Author: Department of the Army
Publisher: Createspace Independent Pub
ISBN: 9781481003452
Category : History
Languages : en
Pages : 126
Book Description
This manual, “Recovery and Battle Damage Assessment and Repair (FM 4-30.31),” provides the authoritative doctrine guidance on using recovery and repair assets on the battlefield. Practical methods of recovering or repairing equipment (disabled or immobilized) due to hazardous terrain, mechanical failure, or a hostile action are also addressed. Field manual (FM) 4-30.31 is directed toward both the leader and the technician. Tactically, it provides an overview of how recovery and battle damage assessment and repair (BDAR) assets are employed on the battlefield. Technically, it provides principles of resistance and mechanical applications to overcome them. Equipment, rigging techniques, and expedient repairs are summarized as a refresher for recovery-trained military personnel and as general guidance for others. The procedures and doctrine in this manual apply to both wartime operations and military operations other than war. Normally, BDAR should be used when and where standard maintenance practices are not practical because of the mission, enemy, terrain and weather, troops and support available, time available, civil considerations (METT-TC) or METT-T space and logistics (METT-TSL) for USMC. BDAR is not intended to replace standard maintenance practices but rather to supplement them under certain conditions. Standard maintenance procedures provide the best, most effective means of returning disabled equipment to the operational commander—provided adequate time, parts, and tools are available. High-risk battle damage repairs (involving possible danger to personnel or further damage to equipment) are only permitted in emergencies, normally in a battlefield environment, and only when authorized by the unit commander or his designated representative. The goal is to return a combat system to the battlefield in the least amount of time, while minimizing danger to personnel and equipment. BDAR techniques are not limited to simply restoring minimal functional combat capability. If full mission capability can be restored expediently with a limited expenditure of time and assets, it should be restored. This decision is based on METT-TC. Some BDAR techniques, if applied, may result in shortened lifespan or further damage to components. The commander must decide whether the risk of having one less piece of equipment outweighs the risk of applying a potentially destructive field-expedient repair. Each technique provides appropriate warnings and cautions, which list the system's limitations caused by the action. Personnel must use ground guides and extreme caution when operating recovery assets around or on an aircraft.
Recovery and Battle Damage Assessment and Repair (FM 4-30. 31 / MCRP 4-11. 4A)
Author: Department of the Army
Publisher: Createspace Independent Pub
ISBN: 9781481003452
Category : History
Languages : en
Pages : 126
Book Description
This manual, “Recovery and Battle Damage Assessment and Repair (FM 4-30.31),” provides the authoritative doctrine guidance on using recovery and repair assets on the battlefield. Practical methods of recovering or repairing equipment (disabled or immobilized) due to hazardous terrain, mechanical failure, or a hostile action are also addressed. Field manual (FM) 4-30.31 is directed toward both the leader and the technician. Tactically, it provides an overview of how recovery and battle damage assessment and repair (BDAR) assets are employed on the battlefield. Technically, it provides principles of resistance and mechanical applications to overcome them. Equipment, rigging techniques, and expedient repairs are summarized as a refresher for recovery-trained military personnel and as general guidance for others. The procedures and doctrine in this manual apply to both wartime operations and military operations other than war. Normally, BDAR should be used when and where standard maintenance practices are not practical because of the mission, enemy, terrain and weather, troops and support available, time available, civil considerations (METT-TC) or METT-T space and logistics (METT-TSL) for USMC. BDAR is not intended to replace standard maintenance practices but rather to supplement them under certain conditions. Standard maintenance procedures provide the best, most effective means of returning disabled equipment to the operational commander—provided adequate time, parts, and tools are available. High-risk battle damage repairs (involving possible danger to personnel or further damage to equipment) are only permitted in emergencies, normally in a battlefield environment, and only when authorized by the unit commander or his designated representative. The goal is to return a combat system to the battlefield in the least amount of time, while minimizing danger to personnel and equipment. BDAR techniques are not limited to simply restoring minimal functional combat capability. If full mission capability can be restored expediently with a limited expenditure of time and assets, it should be restored. This decision is based on METT-TC. Some BDAR techniques, if applied, may result in shortened lifespan or further damage to components. The commander must decide whether the risk of having one less piece of equipment outweighs the risk of applying a potentially destructive field-expedient repair. Each technique provides appropriate warnings and cautions, which list the system's limitations caused by the action. Personnel must use ground guides and extreme caution when operating recovery assets around or on an aircraft.
