Author:
Publisher:
ISBN:
Category : Pavements, Concrete
Languages : en
Pages : 139
Book Description
Deterioration in Portland Cement Concrete (PCC) pavements can occur due to distresses caused by a combination of traffic loads and weather conditions. Hot mix asphalt (HMA) overlay is the most commonly used rehabilitation technique for such deteriorated PCC pavements. However, the performance of these HMA overlaid pavements is hindered due to the occurrence of reflective cracking, resulting in significant reduction of pavement serviceability. Various fractured slab techniques, including rubblization, crack and seat, and break and seat are used to minimize reflective cracking by reducing the slab action. The main objective of this project is to develop a mechanistic-empirical (ME) design aproach for the HMA overlay thickness design for fractured PCC pavements. In this design procedure, failure criteria such as the tensile strain at the bottom of HMA layer and the vertical compressive strain on the surface of subgrade are used to consider HMA fatigue and subgrade rutting, respectively. The developed ME design system is also implemented in a Visual Basic computer program.
Rehabilitation of Concrete Pavements Utilizing Rubblization and Crack and Seat Methods
Author:
Publisher:
ISBN:
Category : Pavements, Concrete
Languages : en
Pages : 139
Book Description
Deterioration in Portland Cement Concrete (PCC) pavements can occur due to distresses caused by a combination of traffic loads and weather conditions. Hot mix asphalt (HMA) overlay is the most commonly used rehabilitation technique for such deteriorated PCC pavements. However, the performance of these HMA overlaid pavements is hindered due to the occurrence of reflective cracking, resulting in significant reduction of pavement serviceability. Various fractured slab techniques, including rubblization, crack and seat, and break and seat are used to minimize reflective cracking by reducing the slab action. The main objective of this project is to develop a mechanistic-empirical (ME) design aproach for the HMA overlay thickness design for fractured PCC pavements. In this design procedure, failure criteria such as the tensile strain at the bottom of HMA layer and the vertical compressive strain on the surface of subgrade are used to consider HMA fatigue and subgrade rutting, respectively. The developed ME design system is also implemented in a Visual Basic computer program.
Publisher:
ISBN:
Category : Pavements, Concrete
Languages : en
Pages : 139
Book Description
Deterioration in Portland Cement Concrete (PCC) pavements can occur due to distresses caused by a combination of traffic loads and weather conditions. Hot mix asphalt (HMA) overlay is the most commonly used rehabilitation technique for such deteriorated PCC pavements. However, the performance of these HMA overlaid pavements is hindered due to the occurrence of reflective cracking, resulting in significant reduction of pavement serviceability. Various fractured slab techniques, including rubblization, crack and seat, and break and seat are used to minimize reflective cracking by reducing the slab action. The main objective of this project is to develop a mechanistic-empirical (ME) design aproach for the HMA overlay thickness design for fractured PCC pavements. In this design procedure, failure criteria such as the tensile strain at the bottom of HMA layer and the vertical compressive strain on the surface of subgrade are used to consider HMA fatigue and subgrade rutting, respectively. The developed ME design system is also implemented in a Visual Basic computer program.
Guidance, Parameters, and Recommendations for Rubblized Pavements
The Crack and Seat Method of Pavement Rehabilitation
Author: Amy M. Schutzbach
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 112
Book Description
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 112
Book Description
Performance Evaluation of Rubblized Pavements in Iowa
Author: Halil Ceylan
Publisher:
ISBN:
Category : Pavements, Concrete
Languages : en
Pages : 126
Book Description
This Phase II follow-up study of IHRB Project TR-473 focused on the performance evaluation of rubblized pavements in Iowa. The primary objective of this study was to evaluate the structural condition of existing rubblized concrete pavements across Iowa through Falling Weight Deflectometer (FWD) tests, Dynamic Cone Penetrometer (DCP) tests, visual pavement distress surveys, etc. Through backcalculation of FWD deflection data using the ISU's advanced layer moduli backcalculation program, the rubblized layer moduli were determined for various projects and compared with each other for correlating with the long-term pavement performance. The AASHTO structural layer coefficient for rubblized layer was also calculated using the rubblized layer moduli. To validate the mechanistic-empirical (M-E) hot mix asphalt (HMA) overlay thickness design procedure developed during the Phase I study, the actual HMA overlay thickness from the rubblization projects were compared with the predicted thickness obtained from the design software. The results of this study show that rubblization is a valid option to use in Iowa in the rehabilitation of PCC provided the foundation is strong enough to support construction operations during the rubblization process. The M-E structural design methodology developed during Phase I can estimate the HMA overlay thickness reasonably well to achieve long-lasting performance of HMA pavements. The rehabilitation strategy is recommended for continued use in Iowa under those conditions conducive for rubblization.
