Author: H. Wieringa Publisher: Springer Science & Business Media ISBN: 9400944160 Category : Technology & Engineering Languages : en Pages : 624
Book Description
Designing and manufacturing structures of all kinds in an economic and a safe way is not possible without doing experimental stress analysis. The modernity of structures, with their higher reliability demands, as well as today's more stringent safety rules and extreme environmental conditions necessitate the improvement of the measuring technique and the introduction of new ones. Although theoretical/mathematical analysis is improving enormously, an example of which is the finite element model, it cannot replace experimental analysis and vice versa. Moreover, the mathematical analysis needs more and more accurate parameter data which in turn need improved experimental investigations. No one can do all those investigations on his own. Exchange of knowledge and experience in experimental stress analysis is a necessity, a thing acknowledged by every research worker. Therefore, the objective of the Permanent Committee for Stress Analysis (PC SA) is to promote the organization of conferences with the purpose disseminating new research and new measuring techniques as well as improvements in existing techniques, and furthermore, to promote the exchange of experiences of practical applications with techniques. rhis Vlllth International Conference on Experimental Stress Analysis on behalf of the PC SA is one in a series which started in 1959 at Delft (NL), and was followed by conferences at Paris (F), Berlin-W, Cambridge (~K), Udine (I), Munich (FRG) and Haifa (Isr.). Such a Conference will be held in Europe every fourth year, half-way bewteen the IUTAM Congresses.
Author: George C. Sih Publisher: Springer Science & Business Media ISBN: 9400983379 Category : Science Languages : en Pages : 407
Book Description
Experiments on fracture of materials are made for various purposes. Of primary importance are those through which criteria predicting material failure by deformation and/or fracture are investigated. Since the demands of engineering application always precede the development of theories, there is another kind of experiment where conditions under which a particular material can fail are simulated as closely as possible to the operational situation but in a simplified and standardized form. In this way, many of the parameters corresponding to fracture such as toughness, Charpy values, crack opening distance (COD), etc. are measured. Obviously, a sound knowledge of the physical theories governing material failure is necessary as the quantity of interest can seldom be evaluated in a direct manner. Critical stress intensity factors and critical energy release rates are examples. Standard test of materials should be distinguished from basic experi ments. They are performed to provide routine information on materials responding to certain conditions of loading or environment. The tension test with or without a crack is among one of the most widely used tests. Because they affect the results, with size and shape of the specimen, the rate of loading, temperature and crack configuration are standardized to enable comparison and reproducibility of results. The American Society for Testing Materials (ASTM) provides a great deal of information on recommended procedures and methods of testing. The objective is to standardize specifications for materials and definition of technical terms.
Author: Andrey A. Radionov Publisher: Springer ISBN: 3319956302 Category : Technology & Engineering Languages : en Pages : 2368
Book Description
This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 4th International Conference on Industrial Engineering (ICIE), held in Moscow, Russia in May 2018. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Author: Alessandro Freddi Publisher: Springer ISBN: 3319060864 Category : Science Languages : en Pages : 509
Book Description
This book summarizes the main methods of experimental stress analysis and examines their application to various states of stress of major technical interest, highlighting aspects not always covered in the classic literature. It is explained how experimental stress analysis assists in the verification and completion of analytical and numerical models, the development of phenomenological theories, the measurement and control of system parameters under operating conditions, and identification of causes of failure or malfunction. Cases addressed include measurement of the state of stress in models, measurement of actual loads on structures, verification of stress states in circumstances of complex numerical modeling, assessment of stress-related material damage, and reliability analysis of artifacts (e.g. prostheses) that interact with biological systems. The book will serve graduate students and professionals as a valuable tool for finding solutions when analytical solutions do not exist.
Author: Holm Altenbach Publisher: Springer Nature ISBN: 3031220935 Category : Technology & Engineering Languages : en Pages : 261
Book Description
This book presents the theoretical and experimental foundations of quasi-static deformation of elastoplastic and viscoplastic materials and structural elements made of them. Experimental studies of deformation and fracture of materials under complex loading under impulse influences are described and discussed. A short introduction of theoretical and numerical methods for studying the stress–strain state of elastoplastic structural elements under dynamic, impulse loading and their interaction with other media is given.
Author: Glenn C. Grimes Publisher: ASTM International ISBN: 0803114265 Category : Composite materials Languages : en Pages : 465
Book Description
Annotation In papers presented at the Tenth ASTM Conference on Composite Materials, held in San Francisco, April 1990, important composite materials technical issues are discussed in eight sections: compression test methodology analysis and development; general test methodology analysis and development; material mechanical properties and failure criteria; advanced materials analysis and test; analysis, test, and certification of structure; quality assurance and process control; interlaminar fracture analysis and test; and damage, flows, and repair. Member price, $95. Annotation copyrighted by Book News, Inc., Portland, OR.
Author: Y. C. Wang Publisher: Taylor & Francis ISBN: 1351413937 Category : Technology & Engineering Languages : en Pages : 1099
Book Description
Over 150 papers representing the most recent international research findings on steel and composite structures. Including steel constructions; buckling and stability; codes; composite; control; fatigue and fracture; fire; impact; joints; maintenance; plates and shells; retrofitting; seismic; space structures; steel; structural analysis; structural components and assemblies; thin-walled structures; vibrations, and wind. A special session is dedicated on codification. A valuable source of information to researchers and practitioners in the field of steel and composite structures.
Author: Josef Singer Publisher: John Wiley & Sons ISBN: 0471974501 Category : Technology & Engineering Languages : en Pages : 1140
Book Description
* Edited by Josef Singer, the world's foremost authority on structural buckling. * Time-saving and cost-effective design data for all structural, mechanical, and aerospace engineering researchers.
Author: H. Wieringa
Author: George C. Sih
Author: Andrey A. Radionov
Author: Alessandro Freddi
Author: Holm Altenbach
Author: 
Author: Glenn C. Grimes
Author: Y. C. Wang
Author: 
Author: Josef Singer