Publisher: Createspace Independent Pub
ISBN: 9781481003452
Category : History
Languages : en
Pages : 126
Book Description
This manual, “Recovery and Battle Damage Assessment and Repair (FM 4-30.31),” provides the authoritative doctrine guidance on using recovery and repair assets on the battlefield. Practical methods of recovering or repairing equipment (disabled or immobilized) due to hazardous terrain, mechanical failure, or a hostile action are also addressed. Field manual (FM) 4-30.31 is directed toward both the leader and the technician. Tactically, it provides an overview of how recovery and battle damage assessment and repair (BDAR) assets are employed on the battlefield. Technically, it provides principles of resistance and mechanical applications to overcome them. Equipment, rigging techniques, and expedient repairs are summarized as a refresher for recovery-trained military personnel and as general guidance for others. The procedures and doctrine in this manual apply to both wartime operations and military operations other than war. Normally, BDAR should be used when and where standard maintenance practices are not practical because of the mission, enemy, terrain and weather, troops and support available, time available, civil considerations (METT-TC) or METT-T space and logistics (METT-TSL) for USMC. BDAR is not intended to replace standard maintenance practices but rather to supplement them under certain conditions. Standard maintenance procedures provide the best, most effective means of returning disabled equipment to the operational commander—provided adequate time, parts, and tools are available. High-risk battle damage repairs (involving possible danger to personnel or further damage to equipment) are only permitted in emergencies, normally in a battlefield environment, and only when authorized by the unit commander or his designated representative. The goal is to return a combat system to the battlefield in the least amount of time, while minimizing danger to personnel and equipment. BDAR techniques are not limited to simply restoring minimal functional combat capability. If full mission capability can be restored expediently with a limited expenditure of time and assets, it should be restored. This decision is based on METT-TC. Some BDAR techniques, if applied, may result in shortened lifespan or further damage to components. The commander must decide whether the risk of having one less piece of equipment outweighs the risk of applying a potentially destructive field-expedient repair. Each technique provides appropriate warnings and cautions, which list the system's limitations caused by the action. Personnel must use ground guides and extreme caution when operating recovery assets around or on an aircraft.
Recovery and Battle Damage Assessment and Repair
Author: Department of the Army
Publisher: Createspace Independent Publishing Platform
ISBN: 9781977787453
Category :
Languages : en
Pages : 130
Book Description
This manual, "Recovery and Battle Damage Assessment and Repair," provides the authoritative doctrine guidance on using recovery and repair assets on the battlefield. Practical methods of recovering or repairing equipment (disabled or immobilized) due to hazardous terrain, mechanical failure, or a hostile action are also addressed. Field manual (FM) 4-30.31, "Recovery and Battle Damage Assessment and Repair," is directed toward both the leader and the technician. Tactically, it provides an overview of how recovery and battle damage assessment and repair (BDAR) assets are employed on the battlefield. Technically, it provides principles of resistance and mechanical applications to overcome them. Equipment, rigging techniques, and expedient repairs are summarized as a refresher for recovery-trained military personnel and as general guidance for others.
Publisher: Createspace Independent Publishing Platform
ISBN: 9781977787453
Category :
Languages : en
Pages : 130
Book Description
This manual, "Recovery and Battle Damage Assessment and Repair," provides the authoritative doctrine guidance on using recovery and repair assets on the battlefield. Practical methods of recovering or repairing equipment (disabled or immobilized) due to hazardous terrain, mechanical failure, or a hostile action are also addressed. Field manual (FM) 4-30.31, "Recovery and Battle Damage Assessment and Repair," is directed toward both the leader and the technician. Tactically, it provides an overview of how recovery and battle damage assessment and repair (BDAR) assets are employed on the battlefield. Technically, it provides principles of resistance and mechanical applications to overcome them. Equipment, rigging techniques, and expedient repairs are summarized as a refresher for recovery-trained military personnel and as general guidance for others.
