Author: Sidun Fang Publisher: Springer Nature ISBN: 9813367342 Category : Technology & Engineering Languages : en Pages : 211
Book Description
This open access book discusses the energy management for the multi-energy maritime grid, which is the local energy network installed in harbors, ports, ships, ferries, or vessels. The grid consists of generation, storage, and critical loads. It operates either in grid-connected or in islanding modes, under the constraints of both power system and transportation system. With full electrification, the future maritime grids, such as all-electric ships and seaport microgrids, will become “maritime multi-energy system” with the involvement of multiple energy, i.e., electrical power, fossil fuel, and heating/cooling power. With various practical cases, this book provides a cross-disciplinary view of the green and sustainable shipping via the energy management of maritime grids. In this book, the concepts and definitions of the multi-energy maritime grids are given after a comprehensive literature survey, and then the global and regional energy efficiency policies for the maritime transportation are illustrated. After that, it presents energy management methods under different scenarios for all-electric ships and electrified ports. At last, the future research roadmap are overviewed. The book is intended for graduate students, researchers, and professionals who are interested in the energy management of maritime transportation.
Author: Sasi K. Kottayil Publisher: CRC Press ISBN: 1000166082 Category : Technology & Engineering Languages : en Pages : 286
Book Description
This book addresses the need to understand the development, use, construction, and operation of smart microgrids (SMG). Covering selected major operations of SMG like dynamic energy management, demand response, and demand dispatch, it describes the design and operational challenges of different microgrids and provides feasible solutions for systems. Smart Micro Grid presents communication technologies and governing standards used in developing communication networks for realizing various smart services and applications in microgrids. An architecture facilitating bidirectional communication for smart distribution/microgrid is brought out covering aspects of its design, development and validation. The book is aimed at graduate, research students and professionals in power, power systems, and power electronics. Features: • Covers a broad overview of the benefits, the design and operation requirements, standards and communication requirements for deploying microgrids in distribution systems. • Explores issues related to planning, expansion, operation, type of microgrids, interaction among microgrid and distribution networks, demand response, and the technical requirements for the communication network. • Discusses current standards and common practices to develop and operate microgrids. • Describes technical issues and requirements for operating microgrids. • Illustrates smart communication architecture and protocols.
Author: Fekik, Arezki Publisher: IGI Global ISBN: 1799874494 Category : Technology & Engineering Languages : en Pages : 355
Book Description
The energy transition initiated in recent years has enabled the growing integration of renewable production into the energy mix. Microgrids make it possible to maximize the efficiency of energy transmission from source to consumer by bringing the latter together geographically and by reducing losses linked to transport. However, the lack of inertia and the micro-grid support system makes it weak, and energy storage is necessary to ensure its proper functioning. Current storage technologies do not make it possible to provide both a large capacity of energy and power at the same time. Hybrid storage is a solution that combines the advantages of several technologies and reduces their disadvantages. Modeling and Control of Static Converters for Hybrid Storage Systems covers the modeling, control theorems, and optimization techniques that solve many scientific problems for researchers in the field of power converter control for renewable energy hybrid storage and places particular emphasis on the modeling and control of static converters for hybrid storage systems. Covering topics ranging from energy storage to power generation, this book is ideal for automation engineers, electrical engineers, mechanical engineers, professionals, scientists, academicians, master's and doctoral students, and researchers in the disciplines of electrical and mechanical engineering.
Author: Ibrahim Din¿er Publisher: John Wiley & Sons ISBN: 111889443X Category : Technology & Engineering Languages : en Pages : 484
Book Description
An essential resource for optimizing energy systems to enhance design capability, performance and sustainability Optimization of Energy Systems comprehensively describes the thermodynamic modelling, analysis and optimization of numerous types of energy systems in various applications. It provides a new understanding of the system and the process of defining proper objective functions for determination of the most suitable design parameters for achieving enhanced efficiency, cost effectiveness and sustainability. Beginning with a general summary of thermodynamics, optimization techniques and optimization methods for thermal components, the book goes on to describe how to determine the most appropriate design parameters for more complex energy systems using various optimization methods. The results of each chapter provide potential tools for design, analysis, performance improvement, and greenhouse gas emissions reduction. Key features: Comprehensive coverage of the modelling, analysis and optimization of many energy systems for a variety of applications. Examples, practical applications and case studies to put theory into practice. Study problems at the end of each chapter that foster critical thinking and skill development. Written in an easy-to-follow style, starting with simple systems and moving to advanced energy systems and their complexities. A unique resource for understanding cutting-edge research in the thermodynamic analysis and optimization of a wide range of energy systems, Optimization of Energy Systems is suitable for graduate and senior undergraduate students, researchers, engineers, practitioners, and scientists in the area of energy systems.
