Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 32
Book Description
Progress in Modeling of Laminar to Turbulent Transition on Turbine Vanes and Blades
Turbulence Modelling Approaches
Author: Konstantin Volkov
Publisher: BoD – Books on Demand
ISBN: 9535133497
Category : Science
Languages : en
Pages : 252
Book Description
Accurate prediction of turbulent flows remains a challenging task despite considerable work in this area and the acceptance of CFD as a design tool. The quality of the CFD calculations of the flows in engineering applications strongly depends on the proper prediction of turbulence phenomena. Investigations of flow instability, heat transfer, skin friction, secondary flows, flow separation, and reattachment effects demand a reliable modelling and simulation of the turbulence, reliable methods, accurate programming, and robust working practices. The current scientific status of simulation of turbulent flows as well as some advances in computational techniques and practical applications of turbulence research is reviewed and considered in the book.
Publisher: BoD – Books on Demand
ISBN: 9535133497
Category : Science
Languages : en
Pages : 252
Book Description
Accurate prediction of turbulent flows remains a challenging task despite considerable work in this area and the acceptance of CFD as a design tool. The quality of the CFD calculations of the flows in engineering applications strongly depends on the proper prediction of turbulence phenomena. Investigations of flow instability, heat transfer, skin friction, secondary flows, flow separation, and reattachment effects demand a reliable modelling and simulation of the turbulence, reliable methods, accurate programming, and robust working practices. The current scientific status of simulation of turbulent flows as well as some advances in computational techniques and practical applications of turbulence research is reviewed and considered in the book.
Applied Computational Fluid Dynamics
Author: Vijay K. Garg
Publisher: CRC Press
ISBN: 9780824701659
Category : Technology & Engineering
Languages : en
Pages : 442
Book Description
"Describes the latest techniques and real-life applications of computational fluid dynamics (CFD) and heat transfer in aeronautics, materials processing and manufacturing, electronic cooling, and environmental control. Includes new material from experienced researchers in the field. Complete with detailed equations for fluid flow and heat transfer."
Publisher: CRC Press
ISBN: 9780824701659
Category : Technology & Engineering
Languages : en
Pages : 442
Book Description
"Describes the latest techniques and real-life applications of computational fluid dynamics (CFD) and heat transfer in aeronautics, materials processing and manufacturing, electronic cooling, and environmental control. Includes new material from experienced researchers in the field. Complete with detailed equations for fluid flow and heat transfer."
Two-equation Low-Reynolds-number Turbulence Modeling of Transitional Boundary Layer Flows Characteristic of Gas Turbine Blades
Scientific and Technical Aerospace Reports
International Journal of Turbo & Jet-engines
37th AIAA Aerospace Sciences Meeting and Exhibit
Experimental Study of Boundary Layer Behavior in a Simulated Low Pressure Turbine
Author: Rickey J. Shyne
Publisher:
ISBN:
Category : Turbines
Languages : en
Pages : 166
Book Description
Publisher:
ISBN:
Category : Turbines
Languages : en
Pages : 166
Book Description
Design of a Three-passage, Low Reynolds Number Turbine Cascade with Periodic Flow Conditions
Author: Daniel R. Rogers
Publisher:
ISBN:
Category : Electronic dissertations
Languages : en
Pages : 116
Book Description
A numerical method for modeling a low Reynolds number turbine blade, the L1M, is presented along with the pitfalls encountered. A laminar solution was confirmed to not accurately predict the flow features known in low Reynolds number turbine blade flow. Three fully turbulent models were then used to try to predict the separation and reattachment of the flow. These models were also found to be insufficient for transitioning flows. A domain was created to manually trip the laminar flow to turbulent flow using a predictive turbulence transition model. The trip in the domain introduced an instability in the flow field that appears to be dependent on the discretization order, turbulence model, and transition location. The method was repeated using the Pack B blade and the same obstacles were apparent. The numerical method developed was then used in an optimization technique developed to design a wind tunnel simulating periodic flow conditions using only 2 blades. The method was first used to predict a cp distribution for the aft loaded L1A research blade provided by the U.S. Air Force. The method was then extended to a larger domain emulating the 2 blade, 2D wind tunnel. The end-wall geometry of the tunnel was then changed using previously defined control points to alter the distribution of cp along the suction surface of the interior blades. The tunnel cp's were compared to the computationally acquired periodic solution. The processed was repeated until an acceptable threshold was reached. The optimization was performed using the commercially available software iSIGHT by Engineous Solutions. The optimization algorithms used were the gradient based Successive Approximation Method, the Hooke Jeeves, and Simulated Annealing.
Publisher:
ISBN:
Category : Electronic dissertations
Languages : en
Pages : 116
Book Description
A numerical method for modeling a low Reynolds number turbine blade, the L1M, is presented along with the pitfalls encountered. A laminar solution was confirmed to not accurately predict the flow features known in low Reynolds number turbine blade flow. Three fully turbulent models were then used to try to predict the separation and reattachment of the flow. These models were also found to be insufficient for transitioning flows. A domain was created to manually trip the laminar flow to turbulent flow using a predictive turbulence transition model. The trip in the domain introduced an instability in the flow field that appears to be dependent on the discretization order, turbulence model, and transition location. The method was repeated using the Pack B blade and the same obstacles were apparent. The numerical method developed was then used in an optimization technique developed to design a wind tunnel simulating periodic flow conditions using only 2 blades. The method was first used to predict a cp distribution for the aft loaded L1A research blade provided by the U.S. Air Force. The method was then extended to a larger domain emulating the 2 blade, 2D wind tunnel. The end-wall geometry of the tunnel was then changed using previously defined control points to alter the distribution of cp along the suction surface of the interior blades. The tunnel cp's were compared to the computationally acquired periodic solution. The processed was repeated until an acceptable threshold was reached. The optimization was performed using the commercially available software iSIGHT by Engineous Solutions. The optimization algorithms used were the gradient based Successive Approximation Method, the Hooke Jeeves, and Simulated Annealing.