Army Techniques Publication Atp 4-31/McRp 4-11.4a Recovery and Battle Damage Assessment and Repair (Bdar) August 2014
Author: United States Government US Army
Publisher: Createspace Independent Publishing Platform
ISBN: 9781541175198
Category :
Languages : en
Pages : 142
Book Description
Army Techniques Publication ATP 4-31/MCRP 4-11.4A Recovery and Battle Damage Assessment and Repair (BDAR) August 2014 Soldiers and officers that perform recovery operations/battle damage assessment and repair for the Army perform a vital role of keeping their units and Army personnel safe while maintaining and providing the effective operational readiness rates needed to accomplish the mission. Recovery personnel, as identified in this publication, include every person that plays a role in recovery operations or battle damage assessment and repair. This includes professional recovery personnel, such as maintenance control officers, warrant technicians and maintenance teams. All personnel involved in recovery operations/ battle damage assessment and repair need to understand the environment in which they operate. This manual provides information on recovery support to unit operations also including the Joint environment. It is imperative for all personnel engaged in recovery operations/ battle damage assessment and repair support operations to have an understanding of the various staff organizations that have a role in recovery planning and support. It will be necessary for a recovery support activity to contact the higher, lower, or adjacent headquarters (both sustainment and operational) to coordinate support, report status, request technical assistance, or request additional resources. This manual will present the roles and mission of the various recovery organizations so that proper coordination can be conducted. The guidelines in this publication should be followed as closely as possible within the constraints and restrictions of the tactical situation. ATP 4-31, Recovery and Battle Damage Assessment and Repair (BDAR), is the revision of FM 4-30.31, Recovery and Battle Damage Assessment and Repair. ATP 4-31 provides an overview of the battlefield recovery, and battle damage assessment and repair for the fundamental purpose of returning combat assets to the battlefield as soon as possible. It also explains the difference between recovery operations with its different types and methods and the battle assessment and repairs. This publication also reviews the rigging procedures and the utilization of the mechanical advantage to accomplish the mission. Overviews the recovery methods, techniques and the safety precautions associated with each recovery operation. Major changes from FM 4-30.31 include an improved hand and arm signals for day and night recovery operations
Publisher: Createspace Independent Publishing Platform
ISBN: 9781541175198
Category :
Languages : en
Pages : 142
Book Description
Army Techniques Publication ATP 4-31/MCRP 4-11.4A Recovery and Battle Damage Assessment and Repair (BDAR) August 2014 Soldiers and officers that perform recovery operations/battle damage assessment and repair for the Army perform a vital role of keeping their units and Army personnel safe while maintaining and providing the effective operational readiness rates needed to accomplish the mission. Recovery personnel, as identified in this publication, include every person that plays a role in recovery operations or battle damage assessment and repair. This includes professional recovery personnel, such as maintenance control officers, warrant technicians and maintenance teams. All personnel involved in recovery operations/ battle damage assessment and repair need to understand the environment in which they operate. This manual provides information on recovery support to unit operations also including the Joint environment. It is imperative for all personnel engaged in recovery operations/ battle damage assessment and repair support operations to have an understanding of the various staff organizations that have a role in recovery planning and support. It will be necessary for a recovery support activity to contact the higher, lower, or adjacent headquarters (both sustainment and operational) to coordinate support, report status, request technical assistance, or request additional resources. This manual will present the roles and mission of the various recovery organizations so that proper coordination can be conducted. The guidelines in this publication should be followed as closely as possible within the constraints and restrictions of the tactical situation. ATP 4-31, Recovery and Battle Damage Assessment and Repair (BDAR), is the revision of FM 4-30.31, Recovery and Battle Damage Assessment and Repair. ATP 4-31 provides an overview of the battlefield recovery, and battle damage assessment and repair for the fundamental purpose of returning combat assets to the battlefield as soon as possible. It also explains the difference between recovery operations with its different types and methods and the battle assessment and repairs. This publication also reviews the rigging procedures and the utilization of the mechanical advantage to accomplish the mission. Overviews the recovery methods, techniques and the safety precautions associated with each recovery operation. Major changes from FM 4-30.31 include an improved hand and arm signals for day and night recovery operations