Publisher:
ISBN:
Category : Pavements, Concrete
Languages : en
Pages : 126
Book Description
This Phase II follow-up study of IHRB Project TR-473 focused on the performance evaluation of rubblized pavements in Iowa. The primary objective of this study was to evaluate the structural condition of existing rubblized concrete pavements across Iowa through Falling Weight Deflectometer (FWD) tests, Dynamic Cone Penetrometer (DCP) tests, visual pavement distress surveys, etc. Through backcalculation of FWD deflection data using the ISU's advanced layer moduli backcalculation program, the rubblized layer moduli were determined for various projects and compared with each other for correlating with the long-term pavement performance. The AASHTO structural layer coefficient for rubblized layer was also calculated using the rubblized layer moduli. To validate the mechanistic-empirical (M-E) hot mix asphalt (HMA) overlay thickness design procedure developed during the Phase I study, the actual HMA overlay thickness from the rubblization projects were compared with the predicted thickness obtained from the design software. The results of this study show that rubblization is a valid option to use in Iowa in the rehabilitation of PCC provided the foundation is strong enough to support construction operations during the rubblization process. The M-E structural design methodology developed during Phase I can estimate the HMA overlay thickness reasonably well to achieve long-lasting performance of HMA pavements. The rehabilitation strategy is recommended for continued use in Iowa under those conditions conducive for rubblization.
Cracking, Seating and Overlaying of PCC Pavement
Author: John B. Wojakowski
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 32
Book Description
In the fall of 1984, the Kansas Department of Transportation constructed a project involving cracking, seating, and overlaying a portland cement concrete pavement. The project is located in Wyandotte County on K-7 highway, north of K-32. This project is on the west side of the Kansas City metropolitan area. Eight experimental sections and one control section were stipulated for this project. One section of regular construction was selected for the control section. Four of the eight test sections were designated to be cracked at 0.9 m (3 ft) centers, and the other four were cracked at 1.5 m (5 ft) centers. One half of each spacing pattern was saw cut at the quarter points of the 18.7 m (61.5 ft) panels [approximately 4.6 m (15 ft) spacing, minimum 127 mm (5 in.) deep, maximum 13 mm (0.5 in.) wide] prior to cracking. Four sections had minimal joint repair; four had normal joint patching. There have been no easy determinants as to why the transverse cracking is low in some sections, and high in others. In some years it appears to be one factor, but the next year the factor has appeared to change. After 10 years there is no difference attributable to the cracking spacing, probably because both spacings are too large to adequately distribute the thermal movements. Slightly better performance was noted in sections that have minimal joint patching. More recent projects have used rubblizing as a rehabilitation technique. These have not shown significantly better performance than the cracking method. More investigation needs to be done to quantify the effect of various components that are used in this technique.
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 32
Book Description
In the fall of 1984, the Kansas Department of Transportation constructed a project involving cracking, seating, and overlaying a portland cement concrete pavement. The project is located in Wyandotte County on K-7 highway, north of K-32. This project is on the west side of the Kansas City metropolitan area. Eight experimental sections and one control section were stipulated for this project. One section of regular construction was selected for the control section. Four of the eight test sections were designated to be cracked at 0.9 m (3 ft) centers, and the other four were cracked at 1.5 m (5 ft) centers. One half of each spacing pattern was saw cut at the quarter points of the 18.7 m (61.5 ft) panels [approximately 4.6 m (15 ft) spacing, minimum 127 mm (5 in.) deep, maximum 13 mm (0.5 in.) wide] prior to cracking. Four sections had minimal joint repair; four had normal joint patching. There have been no easy determinants as to why the transverse cracking is low in some sections, and high in others. In some years it appears to be one factor, but the next year the factor has appeared to change. After 10 years there is no difference attributable to the cracking spacing, probably because both spacings are too large to adequately distribute the thermal movements. Slightly better performance was noted in sections that have minimal joint patching. More recent projects have used rubblizing as a rehabilitation technique. These have not shown significantly better performance than the cracking method. More investigation needs to be done to quantify the effect of various components that are used in this technique.
