Author: John Baxter
Publisher: Nordic Council of Ministers
ISBN: 9289339969
Category :
Languages : en
Pages : 83
Book Description
This project identifies improvements in plastics recycling from Nordic electronic waste. Limited improvement is possible through modest changes in the existing value chain, such as ensuring that wastes are directed as intended. But for the most part, enhanced plastics recycling implies higher costs. The necessary changes could be driven in part through revised policy and regulatory instruments. These changes might, in turn, encourage more positive engagement from electronics producers. The report is part of the Nordic Prime Ministers' overall green growth initiative: “The Nordic Region – leading in green growth”. Read more in the web magazine “Green Growth the Nordic Way” at www.nordicway.org or at www.norden.org/greengrowth
Plastic value chains: Case: WEEE (Waste Electrical and Electronic Equipment)
Author: John Baxter
Publisher: Nordic Council of Ministers
ISBN: 9289339969
Category :
Languages : en
Pages : 83
Book Description
This project identifies improvements in plastics recycling from Nordic electronic waste. Limited improvement is possible through modest changes in the existing value chain, such as ensuring that wastes are directed as intended. But for the most part, enhanced plastics recycling implies higher costs. The necessary changes could be driven in part through revised policy and regulatory instruments. These changes might, in turn, encourage more positive engagement from electronics producers. The report is part of the Nordic Prime Ministers' overall green growth initiative: “The Nordic Region – leading in green growth”. Read more in the web magazine “Green Growth the Nordic Way” at www.nordicway.org or at www.norden.org/greengrowth
Publisher: Nordic Council of Ministers
ISBN: 9289339969
Category :
Languages : en
Pages : 83
Book Description
This project identifies improvements in plastics recycling from Nordic electronic waste. Limited improvement is possible through modest changes in the existing value chain, such as ensuring that wastes are directed as intended. But for the most part, enhanced plastics recycling implies higher costs. The necessary changes could be driven in part through revised policy and regulatory instruments. These changes might, in turn, encourage more positive engagement from electronics producers. The report is part of the Nordic Prime Ministers' overall green growth initiative: “The Nordic Region – leading in green growth”. Read more in the web magazine “Green Growth the Nordic Way” at www.nordicway.org or at www.norden.org/greengrowth
Plastic value chains
Author: John Baxter
Publisher: Nordic Council of Ministers
ISBN: 9289328029
Category :
Languages : en
Pages : 87
Book Description
This project identifies thousands of tonnes per annum of potential enhanced plastics recycling from Nordic electronic waste. Plastics recycling does not always feature prominently in waste treatment. Recycling is technologically viable although the market and economic landscape is challenging. Easy export markets for waste plastic are largely closed and near-source treatment is increasingly needed. Concerns include issues of quality and worries about hazardous materials. Positively engaging electronics producers - beyond the bare punitive requirements within extended responsibility schemes – is a crucial driver for further developments. The report is part of the Nordic Prime Ministers’ overall green growth initiative: “The Nordic Region – leading in green growth”. Read more in the web magazine “Green Growth the Nordic Way” at www.nordicway. org or at www.norden.org/greengrowth The report for Part 2 will be published in December 2014.
Publisher: Nordic Council of Ministers
ISBN: 9289328029
Category :
Languages : en
Pages : 87
Book Description
This project identifies thousands of tonnes per annum of potential enhanced plastics recycling from Nordic electronic waste. Plastics recycling does not always feature prominently in waste treatment. Recycling is technologically viable although the market and economic landscape is challenging. Easy export markets for waste plastic are largely closed and near-source treatment is increasingly needed. Concerns include issues of quality and worries about hazardous materials. Positively engaging electronics producers - beyond the bare punitive requirements within extended responsibility schemes – is a crucial driver for further developments. The report is part of the Nordic Prime Ministers’ overall green growth initiative: “The Nordic Region – leading in green growth”. Read more in the web magazine “Green Growth the Nordic Way” at www.nordicway. org or at www.norden.org/greengrowth The report for Part 2 will be published in December 2014.
Plastic Waste Markets
Author: David McKinnon
Publisher: Nordic Council of Ministers
ISBN: 9289355727
Category : Technology & Engineering
Languages : en
Pages : 85
Book Description
This project examines the market for recycled plastic, with a primary focus on post-consumer plastic waste because this is considered to be the more problematic. The market for plastic waste generated in manufacturing and production is relatively strong and well-functioning; As a consequence, the majority of plastic waste from manufacturing and production is recycled. Post-consumer waste is much less homogenous: it comes from a wide variety of sources, and contains a wide variety of plastics and tends to be difficult to collect, sort, and recycle. This project identifies barriers to further utilisation of recycled plastics, and analyses a collection of policy tools that could be used to support and expand that market.