Army Techniques Publication ATP 4-31 / MCRP 3-40E.1 Recovery and Battle Damage Assessment and Repair (BDAR) November 2020
Author: United States Government Us Army
Publisher:
ISBN:
Category :
Languages : en
Pages : 144
Book Description
This United States Army and Marine Corps manual, Army Techniques Publication ATP 4-31 / MCRP 3-40E.1 Recovery and Battle Damage Assessment and Repair (BDAR) November 2020, provides techniques on how recovery and battle damage assessment and repair (BDAR) are employed during operations. The principal audience for ATP 4-31/MCRP 3-40E.1 is all members of the profession of arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this publication. Soldiers, Marines, and officers who perform recovery operations and battle damage assessment and repair for their service perform a vital role of keeping units and personnel safe while maintaining and providing the effective operational readiness rates required to accomplish the mission. Recovery personnel, as identified in this publication, includes every person that plays a role in recovery operations or battle damage assessment and repair. This includes professional recovery personnel, such as maintenance control officers, warrant technicians and maintenance teams. All personnel involved in recovery operations/battle damage assessment and repair need to understand the environment in which they operate. This manual provides information on recovery support to unit operations including operations within the Joint environment. It is imperative for all personnel engaged in recovery operations or battle damage assessment and repair support operations to have an understanding of the various staff organizations that have a role in recovery planning and support. It will be necessary for a recovery support activity to contact the higher, lower, or adjacent headquarters (both sustainment and operational) to coordinate support, report status, request technical assistance, or request additional resources. This manual presents the roles and missions of the various recovery organizations to enhance coordination. Readers should follow the guidelines in this publication as closely as possible within the constraints and restrictions of the tactical situation.
Publisher:
ISBN:
Category :
Languages : en
Pages : 144
Book Description
This United States Army and Marine Corps manual, Army Techniques Publication ATP 4-31 / MCRP 3-40E.1 Recovery and Battle Damage Assessment and Repair (BDAR) November 2020, provides techniques on how recovery and battle damage assessment and repair (BDAR) are employed during operations. The principal audience for ATP 4-31/MCRP 3-40E.1 is all members of the profession of arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this publication. Soldiers, Marines, and officers who perform recovery operations and battle damage assessment and repair for their service perform a vital role of keeping units and personnel safe while maintaining and providing the effective operational readiness rates required to accomplish the mission. Recovery personnel, as identified in this publication, includes every person that plays a role in recovery operations or battle damage assessment and repair. This includes professional recovery personnel, such as maintenance control officers, warrant technicians and maintenance teams. All personnel involved in recovery operations/battle damage assessment and repair need to understand the environment in which they operate. This manual provides information on recovery support to unit operations including operations within the Joint environment. It is imperative for all personnel engaged in recovery operations or battle damage assessment and repair support operations to have an understanding of the various staff organizations that have a role in recovery planning and support. It will be necessary for a recovery support activity to contact the higher, lower, or adjacent headquarters (both sustainment and operational) to coordinate support, report status, request technical assistance, or request additional resources. This manual presents the roles and missions of the various recovery organizations to enhance coordination. Readers should follow the guidelines in this publication as closely as possible within the constraints and restrictions of the tactical situation.
