SAE Passenger Compartment Air Filter Test Code-Test Method for Gas Removing Filters PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download SAE Passenger Compartment Air Filter Test Code-Test Method for Gas Removing Filters PDF full book. Access full book title SAE Passenger Compartment Air Filter Test Code-Test Method for Gas Removing Filters by Air Cleaner Test Code Standards Committee. Download full books in PDF and EPUB format.
Author: Air Cleaner Test Code Standards Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This laboratory test method applies to air filters that improve air quality by reducing concentrations of gaseous, odorous, or hazardous components from ambient and/or re-circulated air in vehicle cabins. The test method provides information on pressure drop, as well as gas and/or vapor removal characteristics. The purpose of the test method is to describe and establish test criteria to enable comparisons of filters and filter components that remove or reduce the levels of containment gases or vapors from air streams under specified laboratory conditions.
Author: Air Cleaner Test Code Standards Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This laboratory test method applies to air filters that improve air quality by reducing concentrations of gaseous, odorous, or hazardous components from ambient and/or re-circulated air in vehicle cabins. The test method provides information on pressure drop, as well as gas and/or vapor removal characteristics. The purpose of the test method is to describe and establish test criteria to enable comparisons of filters and filter components that remove or reduce the levels of containment gases or vapors from air streams under specified laboratory conditions.
Author: Air Cleaner Test Code Standards Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This SAE Recommended Practice describes laboratory test methods to measure filter performance. Performance includes, but is not limited to, air flow restriction or pressure drop, overall and fractional efficiency, holding capacity for airborne particles, and air filter structural integrity. The purpose of this test code is to establish and specify consistent test procedures, conditions, equipment, and performance reports to enable comparison of filter performance of particulate air filters used in automotive interior ventilation systems.
Author: HFTC6, Operator Accommodation Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This SAE test method establishes a uniform test procedure for determining the gravimetric (mass based) efficiency and pressure drop performance levels of operator enclosure panel type filters on off-road, self-propelled work machines used in earth moving, and forestry, as defined in SAE J1116 and for agricultural equipment as defined in ANSI/ASAE S390, and equipped with an operator enclosure with a powered fresh air system. ISO/TS 11155-1 may additionally be used, which describes the use of particle sizing devices to measure the fractional (particle size) efficiency of panel type filters for automotive cabin filter applications. Automotive cabin filters are similar to filters described in this procedure, and the ISO/TS 11155-1 test method is therefore directly applicable. Minor revisions to document to correct misspelled words, obsolete test specifications, and minimal changes in procedure.
Author: Filter Test Methods Standards Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test, ensures that the particle retention ability of the filter is measured in a single pass as no appreciable loading or regression will occur. As part of the 5 year review process parts of this document pertaining to bottle counting were removed. The rationale behind these revisions is to bring the document up to current technology that is used to characterize particle removing efficiencies in fuel filters. Online particle counting systems have proven to provide more reliable data than previously used off-line bottle counting systems. Other revisions to the document include corrected counts for test system validation and improved validation procedures for the injection and test systems. A more detailed test report sheet has also been added.
Author: SAE Publisher: ISBN: 9780768009101 Category : Transportation Languages : en Pages : 68
Book Description
This latest lubrication oil filter test code provides a means for evaluating the performance characteristics of full-flow oil filters on bench equipment. Contents include: Accuracy of Measuring Instruments and Test Conditions Resistance to Flow Filter Capacity and Contaminant Removal Characteristics of Full-Flow Filters Single Pass Particle Retention Capability Test Media Migration Test Collapse Test for Lube Oil Elements Inlet and Outlet Anti-Drain Valve Test Ability to Meet Environmental Conditions Installation and Removal Mechanical Tests and Relief Valve Performance. In addition to the test procedures, an appendix with sections covering contaminants, oil sample analysis, and miscellaneous equipment is included.
Author: Filter Test Methods Standards Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This SAE Recommended Practice is applicable to coolant filters installed on mobile or stationary equipment. It describes a body of tests used to characterize the stuctural integrity and filtration performance of coolant filters. J2709 has been reaffirmed to comply with the SAE five-year review policy.
Author: HFTC6, Operator Accommodation Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This SAE Recommended Practice establishes a uniform test procedure for determining performance levels of operator enclosure panel type air filters on off-road, self-propelled work machines used in construction, general-purpose industrial, agriculture, and forestry as defined in SAE J1116 and equipped with an operator enclosure with a powered fresh air system. The following operator enclosure air filter guideline has been established to cover dry type cab air filters used on off-road, self-propelled work machines.The objective of this procedure is to provide a uniform means for evaluating the performance characteristics of enclosure air filters on bench test equipment. The data collected by this test procedure can be used to establish standards of performance for enclosure air filters. Variations in actual field operating conditions are difficult to duplicate; however, with the procedure and equipment set forth, comparisons of air filter effectiveness can be made.In the past, there have been numerous configurations of test housings. All of these designs have had one objective, to provide uniform dust loading throughout the entire area of the filter.The performance characteristics of greatest interest are air flow restriction or pressure drop, particulate collection efficiency, and particulate capacity. These test recommendations are defined under air cleaner test code SAE J726; however, the test shroud configurations defined in SAE J726 are not applicable for operator enclosure filter comparison.
Author: Filter Test Methods Standards Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test ensures that the particle retention ability of the filter is measured in a single pass as no appreciable loading or regression will occur.
Author: Filter Test Methods Standards Committee Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This SAE Recommended Practice is applicable to gasoline and diesel fuel filters installed on fuel dispensing equipment, mobile or stationary. It describes a set of tests used to characterize the structural integrity, filtration performance, and reaction to water contaminant with fuel dispensing filters. This SAE Recommended Practice is being revised to update current practices.
Author: Air Cleaner Test Code Standards Committee
Author: Air Cleaner Test Code Standards Committee
Author: Air Cleaner Test Code Standards Committee
Author: T. J. Ptak
Author: HFTC6, Operator Accommodation
Author: Filter Test Methods Standards Committee
Author: SAE
Author: Filter Test Methods Standards Committee
Author: HFTC6, Operator Accommodation
Author: Filter Test Methods Standards Committee
Author: Filter Test Methods Standards Committee