Preparation and Characterization of Cobalt Based and Zinc Promoted Catalyst Fro Fisher Tropsch Synthesis PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Preparation and Characterization of Cobalt Based and Zinc Promoted Catalyst Fro Fisher Tropsch Synthesis PDF full book. Access full book title Preparation and Characterization of Cobalt Based and Zinc Promoted Catalyst Fro Fisher Tropsch Synthesis by Nur Hayati Zulkefli. Download full books in PDF and EPUB format.
Author: Nur Hayati Zulkefli Publisher: ISBN: Category : Catalysts Languages : en Pages : 58
Book Description
The purpose of this research is to compare the characterization of SBA-15 and TiO2 supported cobalt catalyst for Fischer-Tropsch synthesis based on effect of cobalt loading. In order to complete this research, the catalyst must be prepared by incipient wetness impregnation method. The catalysts were prepared with different cobalt loading, which are 5%, 10% and 15% and using zinc as a promoter. To characterize these catalysts, different methods were used. First of all, characterization of SBA-15 and TiO2 were compared by using Fourier Transform Infrared Spectroscopy (FTIR). Then the catalysts were tested using Scanning Electron Microscope (SEM). Through this characterization, the surface of catalysts was compared. The surface structure of Co/SBA-15 is more ordered when compared to Co/TiO2 catalyst. This is compared by the SEM image taken. Therefore, Co/TiO2 is also a good catalyst with advantages when compared to Co/SBA-15 catalyst. The conclusion of this research when comparing the characterization of Co/SBA-15 and TiO2 catalysts, is Co/SBA-15 catalyst is a good catalyst when compared to Co/TiO2 catalyst.
Author: Nur Hayati Zulkefli Publisher: ISBN: Category : Catalysts Languages : en Pages : 58
Book Description
The purpose of this research is to compare the characterization of SBA-15 and TiO2 supported cobalt catalyst for Fischer-Tropsch synthesis based on effect of cobalt loading. In order to complete this research, the catalyst must be prepared by incipient wetness impregnation method. The catalysts were prepared with different cobalt loading, which are 5%, 10% and 15% and using zinc as a promoter. To characterize these catalysts, different methods were used. First of all, characterization of SBA-15 and TiO2 were compared by using Fourier Transform Infrared Spectroscopy (FTIR). Then the catalysts were tested using Scanning Electron Microscope (SEM). Through this characterization, the surface of catalysts was compared. The surface structure of Co/SBA-15 is more ordered when compared to Co/TiO2 catalyst. This is compared by the SEM image taken. Therefore, Co/TiO2 is also a good catalyst with advantages when compared to Co/SBA-15 catalyst. The conclusion of this research when comparing the characterization of Co/SBA-15 and TiO2 catalysts, is Co/SBA-15 catalyst is a good catalyst when compared to Co/TiO2 catalyst.
Author: Burtron H. Davis Publisher: CRC Press ISBN: 1466555300 Category : Science Languages : en Pages : 424
Book Description
This book is based on a symposium held during the 248th American Chemical Society meeting that focused on use of the Fischer-Tropsch process in producing synthetic fuels. Its contents reflect the four dominant subjects of the meeting: catalyst preparation and activation, catalyst activity and reaction mechanisms, catalyst characterization and related reactions, and topics concerning commercializing the Fischer-Tropsch process. It covers recent developments related to renewable resources and green energy and provides a glimpse of the commercial potential of the Fischer-Tropsch process in synthetic fuel production.
Author: Muhammad Suhaimi Man Publisher: ISBN: Category : Catalysis Languages : en Pages : 48
Book Description
Fischer-Tropsch synthesis (FTS) is a part of gas-to-liquids (GTL) technology, which produces synthetic liquid hydrocarbons from natural gas. Recently the production of clean fuels and particularly of synthetic diesel by means of the FTS process has aroused renewed interest in both industrial and academic field. This process was shown to be catalyzed by certain transition metals, such as Co which present the highest activity. This research work is about the synthesis of SBA-15 and preparation of catalyst with different promoter Zr, Zn, Mn - Co based supported by SBA-15 by wet impregnation catalysts and characterizes all sampling. All materials were characterized by several physico-chemical techniques such as TGA, SEM and FTIR. The catalytic and characterization results show a great influence of mesoporous support porosity on the structure, reducibility and FTS catalytic behavior of cobalt oxide species supported over these ordered materials. After modification of SBA-15 by Co with different loading, the particles found to be attached closely with each other. The SEM picture shows a large number of SBA-15 particles attaching closely with one another. So this will make catalyst more efficient and effective during FT process. Then, using FTIR, the functional groups will be observed with certain wavelength in the samples such as cobalt oxides, Si-O-Si, Si-CH3, zinc oxide, OH band, Si-C, and others. Besides that, the identification of metal inside SBA-15 was determined by comparing the pure SBA-15 with the incorporated metal on SBA-15. For this research, the characterization of the catalyst by selecting Zn as promoter have quiet similar characterization with noble metal that already investigate.
Author: Wilson D. Shafer Publisher: MDPI ISBN: 303928388X Category : Science Languages : en Pages : 414
Book Description
Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.
Author: Adnan Khalil Oues Publisher: ISBN: Category : Languages : en Pages : 90
Book Description
A Fischer-Tropsch catalyst composed of cobalt supported on alumina was prepared. This catalyst was cobalt/alumina (Co/AL2 O3 ). The physical characterization of the catalyst was conducted using surface area analysis through the BET method, and particle size analysis. Fischer-Tropsch experiments were conducted in a fixed bed reactor. A flow rate of 100sml/min was selected based experimentally. Two temperatures were 330, and 350°C, and three different pressures as follows 145, 217.6, and 290 psig. The results were evaluated and studied based on conversion of hydrogen and carbon monoxide, in addition to selectivity of products.
Author: C. H. Bartholomew Publisher: John Wiley & Sons ISBN: 1118209737 Category : Technology & Engineering Languages : en Pages : 1224
Book Description
Catalysis is central to the chemical industry, as it is directly or involved in the production of almost all useful chemical products. In this book the authors, present the definitive account of industrial catalytic processes. Throughout Fundamentals of Industrial Catalytic Processes the information is illustrated with many case studies and problems. This book is valuable to anyone wanting a clear account of industrial catalytic processes, but is particularly useful to industrial and academic chemists and engineers and graduate working on catalysis. This book also: Covers fundamentals of catalytic processes, including chemistry, catalyst preparation, properties and reaction engineering. Addresses heterogeneous catalytic processes employed by industry. Provides detailed data on existing catalysts and catalytic reactions, process design and chemical engineering. Covers catalysts used in fuel cells.
Author: Nur Hayati Zulkefli
Author: Nur Hayati Zulkefli
Author: Burtron H. Davis
Author: Muhammad Suhaimi Man
Author: John F. Shultz
Author: Wilson D. Shafer
Author: Adnan Khalil Oues
Author: William Douglas Kostka
Author: 
Author: Nobuntu Ntombentsundu Madikizela
Author: C. H. Bartholomew