Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 29
Book Description
Physical Properties of Zirconium and Zirconium-Uranium Alloys
Physical Metallurgy and Properties of Zirconium-uranium Alloys
Author: Arthur A. Bauer
Publisher:
ISBN:
Category : Uranium alloys
Languages : en
Pages : 23
Book Description
Publisher:
ISBN:
Category : Uranium alloys
Languages : en
Pages : 23
Book Description
A Study of the Explosive Properties of Uranium-zirconium Alloys
Author: Robert P. Larsen
Publisher:
ISBN:
Category : Chemical reactions
Languages : en
Pages : 48
Book Description
The prevention of explosions during pickling, etching or dissolution of these alloys has been studied; recommendations are made for safe handling. An unclassified safety film on this subject is available for distribution to interested laboratories.
Publisher:
ISBN:
Category : Chemical reactions
Languages : en
Pages : 48
Book Description
The prevention of explosions during pickling, etching or dissolution of these alloys has been studied; recommendations are made for safe handling. An unclassified safety film on this subject is available for distribution to interested laboratories.
AN EVALUATION OF THE PROPERTIES AND BEHAVIOR OF ZIRCONIUM-URANIUM ALLOYS.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Data from a survey of the literature and other available information on zirconium--uranium alloys have been reviewed for the purpose of obtaining a coherent picture of current knowledge about the properties and behavior of zirconium--uranium alloys. The results of the survey were used to revise and extend the presentation of material gathered earlier in a similar study and reported in BMI1030 in August 1955. The constitution of zirconium-uranium alloys is discussed, and a constitutional diagram for the system is presented. The effects of oxygen and nitrogen, which are present in these alloys as contaminants, on alloy constitution ars shownin the form of ternary diagrams and in terms of their quantitative effects on the phases present. The transformation kinetics and the nature of the transformation of the high-temperature body- centered-cubic gamma phase to the phases stable at room temperature are described. Two regions are discussed: in the 20 to 70 wi. % uranium composition range, gamma, which is retained on quenching, transforms isothermally to the intermediate epsilon-phase structure by a diffusion-controlled nucleation-and- growth process; in alloys containing less than 20 wt.% uranium, gamma transforms martensitically to a strained alpha-zirconium structure on quenching, with the diffusion-controlled transformation of gamma to either epsilon or alpha proceeding above the M/sub s/ temperature. Typical zirconium -- uranium alloy microstructures produced by working and by various heat treatments are shown, and a correlation of the structure with the manner in which it was produced and the resultant mechanical properties is attempted. Hardness, tensile, and creep data for zirconium--uranium alloys are tabulated and evaluated in terms of alloy constitution and transformation-kinetics behavior. Physical-property data for zirconium-uranium alloys are presented in tabular and graphical form. The best fabrication techniques for forging, hot and cold rolling, extruding, and swaging are detailed. The corrosion resistance of zirconium-uranium alloys in wafer at various temperatures and corrosion behavior as affected by alloy constitution are discussed. The effect of ternary additions on corrosion resistance is discussed, and pertinent data are tabulated. The influence of zircocium -uranium alloy constitution and properties on neutronirradiation behavior is discussed, and the general effects of irradiation upon these alloys are summarized. (auth).
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Data from a survey of the literature and other available information on zirconium--uranium alloys have been reviewed for the purpose of obtaining a coherent picture of current knowledge about the properties and behavior of zirconium--uranium alloys. The results of the survey were used to revise and extend the presentation of material gathered earlier in a similar study and reported in BMI1030 in August 1955. The constitution of zirconium-uranium alloys is discussed, and a constitutional diagram for the system is presented. The effects of oxygen and nitrogen, which are present in these alloys as contaminants, on alloy constitution ars shownin the form of ternary diagrams and in terms of their quantitative effects on the phases present. The transformation kinetics and the nature of the transformation of the high-temperature body- centered-cubic gamma phase to the phases stable at room temperature are described. Two regions are discussed: in the 20 to 70 wi. % uranium composition range, gamma, which is retained on quenching, transforms isothermally to the intermediate epsilon-phase structure by a diffusion-controlled nucleation-and- growth process; in alloys containing less than 20 wt.% uranium, gamma transforms martensitically to a strained alpha-zirconium structure on quenching, with the diffusion-controlled transformation of gamma to either epsilon or alpha proceeding above the M/sub s/ temperature. Typical zirconium -- uranium alloy microstructures produced by working and by various heat treatments are shown, and a correlation of the structure with the manner in which it was produced and the resultant mechanical properties is attempted. Hardness, tensile, and creep data for zirconium--uranium alloys are tabulated and evaluated in terms of alloy constitution and transformation-kinetics behavior. Physical-property data for zirconium-uranium alloys are presented in tabular and graphical form. The best fabrication techniques for forging, hot and cold rolling, extruding, and swaging are detailed. The corrosion resistance of zirconium-uranium alloys in wafer at various temperatures and corrosion behavior as affected by alloy constitution are discussed. The effect of ternary additions on corrosion resistance is discussed, and pertinent data are tabulated. The influence of zircocium -uranium alloy constitution and properties on neutronirradiation behavior is discussed, and the general effects of irradiation upon these alloys are summarized. (auth).
