Author: Publisher:
ISBN:
Category : Asbestos
Languages : en
Pages : 34
Book Description
PEOSH Asbestos Standard for Construction, 29 CFR 1926.1101
Author: PEOSH General Asbestos Standard, 29 CFR 1910.1001
Author: Asbestos Standard for Construction Industry
Author: Asbestos Standard for the Construction Industry
Author: U. S. LaborPublisher: CreateSpace
ISBN: 9781478113225
Category :
Languages : en
Pages : 64
Book Description
OSHA 3096, Asbestos Standard for the Construction Industry. Asbestos is the generic term for a group of naturally occurring, fibrous minerals with high tensile strength, flexibility, and resistance to heat, chemicals, and electricity. In the construction industry, asbestos is found in installed products such as sprayed-on fireproofing, pipe insulation, floor tiles, cement pipe and sheet, roofing felts and shingles, ceiling tiles, fire-resistant drywall, drywall joint compounds, and acoustical products. Because very few asbestos containing products are being installed today, most worker exposures occur during the removal of asbestos and the renovation and maintenance of buildings and structures containing asbestos. Asbestos fibers enter the body when a person inhales or ingests airborne particles that become embedded in the tissues of the respiratory or digestive systems. Exposure to asbestos can cause disabling or fatal diseases such as asbestosis, an emphysema-like condition; lung cancer; mesothelioma, a cancerous tumor that spreads rapidly in the cells of membranes covering the lungs and body organs; and gastrointestinal cancer. The symptoms of these diseases generally do not appear for 20 or more years after initial exposure. The asbestos standard for the construction industry (29 CFR Part 1926.1101, see www.osha.gov) regulates asbestos exposure for the following activities: Demolishing or salvaging structures where asbestos is present; Removing or encapsulating asbestos-containing material (ACM); Constructing, altering, repairing, maintaining, or renovating asbestos-containing structures or substrates; Installing asbestos-containing products; Cleaning up asbestos spills/emergencies; Transporting, disposing, storing, containing; and housekeeping involving asbestos or asbestos-containing products on a construction site. Note: The standard does not apply to asbestos-containing asphalt roof coatings, cements, and mastics.
Asbestos Standard for General Industry
Author: Asbestos Standard for the Construction Industry and Lead in Construction
Author: Government InstitutesPublisher:
ISBN: 9780865875210
Category : Technology & Engineering
Languages : en
Pages : 81
Book Description
This book combines two booklets from the Occupational Safety and Health Administration on asbestos and lead in the construction industry and summarizes essential compliance information from Code of Federal Regulations Title 29 Part 1926.1101 and Part 1926.62.
Asbestos The Hazardous Fiber
Author: Melvin A. BenardePublisher: CRC Press
ISBN: 1351086820
Category : Technology & Engineering
Languages : en
Pages : 425
Book Description
With the passage of the Asbestos Hazard Emergency Response Act, AHERA, Public Law 99-519, it was clear that great quantities of asbestos would be disturbed and would require proper management and disposal. If these were poorly done, many people would be placed at risk unnecessarily.Into such an environment, a book dealing with the many diverse facets of asbestos abatement, written by people with substantial experience, seemed reasonable and appropriate, but even more so, necessary.
Asbestos Standard for the Shipyard Employment Industry
Author: Asbestos-containing materials in school buildings
Author: United States. Environmental Protection Agency. Office of Toxic SubstancesPublisher:
ISBN:
Category :
Languages : en
Pages : 144
Book Description
Construction Hazardous Materials Compliance Guide
Author: R. Dodge WoodsonPublisher: Elsevier
ISBN: 0124158412
Category : Architecture
Languages : en
Pages : 305
Book Description
Disturbing asbestos materials during construction is a serious hazard that all contractors may encounter. Because of the insidious nature of the material as a health hazard, EPA regulations require that even when a structure is to be completely demolished, asbestos (and all other hazardous materials) must be removed by a qualified contractor prior to general demolition. A construction contractor contemplating abatement work needs to ascertain regulatory applicability under one of the following: OSHA-approved state program, Federal OSHA regulations (applicable to the private sector and certain federal employees) or OSHA-approved. Construction Worksite Compliance Guide to Asbestos provides the contractors, building owners and inspectors with the current best management practices for asbestos removal and disposal methods. Packed with checklist, tables and "quick lookup" materials, this manual provides a step by step approach for identifying asbestos, complying with OSHA and EPA regulations as well as the safe disposal of asbestos. Ascertain the presence of asbestos through testing Prepare the abatement plan Submit the plan to the state, EPA or local municipality having jurisdiction Proper Waste Disposal techniques Scope of work