Reflective Crack Mitigation Guide for Flexible Pavements
Author: R. Christopher Williams
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 142
Book Description
Reflective cracks form in pavements when hot-mix asphalt (HMA) overlays are placed over jointed and/or severely cracked rigid and flexible pavements. In the first part of the research, survival analysis was conducted to identify the most appropriate rehabilitation method for composite pavements and to evaluate the influence of different factors on reflective crack development. Four rehabilitation methods, including mill and fill, overlay, heater scarification (SCR), and rubblization, were analyzed using three performance indicators: reflective cracking, international roughness index (IRI), and pavement condition index (PCI). It was found that rubblization can significantly retard reflective cracking development compared to the other three methods. No significant difference for PCI was seen among the four rehabilitation methods. Heater scarification showed the lowest survival probability for both reflective cracking and IRI, while an overlay resulted in the poorest overall pavement condition based on PCI. In addition, traffic level was found not to be a significant factor for reflective cracking development. An increase in overlay thickness can significantly delay the propagation of reflective cracking for all four treatments. Soil types in rubblization pavement sites were assessed, and no close relationship was found between rubblized pavement performance and subgrade soil condition. In the second part of the research, the study objective was to evaluate the modulus and performance of four reflective cracking treatments: full rubblization, modified rubblization, crack and seat, and rock interlayer. A total of 16 pavement sites were tested by the surface wave method (SWM), and in the first four sites both falling weight deflectometer (FWD) and SWM were conducted for a preliminary analysis. The SWM gave close concrete layer moduli compared to the FWD moduli on a conventional composite pavement. However, the SWM provided higher moduli for the rubblized concrete layer. After the preliminary analysis, another 12 pavement sites were tested by the SWM. The results showed that the crack and seat method provided the highest moduli, followed by the modified rubblization method. The full rubblization and the rock interlayer methods gave similar, but lower, moduli. Pavement performance surveys were also conducted during the field study. In general, none of the pavement sites had rutting problems. The conventional composite pavement site had the largest amount of reflective cracking. A moderate amount of reflective cracking was observed for the two pavement sites with full rubblization. Pavements with the rock interlayer and modified rubblization treatments had much less reflective cracking. It is recommended that use of the modified rubblization and rock interlayer treatments for reflective cracking mitigation are best.
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 142
Book Description
Reflective cracks form in pavements when hot-mix asphalt (HMA) overlays are placed over jointed and/or severely cracked rigid and flexible pavements. In the first part of the research, survival analysis was conducted to identify the most appropriate rehabilitation method for composite pavements and to evaluate the influence of different factors on reflective crack development. Four rehabilitation methods, including mill and fill, overlay, heater scarification (SCR), and rubblization, were analyzed using three performance indicators: reflective cracking, international roughness index (IRI), and pavement condition index (PCI). It was found that rubblization can significantly retard reflective cracking development compared to the other three methods. No significant difference for PCI was seen among the four rehabilitation methods. Heater scarification showed the lowest survival probability for both reflective cracking and IRI, while an overlay resulted in the poorest overall pavement condition based on PCI. In addition, traffic level was found not to be a significant factor for reflective cracking development. An increase in overlay thickness can significantly delay the propagation of reflective cracking for all four treatments. Soil types in rubblization pavement sites were assessed, and no close relationship was found between rubblized pavement performance and subgrade soil condition. In the second part of the research, the study objective was to evaluate the modulus and performance of four reflective cracking treatments: full rubblization, modified rubblization, crack and seat, and rock interlayer. A total of 16 pavement sites were tested by the surface wave method (SWM), and in the first four sites both falling weight deflectometer (FWD) and SWM were conducted for a preliminary analysis. The SWM gave close concrete layer moduli compared to the FWD moduli on a conventional composite pavement. However, the SWM provided higher moduli for the rubblized concrete layer. After the preliminary analysis, another 12 pavement sites were tested by the SWM. The results showed that the crack and seat method provided the highest moduli, followed by the modified rubblization method. The full rubblization and the rock interlayer methods gave similar, but lower, moduli. Pavement performance surveys were also conducted during the field study. In general, none of the pavement sites had rutting problems. The conventional composite pavement site had the largest amount of reflective cracking. A moderate amount of reflective cracking was observed for the two pavement sites with full rubblization. Pavements with the rock interlayer and modified rubblization treatments had much less reflective cracking. It is recommended that use of the modified rubblization and rock interlayer treatments for reflective cracking mitigation are best.