McWp 3-35.3 - Military Operations on Urbanized Terrain (Mout)
Author: U. S. Marine Corps
Publisher: Lulu.com
ISBN: 9781312884557
Category : Reference
Languages : en
Pages : 368
Book Description
This manual provides guidance for the organization, planning, and conduct of the full range of military operations on urbanized terrain. This publication was prepared primarily for commanders, staffs, and subordinate leaders down to the squad and fire team level. It is written from a Marine air-ground task force perspective, with emphasis on the ground combat element as the most likely supported element in that environment. It provides the level of detailed information that supports the complexities of planning, preparing for, and executing small-unit combat operations on urbanized terrain. It also provides historical and environmental information that supports planning and training for combat in built-up areas
Publisher: Lulu.com
ISBN: 9781312884557
Category : Reference
Languages : en
Pages : 368
Book Description
This manual provides guidance for the organization, planning, and conduct of the full range of military operations on urbanized terrain. This publication was prepared primarily for commanders, staffs, and subordinate leaders down to the squad and fire team level. It is written from a Marine air-ground task force perspective, with emphasis on the ground combat element as the most likely supported element in that environment. It provides the level of detailed information that supports the complexities of planning, preparing for, and executing small-unit combat operations on urbanized terrain. It also provides historical and environmental information that supports planning and training for combat in built-up areas
Operational Terms and Graphics
Author: Department Army
Publisher: Createspace Independent Publishing Platform
ISBN: 9781973920519
Category :
Languages : en
Pages : 480
Book Description
This manual is a dual-Service US Army and US Marine Corps publication introducing new terms and definitions and updating existing definitions as reflected in the latest editions of Army field manuals and Marine Corps doctrinal, warfighting, and reference publications. It complies with DOD Military Standard 2525. When communicating instructions to subordinate units, commanders and staffs from company through corps should use this manual as a dictionary of operational terms and military graphics.
Publisher: Createspace Independent Publishing Platform
ISBN: 9781973920519
Category :
Languages : en
Pages : 480
Book Description
This manual is a dual-Service US Army and US Marine Corps publication introducing new terms and definitions and updating existing definitions as reflected in the latest editions of Army field manuals and Marine Corps doctrinal, warfighting, and reference publications. It complies with DOD Military Standard 2525. When communicating instructions to subordinate units, commanders and staffs from company through corps should use this manual as a dictionary of operational terms and military graphics.
Department of Defense Dictionary of Military and Associated Terms
Author: United States. Joint Chiefs of Staff
Publisher:
ISBN:
Category : Military art and science
Languages : en
Pages : 392
Book Description
Publisher:
ISBN:
Category : Military art and science
Languages : en
Pages : 392
Book Description
Field Manual FM 3-98 Reconnaissance and Security Operations July 2015
Author: United States Army
Publisher: CreateSpace
ISBN: 9781516806997
Category :
Languages : en
Pages : 176
Book Description
This publication, Field Manual FM 3-98 Reconnaissance and Security Operations July 2015, provides doctrinal guidance and direction for Cavalry organizations, as well as reconnaissance and security organizations. This FM establishes the foundation for the development of tactics and procedures in subordinate doctrine publications. This publication applies across the range of military operations. While the main focus of this field manual is Cavalry formations within the units listed below, all maneuver formations must be able to conduct reconnaissance and security tasks. - Armored brigade combat team (ABCT) Cavalry squadron. - Infantry brigade combat team (IBCT) Cavalry squadron. - Stryker brigade combat team (SBCT) Cavalry squadron. - Battlefield surveillance brigade (BFSB) Cavalry squadron. - It is applicable to the- - Scout platoon of maneuver battalions. - Combat aviation brigade air squadron. The principal audiences for FM 3-98 are commanders, leaders, and staffs responsible for the planning, execution, or support of reconnaissance and security operations as well as instructors charged with teaching reconnaissance and security operations. Doctrine consists of fundamental principles that describe how to fight. At the tactical level, doctrine consists of authoritative principles concerning how to execute reconnaissance and security operations as part of Army and joint operations that require professional military judgment in their application. Importantly, our doctrine must describe how brigade combat teams (BCT) and subordinate units combine the capabilities of various arms into cohesive, combined arms, air-ground teams and provide a clear description of how to execute reconnaissance and security operations. This publication provides the commander and staff of Cavalry formations with doctrine relevant to Army and joint operations. This publication explains how effective reconnaissance and security operations generate depth, allow commanders reaction time and maneuver space, fight for information and collect information through