements and messages are defined and agreed to within the subcommittee, it has become a means of performing system engineering and integration across each industry that is using it.
Author: Truck Bus Control and Communications Network Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
SAE J1939-1 specifies the minimum set of SAE J1939 documents that define the Truck and bus control and communications vehicle network as it applies to on-highway equipment. Vehicles covered include all on-highway straight trucks and combination vehicles. A combination vehicle consists of one towing vehicle (tractor) and one or more towed vehicles (trailers and dollies). Dolly axles within the road train are considered to be towed vehicles. This document has been updated with references to SAE publications and formatting changes. SAE J1939-76 was added as an SAE publication.
Author: Truck Bus Control and Communications Network Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements.The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.
Author: Truck Bus Control and Communications Network Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements.The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.This document has been modified to reflect the 'Extended Data Page' change, document general details for the Request process, include a reference to the SAE CS1939 - SAE J1939 Companion Spreadsheet, and update the format to the latest SAE document format standards. New parameters, parameter groups and other assignments are reviewed and discussed by the Subcommittee on a regular basis. This document has been updated to reflect all changes and additions approved and balloted through February 2008.
Author: Truck Bus Control and Communications Network Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This document has also changed to comply with the SAE Technical Standards Board format. Definitions have changed to Section 3 and Abbreviations to Section 4. All other section numbers have changed accordingly. This series of SAE Recommended Practices has been developed by the SAE Truck and Bus Control and Communications Network Subcommittee of the SAE Truck and Bus Electrical and Electronics Committee. The objectives of the subcommittee are to develop information reports, recommended practices, and standards concerned with the requirements design and usage of devices which transmit electronic signals and control information among vehicle components. The usage of these documents is not limited to truck and bus applications; other applications may be accommodated with immediate support being provided for construction and agricultural equipment, and stationary power systems. These documents are intended as a guide toward standard practice and are subject to change as to keep pace with experience and technical advances.New parameters and parameter groups are reviewed and discussed by the Subcommittee on a regular basis. This document reflects all changes and additions approved and balloted through December 2001.
Author: Truck Bus Control and Communications Network Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This top-level document provides a general overview of the SAE J1939 network and describes the subordinate document structure. This document includes definitions of terms and abbreviations which are used among the various SAE J1939 subordinate documents. This document has been revised to synchronize terminology that is included in related SAE J1939 recommended practices and technical reports.
Author: Truck Bus Control and Communications Network Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This document has also changed to comply with the SAE Technical Standards Board format. Definitions have changed to Section 3 and Abbreviations to Section 4. All other section numbers have changed accordingly. This series of SAE Recommended Practices has been developed by the SAE Truck and Bus Control and Communications Network Subcommittee of the SAE Truck and Bus Electrical and Electronics Committee. The objectives of the subcommittee are to develop information reports, recommended practices, and standards concerned with the requirements design and usage of devices which transmit electronic signals and control information among vehicle components. The usage of these documents is not limited to truck and bus applications; other applications may be accommodated with immediate support being provided for construction and agricultural equipment, and stationary power systems. These documents are intended as a guide toward standard practice and are subject to change as to keep pace with experience and technical advances.New parameters and parameter groups are reviewed and discussed by the Subcommittee on a regular basis. This document reflects all changes and additions approved and balloted through December 2001.
Author: Truck Bus Control and Communications Network Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This document has also changed to comply with the SAE Technical Standards Board format. Definitions have changed to Section 3 and Abbreviations to Section 4. All other section numbers have changed accordingly. This series of SAE Recommended Practices has been developed by the SAE Truck and Bus Control and Communications Network Subcommittee of the SAE Truck and Bus Electrical and Electronics Committee. The objectives of the subcommittee are to develop information reports, recommended practices, and standards concerned with the requirements design and usage of devices which transmit electronic signals and control information among vehicle components. The usage of these documents is not limited to truck and bus applications; other applications may be accommodated with immediate support being provided for construction and agricultural equipment, and stationary power systems. These documents are intended as a guide toward standard practice and are subject to change as to keep pace with experience and technical advances.New parameters and parameter groups are reviewed and discussed by the Subcommittee on a regular basis. This document reflects all changes and additions approved and balloted through December 2001.New parameters and parameter groups are reviewed and discussed by the Subcommittee on a regular basis. This SAE Recommended Practice has been updated to reflect all changes and additions approved and balloted through February 2007.
Author: Truck Bus Control and Communications Network Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
As described in the parent document, SAE J1939, there is a minimum of seven documents required to fully define acomplete version of this network. This particular SAE Recommended Practice, SAE J1939-71, describes an ApplicationLayer for vehicle use.New parameters and parameter groups are reviewed and discussed by the Truck and Bus Control and CommunicationsNetwork Committee on a regular basis. This SAE Recommended Practice has been updated to reflect all changes andadditions approved and balloted through February 2009.
Author: Truck Bus Control and Communications Network Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This series of SAE Recommended Practices was developed to provide an open interconnect system for on-board electronic systems. It is the intention of these documents to allow electronic devices to communicate with each other by providing a standard architecture. This particular document describes the Network Layer which defines the requirements and services needed for communicating between devices that are different segments of the SAE J1939 Vehicle Network.
Author: Society of Automotive Engineers
Author: Truck Bus Control and Communications Network Committee
Author: Truck Bus Control and Communications Network Committee
Author: Truck Bus Control and Communications Network Committee
Author: Truck Bus Control and Communications Network Committee
Author: Truck Bus Control and Communications Network Committee
Author: Truck Bus Control and Communications Network Committee
Author: Truck Bus Control and Communications Network Committee
Author: Truck Bus Control and Communications Network Committee
Author: Truck Bus Control and Communications Network Committee