Sustainable and Resilient Critical Infrastructure Systems
Author: Kasthurirangan Gopalakrishnan
Publisher: Springer Science & Business Media
ISBN: 3642114059
Category : Technology & Engineering
Languages : en
Pages : 272
Book Description
Sustainable and resilient critical infrastructure systems is an emerging paradigm in an evolving era of depleting assets in the midst of natural and man-made threats to provide a sustainable and high quality of life with optimized resources from social, economic, societal and environmental considerations. The increasing complexity and interconnectedness of civil and other interdependent infrastructure systems (electric power, energy, cyber-infrastructures, etc.) require inter- and multidisciplinary expertise required to engineer, monitor, and sustain these distributed large-scale complex adaptive infrastructure systems. This edited book is motivated by recent advances in simulation, modeling, sensing, communications/information, and intelligent and sustainable technologies that have resulted in the development of sophisticated methodologies and instruments to design, characterize, optimize, and evaluate critical infrastructure systems, their resilience, and their condition and the factors that cause their deterioration. Specific topics discussed in this book include, but are not limited to: optimal infrastructure investment allocation for sustainability, framework for manifestation of tacit critical infrastructure knowledge, interdependencies between energy and transportation systems for national long term planning, intelligent transportation infrastructure technologies, emergent research issues in infrastructure interdependence research, framework for assessing the resilience of infrastructure and economic systems, maintenance optimization for heterogeneous infrastructure systems, optimal emergency infrastructure inspection scheduling, and sustainable rehabilitation of deteriorated transportation infrastructure systems.
Publisher: Springer Science & Business Media
ISBN: 3642114059
Category : Technology & Engineering
Languages : en
Pages : 272
Book Description
Sustainable and resilient critical infrastructure systems is an emerging paradigm in an evolving era of depleting assets in the midst of natural and man-made threats to provide a sustainable and high quality of life with optimized resources from social, economic, societal and environmental considerations. The increasing complexity and interconnectedness of civil and other interdependent infrastructure systems (electric power, energy, cyber-infrastructures, etc.) require inter- and multidisciplinary expertise required to engineer, monitor, and sustain these distributed large-scale complex adaptive infrastructure systems. This edited book is motivated by recent advances in simulation, modeling, sensing, communications/information, and intelligent and sustainable technologies that have resulted in the development of sophisticated methodologies and instruments to design, characterize, optimize, and evaluate critical infrastructure systems, their resilience, and their condition and the factors that cause their deterioration. Specific topics discussed in this book include, but are not limited to: optimal infrastructure investment allocation for sustainability, framework for manifestation of tacit critical infrastructure knowledge, interdependencies between energy and transportation systems for national long term planning, intelligent transportation infrastructure technologies, emergent research issues in infrastructure interdependence research, framework for assessing the resilience of infrastructure and economic systems, maintenance optimization for heterogeneous infrastructure systems, optimal emergency infrastructure inspection scheduling, and sustainable rehabilitation of deteriorated transportation infrastructure systems.
Investigation and Application of Fractured Slab Techniques for PCC Pavements
Author: Samuel Owusu-Ababio
Publisher:
ISBN:
Category : Pavements, Concrete
Languages : en
Pages : 116
Book Description
Publisher:
ISBN:
Category : Pavements, Concrete
Languages : en
Pages : 116
Book Description
Evaluation of Various Hot Mix Asphalt Pavement Thicknesses Over Rubblized Concrete Pavement
Author: Irene K. Battaglia
Publisher:
ISBN:
Category : Pavements, Asphalt concrete
Languages : en
Pages : 52
Book Description
Publisher:
ISBN:
Category : Pavements, Asphalt concrete
Languages : en
Pages : 52
Book Description
Rehabilitation of Concrete Pavements
Author:
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 172
Book Description
A project panel was established to provide guidelines for the rehabilitation of concrete pavements in Colorado. Techniques used by other state highway agencies were compared to the type and severity of concrete pavement distress observed in-state. Representatives from the concrete and asphalt pavement paving organizations were also invited to provide input to the study. Suggested methods are provided to renew the design life of deteriorated concrete pavements. Alternative methods of construction from which to choose are included along with examples for comparing life cycle costs.
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 172
Book Description
A project panel was established to provide guidelines for the rehabilitation of concrete pavements in Colorado. Techniques used by other state highway agencies were compared to the type and severity of concrete pavement distress observed in-state. Representatives from the concrete and asphalt pavement paving organizations were also invited to provide input to the study. Suggested methods are provided to renew the design life of deteriorated concrete pavements. Alternative methods of construction from which to choose are included along with examples for comparing life cycle costs.