stealth, protect against surprise, ease the forward movement of follow-on forces, and provide commanders with flexibility and adaptability. The doctrine described in this publication is applicable across unified land operations. The previous proponent manual for Cavalry Operations was FM 3-20.96, published 12 March 2010, which included operational considerations. This publication provides doctrinal guidance for all formations assigned to the ABCT, the IBCT, and SBCT. The following is a summary of each chapter in the manual: Chapter 1 addresses the role of Cavalry in unified land operations and Cavalry organizations. Chapter 2 discusses understanding the threat, potential threat groups and threat characteristics. Chapter 3 addresses the operational environment, shaping, engaging, and influencing outcomes, and consolidating gains. Chapter 4 highlights the updated concepts of mission command in relation to commander's reconnaissance and security guidance, the operations process and information collection. Chapter 5 begins with an overview, followed by a detailed discussion of the fundamentals of reconnaissance, forms of reconnaissance, and reconnaissance handover. Chapter 6 begins with an overview, followed with the fundamentals of security operations, counterreconnaissance, and the forms of security. Chapter 7 provides a short overview and then devotes a section to reconnaissance and security stability planning, stability principles and frameworks, and stability tasks. Chapter 8 describes sustainment for reconnaissance and security tasks, sustainment planning considerations for reconnaissance and security, sustainment considerations for reconnaissance and security and special sustainment consideration.
Publisher: CreateSpace
ISBN: 9781516806997
Category :
Languages : en
Pages : 176
Book Description
This publication, Field Manual FM 3-98 Reconnaissance and Security Operations July 2015, provides doctrinal guidance and direction for Cavalry organizations, as well as reconnaissance and security organizations. This FM establishes the foundation for the development of tactics and procedures in subordinate doctrine publications. This publication applies across the range of military operations. While the main focus of this field manual is Cavalry formations within the units listed below, all maneuver formations must be able to conduct reconnaissance and security tasks. - Armored brigade combat team (ABCT) Cavalry squadron. - Infantry brigade combat team (IBCT) Cavalry squadron. - Stryker brigade combat team (SBCT) Cavalry squadron. - Battlefield surveillance brigade (BFSB) Cavalry squadron. - It is applicable to the- - Scout platoon of maneuver battalions. - Combat aviation brigade air squadron. The principal audiences for FM 3-98 are commanders, leaders, and staffs responsible for the planning, execution, or support of reconnaissance and security operations as well as instructors charged with teaching reconnaissance and security operations. Doctrine consists of fundamental principles that describe how to fight. At the tactical level, doctrine consists of authoritative principles concerning how to execute reconnaissance and security operations as part of Army and joint operations that require professional military judgment in their application. Importantly, our doctrine must describe how brigade combat teams (BCT) and subordinate units combine the capabilities of various arms into cohesive, combined arms, air-ground teams and provide a clear description of how to execute reconnaissance and security operations. This publication provides the commander and staff of Cavalry formations with doctrine relevant to Army and joint operations. This publication explains how effective reconnaissance and security operations generate depth, allow commanders reaction time and maneuver space, fight for information and collect information through stealth, protect against surprise, ease the forward movement of follow-on forces, and provide commanders with flexibility and adaptability. The doctrine described in this publication is applicable across unified land operations. The previous proponent manual for Cavalry Operations was FM 3-20.96, published 12 March 2010, which included operational considerations. This publication provides doctrinal guidance for all formations assigned to the ABCT, the IBCT, and SBCT. The following is a summary of each chapter in the manual: Chapter 1 addresses the role of Cavalry in unified land operations and Cavalry organizations. Chapter 2 discusses understanding the threat, potential threat groups and threat characteristics. Chapter 3 addresses the operational environment, shaping, engaging, and influencing outcomes, and consolidating gains. Chapter 4 highlights the updated concepts of mission command in relation to commander's reconnaissance and security guidance, the operations process and information collection. Chapter 5 begins with an overview, followed by a detailed discussion of the fundamentals of reconnaissance, forms of reconnaissance, and reconnaissance handover. Chapter 6 begins with an overview, followed with the fundamentals of security operations, counterreconnaissance, and the forms of security. Chapter 7 provides a short overview and then devotes a section to reconnaissance and security stability planning, stability principles and frameworks, and stability tasks. Chapter 8 describes sustainment for reconnaissance and security tasks, sustainment planning considerations for reconnaissance and security, sustainment considerations for reconnaissance and security and special sustainment consideration.