Publisher: Nordic Council of Ministers
ISBN: 9289355727
Category : Technology & Engineering
Languages : en
Pages : 85
Book Description
This project examines the market for recycled plastic, with a primary focus on post-consumer plastic waste because this is considered to be the more problematic. The market for plastic waste generated in manufacturing and production is relatively strong and well-functioning; As a consequence, the majority of plastic waste from manufacturing and production is recycled. Post-consumer waste is much less homogenous: it comes from a wide variety of sources, and contains a wide variety of plastics and tends to be difficult to collect, sort, and recycle. This project identifies barriers to further utilisation of recycled plastics, and analyses a collection of policy tools that could be used to support and expand that market.
Designing plastics circulation:
Author: Anne Raudaskoski
Publisher: Nordic Council of Ministers
ISBN: 9289362065
Category : Science
Languages : en
Pages : 41
Book Description
Presently most electrical/electronic equipment (EEE) is not designed for recycling, let alone for circulation. Plastics in these products account for 20% of material use, and through better design, significant environmental and financial savings could be gained. Technological solutions and circular design opportunities already exist, but they haven’t been implemented yet. Some challenges, such as ease of disassembly, could be resolved through better communication and by sharing learnings across the value chain.Instead of WEEE, we should focus on developing CEEE: Circular Electrical and Electronic Equipment.The case examples of this report show how different stages of the lifecycle can be designed so that plastics circulation becomes possible and makes business sense. It is time to take a leap in material flow management and scale up these circular solutions across the industry.
Publisher: Nordic Council of Ministers
ISBN: 9289362065
Category : Science
Languages : en
Pages : 41
Book Description
Presently most electrical/electronic equipment (EEE) is not designed for recycling, let alone for circulation. Plastics in these products account for 20% of material use, and through better design, significant environmental and financial savings could be gained. Technological solutions and circular design opportunities already exist, but they haven’t been implemented yet. Some challenges, such as ease of disassembly, could be resolved through better communication and by sharing learnings across the value chain.Instead of WEEE, we should focus on developing CEEE: Circular Electrical and Electronic Equipment.The case examples of this report show how different stages of the lifecycle can be designed so that plastics circulation becomes possible and makes business sense. It is time to take a leap in material flow management and scale up these circular solutions across the industry.
Circular plastics in electrical and electronic equipment
Author: Bauer, Bjørn
Publisher: Nordic Council of Ministers
ISBN: 9289372095
Category : Technology & Engineering
Languages : en
Pages : 95
Book Description
Available online: https://pub.norden.org/temanord2021-553/ This report explores what the Nordic countries can do to promote the use of recyclable plastic components in electrical and electronic products, with particular focus on minimising their hazardous chemical component. The report provides an overview of the hazardous additives currently used in the plastic components of EEE, drawing on information available from legislation and supporting studies, research and academia, NGOs and market actors. The results presented here build upon input collected though a literature study, a policy analysis of EU and Nordic legislation and initiatives, interviews with experts across the value chain and an expert workshop. Together these inputs were used to assess and qualify possible future actions in the Nordic countries to minimise hazardous chemicals in plastic components of EEE.
Publisher: Nordic Council of Ministers
ISBN: 9289372095
Category : Technology & Engineering
Languages : en
Pages : 95
Book Description
Available online: https://pub.norden.org/temanord2021-553/ This report explores what the Nordic countries can do to promote the use of recyclable plastic components in electrical and electronic products, with particular focus on minimising their hazardous chemical component. The report provides an overview of the hazardous additives currently used in the plastic components of EEE, drawing on information available from legislation and supporting studies, research and academia, NGOs and market actors. The results presented here build upon input collected though a literature study, a policy analysis of EU and Nordic legislation and initiatives, interviews with experts across the value chain and an expert workshop. Together these inputs were used to assess and qualify possible future actions in the Nordic countries to minimise hazardous chemicals in plastic components of EEE.
E-Waste in Transition
Author: Florin-Constantin Mihai
Publisher: BoD – Books on Demand
ISBN: 9535124994
Category : Technology & Engineering
Languages : en
Pages : 192
Book Description
E-waste management is a serious challenge across developed, transition, and developing countries because of the consumer society and the globalization process. E-waste is a fast-growing waste stream which needs more attention of international organizations, governments, and local authorities in order to improve the current waste management practices. The book reveals the pollution side of this waste stream with critical implications on the environment and public health, and also it points out the resource side which must be further developed under the circular economy framework with respect to safety regulations. In this context, complicated patterns at the global scale emerge under legal and illegal e-waste trades. The linkages between developed and developing countries and key issues of e-waste management sector are further examined in the book.
Publisher: BoD – Books on Demand
ISBN: 9535124994
Category : Technology & Engineering
Languages : en
Pages : 192
Book Description
E-waste management is a serious challenge across developed, transition, and developing countries because of the consumer society and the globalization process. E-waste is a fast-growing waste stream which needs more attention of international organizations, governments, and local authorities in order to improve the current waste management practices. The book reveals the pollution side of this waste stream with critical implications on the environment and public health, and also it points out the resource side which must be further developed under the circular economy framework with respect to safety regulations. In this context, complicated patterns at the global scale emerge under legal and illegal e-waste trades. The linkages between developed and developing countries and key issues of e-waste management sector are further examined in the book.