Author: Nisith R. Mandal Publisher: Springer ISBN: 9811029555 Category : Technology & Engineering Languages : en Pages : 322
Book Description
This book addresses various aspects of ship construction, from ship types and construction materials, to welding technologies and accuracy control. The contents of the book are logically organized and divided into twenty-one chapters. The book covers structural arrangement with longitudinal and transverse framing systems based on the service load, and explains basic structural elements like hatch side girders, hatch end beams, stringers, etc. along with structural subassemblies like floors, bulkheads, inner bottom, decks and shells. It presents in detail double bottom construction, wing tanks & duct keels, fore & aft end structures, etc., together with necessary illustrations. The midship sections of various ship types are introduced, together with structural continuity and alignment in ship structures. With regard to construction materials, the book discusses steel, aluminum alloys and fiber reinforced composites. Various methods of steel material preparation are discussed, and plate cutting and forming of plates and sections are explained. The concept of line heating for plate bending is introduced.Welding power source characteristics, metal transfer mechanisms, welding parameters and their effects on the fusion zone, weld deposit, and weld bead profile are discussed in detail. Various fusion welding methods, MMAW, GMAW, SAW, Electroslag welding and Electrogas welding and single side welding are explained in detail. Friction stir welding as one of the key methods of solid state welding as applied to aluminum alloys is also addressed. The mechanisms of residual stress formation and distortion are explained in connection with stiffened panel fabrication, with an emphasis on weld induced buckling of thin panels. Further, the basic principles of distortion prevention, in-process distortion control and mitigation techniques like heat sinking, thermo-mechanical tensioning etc. are dealt with in detail. In its final section, the book describes in detail various types of weld defects that are likely to occur, together with their causes and remedial measures. The nondestructive testing methods that are most relevant to ship construction are explained. Lastly, a chapter on accuracy control based on statistical principles is included, addressing the need for a suitable mechanism to gauge the ranges of variations so that one can quantitatively target the end product accuracy.
Author: Clive Beggs Publisher: Routledge ISBN: 1136406697 Category : Architecture Languages : en Pages : 295
Book Description
With more and more concern being expressed over the Earth's dwindling energy resources as well as rising pollution levels, the subject of energy management and conservation is becoming increasingly important. Over half of all energy consumed is used in buildings so effective management of buildings whether commercial or domestic is vital. This book is a comprehensive text dealing with the theory and practice of the supply of energy to consumers, energy management and auditing and energy saving technology. It will be a core text on courses on energy management and building services, as well as updating professionals in the building sector.
Author: Information Resources Management Association Publisher: Engineering Science Reference ISBN: 9781668436660 Category : Microgrids (Smart power grids) Languages : en Pages :
Book Description
"This reference book covers the latest innovations and trends within smart grid and microgrid development, detailing benefits, challenges, and opportunities, that will help readers to fully understand the current opportunities that smart grids and microgrids present around the world"--
Author: Carlos Bordons Publisher: Springer Nature ISBN: 3030245705 Category : Technology & Engineering Languages : en Pages : 280
Book Description
The book shows how the operation of renewable-energy microgrids can be facilitated by the use of model predictive control (MPC). It gives readers a wide overview of control methods for microgrid operation at all levels, ranging from quality of service, to integration in the electricity market. MPC-based solutions are provided for the main control issues related to energy management and optimal operation of microgrids. The authors present MPC techniques for case studies that include different renewable sources – mainly photovoltaic and wind – as well as hybrid storage using batteries, hydrogen and supercapacitors. Experimental results for a pilot-scale microgrid are also presented, as well as simulations of scheduling in the electricity market and integration of electric and hybrid vehicles into the microgrid. in order to replicate the examples provided in the book and to develop and validate control algorithms on existing or projected microgrids. Model Predictive Control of Microgrids will interest researchers and practitioners, enabling them to keep abreast of a rapidly developing field. The text will also help to guide graduate students through processes from the conception and initial design of a microgrid through its implementation to the optimization of microgrid management. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Author: Marta Peris-Ortiz Publisher: Springer ISBN: 331940895X Category : Business & Economics Languages : en Pages : 231
Book Description
This volume provides the most current research on smart cities. Specifically, it focuses on the economic development and sustainability of smart cities and examines how to transform older industrial cities into sustainable smart cities. It aims to identify the role of the following elements in the creation and management of smart cities:• Citizen participation and empowerment • Value creation mechanisms • Public administration• Quality of life and sustainability• Democracy• ICT• Private initiatives and entrepreneurship Regardless of their size, all cities are ultimately agglomerations of people and institutions. Agglomeration economies make it possible to attain minimum efficiencies of scale in the organization and delivery of services. However, the economic benefits do not constitute the main advantage of a city. A city’s status rests on three dimensions: (1) political impetus, which is the result of citizens’ participation and the public administration’s agenda; (2) applications derived from technological advances (especially in ICT); and (3) cooperation between public and private initiatives in business development and entrepreneurship. These three dimensions determine which resources are necessary to create smart cities. But a smart city, ideal in the way it channels and resolves technological, social and economic-growth issues, requires many additional elements to function at a high-performance level, such as culture (an environment that empowers and engages citizens) and physical infrastructure designed to foster competition and collaboration, encourage new ideas and actions, and set the stage for new business creation. Featuring contributions with models, tools and cases from around the world, this book will be a valuable resource for researchers, students, academics, professionals and policymakers interested in smart cities.
Author: Mehdi Khosrow-Pour Publisher: ISBN: 9781522516712 Category : Renewable energy sources Languages : en Pages : 0
Book Description
Provides a comprehensive overview of emerging perspectives and innovations for alternative energy sources. Highlighting relevant concepts on energy efficiency, current technologies, and ongoing industry trends, this is an ideal reference source for academics, practitioners, professionals, and upper-level students interested in the latest research on renewable energy.
Author: Sidun Fang
Author: Sasi K. Kottayil
Author: Fekik, Arezki
Author: Ibrahim Din¿er
Author: Nisith R. Mandal
Author: Clive Beggs
Author: Information Resources Management Association
Author: Carlos Bordons
Author: Marta Peris-Ortiz
Author: Mehdi Khosrow-Pour