Multiservice Helicopter Sling Load
Author: Coast Guard
Publisher: Independently Published
ISBN: 9781075288531
Category :
Languages : en
Pages : 210
Book Description
Multiservice Helicopter Sling Load: Basic Operations And Equipment COMDTINST M13482.2B; TM 4-48.09 (FM 4-20.197); MCRP 4-11.3E; NTTP 3-04.11; AFMAN 11-223 On the Cover: K9 Piper is one of the very special dogs that keep airports safe. You can find Piper's social media accounts by searching: @airportsk9. This manual is one of a series of manuals for aviation and ground personnel who perform helicopter sling load missions ashore or aboard ship. These manuals are a coordinated effort of the US Army, US Marine Corps, US Navy, US Air Force, and US Coast Guard. All services participate in the sling load certification program begun by the Army in 1984. These manuals include standardized rigging procedures and other information from that program. Efforts were made to standardize ground crew and hookup procedures and terminology. The terms "helicopter" and "aircraft" refer to vertical lift aircraft that participate in sling load operations. Where service-unique requirements apply to an entire chapter or body of text, the service initials are at the beginning of the chapter or text. Otherwise the initials are at the end of the applicable sentence. The information in this manual will familiarize personnel with the sling sets, cargo nets, and other sling load equipment in the DOD inventory. It will also acquaint them with the helicopters used for sling load and provide basic procedures for rigging and hooking up loads. Rigging equipment and procedures described in this manual may not be authorized for all aircraft or services because of equipment or service restrictions. This manual does not provide details on aviation operations nor does it present detailed data that is normally contained in unit standing operating procedures (SOPs). Why buy a book you can download for free? We print the paperback book so you don't have to. First you gotta find a good clean (legible) copy and make sure it's the latest version (not always easy). Some documents found on the web are missing some pages or the image quality is so poor, they are difficult to read. If you find a good copy, you could print it using a network printer you share with 100 other people (typically its either out of paper or toner). If it's just a 10-page document, no problem, but if it's 250-pages, you will need to punch 3 holes in all those pages and put it in a 3-ring binder. Takes at least an hour. It's much more cost-effective to just order the bound paperback from Amazon.com This book includes original commentary which is copyright material. Note that government documents are in the public domain. We print these paperbacks as a service so you don't have to. The books are compact, tightly-bound paperback, full-size (8 1/2 by 11 inches), with large text and glossy covers. 4th Watch Publishing Co. is a HUBZONE SDVOSB. https: //usgovpub.com
Publisher: Independently Published
ISBN: 9781075288531
Category :
Languages : en
Pages : 210
Book Description
Multiservice Helicopter Sling Load: Basic Operations And Equipment COMDTINST M13482.2B; TM 4-48.09 (FM 4-20.197); MCRP 4-11.3E; NTTP 3-04.11; AFMAN 11-223 On the Cover: K9 Piper is one of the very special dogs that keep airports safe. You can find Piper's social media accounts by searching: @airportsk9. This manual is one of a series of manuals for aviation and ground personnel who perform helicopter sling load missions ashore or aboard ship. These manuals are a coordinated effort of the US Army, US Marine Corps, US Navy, US Air Force, and US Coast Guard. All services participate in the sling load certification program begun by the Army in 1984. These manuals include standardized rigging procedures and other information from that program. Efforts were made to standardize ground crew and hookup procedures and terminology. The terms "helicopter" and "aircraft" refer to vertical lift aircraft that participate in sling load operations. Where service-unique requirements apply to an entire chapter or body of text, the service initials are at the beginning of the chapter or text. Otherwise the initials are at the end of the applicable sentence. The information in this manual will familiarize personnel with the sling sets, cargo nets, and other sling load equipment in the DOD inventory. It will also acquaint them with the helicopters used for sling load and provide basic procedures for rigging and hooking up loads. Rigging equipment and procedures described in this manual may not be authorized for all aircraft or services because of equipment or service