Policy Brief - Recycling in the Circular Economy:
Author: Birgit Elin Munck-Kampmann
Publisher: Nordic Council of Ministers
ISBN: 9289357703
Category : Business & Economics
Languages : en
Pages : 64
Book Description
Publisher: Nordic Council of Ministers
ISBN: 9289357703
Category : Business & Economics
Languages : en
Pages : 64
Book Description
Hazardous substances in plastics
Author: Stenmarck, Åsa
Publisher: Nordic Council of Ministers
ISBN: 9289348496
Category :
Languages : en
Pages : 121
Book Description
The aim of the project is to create knowledge on how plastics recycling can increase without increasing the risk of emitting hazardous substances to the environment.The first general conclusion is that to be able to increase recycling there are measures needed at different levels. The following areas are of interest: • Legislation: new legislation is not necessary, but harmonisation and clear guidance to the existing one is. • Market: to create a market safety on content is needed. • If substances added are less hazardous the recycled raw material would be “more safe” to use. • There should be higher attention put on the knowledge of the recyclers. • Traceability and content: Further work on labelling reaching the recycle part of the value chain needs to be developed. It is also needed to develop a systematic approach towards risk assessments linked to recycling.
Publisher: Nordic Council of Ministers
ISBN: 9289348496
Category :
Languages : en
Pages : 121
Book Description
The aim of the project is to create knowledge on how plastics recycling can increase without increasing the risk of emitting hazardous substances to the environment.The first general conclusion is that to be able to increase recycling there are measures needed at different levels. The following areas are of interest: • Legislation: new legislation is not necessary, but harmonisation and clear guidance to the existing one is. • Market: to create a market safety on content is needed. • If substances added are less hazardous the recycled raw material would be “more safe” to use. • There should be higher attention put on the knowledge of the recyclers. • Traceability and content: Further work on labelling reaching the recycle part of the value chain needs to be developed. It is also needed to develop a systematic approach towards risk assessments linked to recycling.
Plastic Value Chains
Author:
Publisher:
ISBN: 9789289328463
Category :
Languages : en
Pages : 84
Book Description
This project identifies thousands of tonnes per annum of potential enhanced plastics recycling from Nordic electronic waste. Plastics recycling does not always feature prominently in waste treatment. Recycling is technologically viable although the market and economic landscape is challenging. Easy export markets for waste plastic are largely closed and near-source treatment is increasingly needed. Concerns include issues of quality and worries about hazardous materials. Positively engaging electronics producers - beyond the bare punitive requirements within extended responsibility schemes - is a crucial driver for further developments. The report is part of the Nordic Prime Ministers' overall green growth initiative: "The Nordic Region - leading in green growth". Read more in the web magazine "Green Growth the Nordic Way" at www.nordicway. org or at www.norden.org/greengrowthThe report for Part 2 will be published in December 2014.
Publisher:
ISBN: 9789289328463
Category :
Languages : en
Pages : 84
Book Description
This project identifies thousands of tonnes per annum of potential enhanced plastics recycling from Nordic electronic waste. Plastics recycling does not always feature prominently in waste treatment. Recycling is technologically viable although the market and economic landscape is challenging. Easy export markets for waste plastic are largely closed and near-source treatment is increasingly needed. Concerns include issues of quality and worries about hazardous materials. Positively engaging electronics producers - beyond the bare punitive requirements within extended responsibility schemes - is a crucial driver for further developments. The report is part of the Nordic Prime Ministers' overall green growth initiative: "The Nordic Region - leading in green growth". Read more in the web magazine "Green Growth the Nordic Way" at www.nordicway. org or at www.norden.org/greengrowthThe report for Part 2 will be published in December 2014.
Towards Circular Economy: Closing the Loop with Chemical Recycling of Solid Plastic Waste
Author:
Publisher: Academic Press
ISBN: 0323957714
Category : Technology & Engineering
Languages : en
Pages : 330
Book Description
Advances in Chemical Engineering serial, Volume 60 highlights new advances in the field with this new volume presenting interesting chapters. Each chapter is written by an international board of authors. - Provides the authority and expertise of leading contributors from an international board of authors - Presents the latest release in the Advances in Chemical Engineering series - Includes the latest information on the Circular Economy: Closing the Loop with Chemical Recycling of Solid Plastic Waste
Publisher: Academic Press
ISBN: 0323957714
Category : Technology & Engineering
Languages : en
Pages : 330
Book Description
Advances in Chemical Engineering serial, Volume 60 highlights new advances in the field with this new volume presenting interesting chapters. Each chapter is written by an international board of authors. - Provides the authority and expertise of leading contributors from an international board of authors - Presents the latest release in the Advances in Chemical Engineering series - Includes the latest information on the Circular Economy: Closing the Loop with Chemical Recycling of Solid Plastic Waste