Tensile-creep Properties at 500 F of Zirconium and a 3.66 Per Cent Uranium Alloy of Zirconium
Author: A. D. Schwope
Publisher:
ISBN:
Category : Uranium alloys
Languages : en
Pages : 16
Book Description
Publisher:
ISBN:
Category : Uranium alloys
Languages : en
Pages : 16
Book Description
Contamination of Zirconium-uranium by Recycling of Scrap
Author: L. F. Cochrun
Publisher:
ISBN:
Category : Reactor fuel reprocessing
Languages : en
Pages : 34
Book Description
Publisher:
ISBN:
Category : Reactor fuel reprocessing
Languages : en
Pages : 34
Book Description
Zirconium alloys part 1. physical properties
Computational Properties of Uranium-zirconium
Author: Alexander Patrick Moore
Publisher:
ISBN:
Category : Atoms
Languages : en
Pages :
Book Description
The metallic binary-alloy fuel Uranium-Zirconium is important for use in the new generation of advanced fast reactors. Uranium-Zirconium goes through a phase transition at higher temperatures to a (gamma) Body Centered Cubic (BCC) phase. The BCC high temperature phase is particularly important since it corresponds to the temperature range in which the fast reactors will operate. A semi-empirical Modified Embedded Atom Method (MEAM) potential is presented for Uranium-Zirconium. This is the first interatomic potential created for the U-Zr system. The bulk physical properties of the Uranium-Zirconium binary alloy were reproduced using Molecular Dynamics (MD) and Monte Carlo (MC) simulations with the MEAM potential. The simulation of bulk metallic alloy separation and ordering phenomena on the atomic scale using iterative MD and MC simulations with interatomic potentials has never been done before. These simulations will help the fundamental understanding of complex phenomena in the metallic fuels. This is a large step in making a computationally acceptable fuel performance code, able to replicate and predict fuel behavior.
Publisher:
ISBN:
Category : Atoms
Languages : en
Pages :
Book Description
The metallic binary-alloy fuel Uranium-Zirconium is important for use in the new generation of advanced fast reactors. Uranium-Zirconium goes through a phase transition at higher temperatures to a (gamma) Body Centered Cubic (BCC) phase. The BCC high temperature phase is particularly important since it corresponds to the temperature range in which the fast reactors will operate. A semi-empirical Modified Embedded Atom Method (MEAM) potential is presented for Uranium-Zirconium. This is the first interatomic potential created for the U-Zr system. The bulk physical properties of the Uranium-Zirconium binary alloy were reproduced using Molecular Dynamics (MD) and Monte Carlo (MC) simulations with the MEAM potential. The simulation of bulk metallic alloy separation and ordering phenomena on the atomic scale using iterative MD and MC simulations with interatomic potentials has never been done before. These simulations will help the fundamental understanding of complex phenomena in the metallic fuels. This is a large step in making a computationally acceptable fuel performance code, able to replicate and predict fuel behavior.
Materials. zirconium alloys part 1. physical properties
Examination and Properties of Uranium Alloys
Author: Henry A. Saller
Publisher:
ISBN:
Category : Uranium
Languages : en
Pages : 26
Book Description
Publisher:
ISBN:
Category : Uranium
Languages : en
Pages : 26
Book Description