restrictions. This manual does not provide details on aviation operations nor does it present detailed data that is normally contained in unit standing operating procedures (SOPs). Why buy a book you can download for free? We print the paperback book so you don't have to. First you gotta find a good clean (legible) copy and make sure it's the latest version (not always easy). Some documents found on the web are missing some pages or the image quality is so poor, they are difficult to read. If you find a good copy, you could print it using a network printer you share with 100 other people (typically its either out of paper or toner). If it's just a 10-page document, no problem, but if it's 250-pages, you will need to punch 3 holes in all those pages and put it in a 3-ring binder. Takes at least an hour. It's much more cost-effective to just order the bound paperback from Amazon.com This book includes original commentary which is copyright material. Note that government documents are in the public domain. We print these paperbacks as a service so you don't have to. The books are compact, tightly-bound paperback, full-size (8 1/2 by 11 inches), with large text and glossy covers. 4th Watch Publishing Co. is a HUBZONE SDVOSB. https: //usgovpub.com
DSCA Handbook
Author: United States. Department of Defense
Publisher: United States Department of Defense
ISBN:
Category : History
Languages : en
Pages : 584
Book Description
This two-in one resource includes the Tactical Commanders and Staff Toolkit plus the Liaison Officer Toolkit. Defense Support of Civil Authorities (DSCA)) enables tactical level Commanders and their Staffs to properly plan and execute assigned DSCA missions for all hazard operations, excluding Chemical, Biological, Radiological, Nuclear, high yield Explosives (CBRNE) or acts of terrorism. Applies to all United States military forces, including Department of Defense (DOD) components (Active and Reserve forces and National Guard when in Federal Status). This hand-on resource also may be useful information for local and state first responders. Chapter 1 contains background information relative to Defense Support of Civil Authorities (DSCA) including legal, doctinal, and policy issues. Chapter 2 provides an overview of the incident management processes including National Response Framework (NRF), National Incident Management Systems (NIMS), and Incident Command System (ICS) as well as Department of Homeland Security (DHS). Chapter 3 discuses the civilian and military responses to natural disaster. Chapter 4 provides a brief overview of Joint Operation Planning Process and mission analyis. Chapter 5 covers Defense Support of Civilian Authorities (DSCA) planning factors for response to all hazard events. Chapter 6 is review of safety and operational composite risk management processes Chapters 7-11 contain Concepts of Operation (CONOPS) and details five natrual hazards/disasters and the pertinent planning factors for each within the scope of DSCA.
Publisher: United States Department of Defense
ISBN:
Category : History
Languages : en
Pages : 584
Book Description
This two-in one resource includes the Tactical Commanders and Staff Toolkit plus the Liaison Officer Toolkit. Defense Support of Civil Authorities (DSCA)) enables tactical level Commanders and their Staffs to properly plan and execute assigned DSCA missions for all hazard operations, excluding Chemical, Biological, Radiological, Nuclear, high yield Explosives (CBRNE) or acts of terrorism. Applies to all United States military forces, including Department of Defense (DOD) components (Active and Reserve forces and National Guard when in Federal Status). This hand-on resource also may be useful information for local and state first responders. Chapter 1 contains background information relative to Defense Support of Civil Authorities (DSCA) including legal, doctinal, and policy issues. Chapter 2 provides an overview of the incident management processes including National Response Framework (NRF), National Incident Management Systems (NIMS), and Incident Command System (ICS) as well as Department of Homeland Security (DHS). Chapter 3 discuses the civilian and military responses to natural disaster. Chapter 4 provides a brief overview of Joint Operation Planning Process and mission analyis. Chapter 5 covers Defense Support of Civilian Authorities (DSCA) planning factors for response to all hazard events. Chapter 6 is review of safety and operational composite risk management processes Chapters 7-11 contain Concepts of Operation (CONOPS) and details five natrual hazards/disasters and the pertinent planning factors for each within the scope of DSCA.