Author: Henry J. RossellPublisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 226
Book Description
Phase Relationships in the System Thorium-carbon
Author: Henry J. RossellPublisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 226
Book Description
Thorium-carbon System
Author: P. ChiottiPublisher:
ISBN:
Category : Thorium
Languages : en
Pages : 62
Book Description
A study of the thorium-carbon system has been made and a tentative phase diagram constructed from metallographic X-ray, and melting point data. The existence of two compounds, ThC (4.92% carbon) and ThC2 (9.38% carbon), has been verified. No conclusive evidence was found for any other compound. The monocarbide has a sodium chloride type structure, and the lattice constant for this compound is shown to be 5.34 A. This is considerably larger than the lattice constant previously reported for the monocarbide. It is shown that the lattice constant previously measured was that of a solid solution of thorium in thorium monocarbide. The lattice constant at room temperature for the monocarbide phase increases from 5.29 to 5.34 A as the carbon content is increased from about 3.8 to 4.92%. The monocarbide melts at 2625 +/- 25 C and the dicarbide at 2655 +/- 25 C. All compositions between thorium and the monocarbide show complete miscibility in the liquid state and in the solid state at elevated temperatures. However, an immiscibility gap in the solid solution area appears to extend from room temperature to just under the solidus line. The peak of this gap is at about 2% carbon and 1975 C. The compositions of the thorium rich and carbon rich solid solutions for this gap at room temperature are about 0.25% carbon and 3.8% carbon, respectively. The monocarbide and dicarbide also form a complete series of solid solutions at elevated temperatures but show little or no mutual solid solubility at room temperature. The dicarbide forms a eutectic with graphite containing approximately 12.6% carbon which melts at 2500 +/- 35 C.
Phase Equilibria in the Thorium-carbon System
Author: J. HenneyScientific and Technical Aerospace Reports
Author: Nuclear Science Abstracts
Author: Ultra-High Temperature Materials II
Author: Igor L. ShabalinPublisher: Springer
ISBN: 9402413022
Category : Technology & Engineering
Languages : en
Pages : 755
Book Description
This exhaustive work in three volumes and over 1300 pages provides a thorough treatment of ultra-high temperature materials with melting points over 2500 °C. The first volume focuses on Carbon and Refractory Metals, whilst the second and third are dedicated solely to Refractory compounds and the third to Refractory Alloys and Composites respectively. Topics included are physical (crystallographic, thermodynamic, thermo physical, electrical, optical, physico-mechanical, nuclear) and chemical (solid-state diffusion, interaction with chemical elements and compounds, interaction with gases, vapours and aqueous solutions) properties of the individual physico-chemical phases of carbon (graphite/graphene), refractory metals (W, Re, Os, Ta, Mo, Nb, Ir) and compounds (oxides, nitrides, carbides, borides, silicides) with melting points in this range. It will be of interest to researchers, engineers, postgraduate, graduate and undergraduate students alike. The reader is provided with the full qualitative and quantitative assessment for the materials, which could be applied in various engineering devices and environmental conditions at ultra-high temperatures, on the basis of the latest updates in the field of physics, chemistry, materials science and engineering.
A Compilation of Thorium Binary Phase Diagrams
Author: O. Norman CarlsonPublisher:
ISBN:
Category : Binary systems (Metallurgy)
Languages : en
Pages : 128
Book Description
ERDA Energy Research Abstracts
Author: United States. Energy Research and Development AdministrationPublisher:
ISBN:
Category : Medicine
Languages : en
Pages : 776
Book Description
Comprehensive Nuclear Materials
Author: Publisher: Elsevier
ISBN: 0081028660
Category : Science
Languages : en
Pages : 4871
Book Description
Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Information Circular
Author: Publisher:
ISBN:
Category : Mines and mineral resources
Languages : en
Pages : 998
Book Description