Author: Fernando F. Grinstein
Publisher: Cambridge University Press
ISBN: 9780521172721
Category : Technology & Engineering
Languages : en
Pages : 0
Book Description
The numerical simulation of turbulent flows is a subject of great practical importance to scientists and engineers. The difficulty in achieving predictive simulations is perhaps best illustrated by the wide range of approaches that have been developed and are still being used by the turbulence modeling community. In this book the authors describe one of these approaches, Implicit Large Eddy Simulation (ILES). ILES is a relatively new approach that combines generality and computational efficiency with documented success in many areas of complex fluid flow. This book synthesizes the theoretical basis of the ILES methodology and reviews its accomplishments. ILES pioneers and lead researchers combine here their experience to present a comprehensive description of the methodology. This book should be of fundamental interest to graduate students, basic research scientists, as well as professionals involved in the design and analysis of complex turbulent flows.
High Order Large Eddy Simulation for Shock-Boundary Layer Interaction Control by a Micro-ramp Vortex Generator
Author: Chaoqun Liu
Publisher: Bentham Science Publishers
ISBN: 1681085976
Category : Technology & Engineering
Languages : en
Pages : 321
Book Description
This volume presents an implicitly implemented large eddy simulation (ILES) by using the fifth order bandwidth-optimized WENO scheme. The chosen method is applied to make comprehensive studies on ramp flows with and without control at Mach 2.5 and Re=5760. Flow control in the form of microramp vortex generators (MVG) is applied. The results show that a MVG can distinctly reduce the separation zone at the ramp corner and lower the boundary layer shape factor under simulated conditions. A series of new findings about the MVG-ramp flow are obtained, including structures relevant to surface pressure, three-dimensional structures of the re-compression shock waves, a complete surface separation pattern, momentum deficit and a new secondary vortex system. A new mechanism of shock-boundary layer interaction control by MVG associated with a series of vortex rings is also presented. Vortex rings strongly interact with air flow and play an important role in the separation zone reduction. Additionally, readers will learn about the governing equation, boundary condition, high quality grid generation, high order shock capturing scheme and DNS inflow condition in detail. This volume will, therefore, serve as a useful reference for aerospace researchers using LES methods to study shock boundary layer interaction and supersonic flow control.
Publisher: Bentham Science Publishers
ISBN: 1681085976
Category : Technology & Engineering
Languages : en
Pages : 321
Book Description
This volume presents an implicitly implemented large eddy simulation (ILES) by using the fifth order bandwidth-optimized WENO scheme. The chosen method is applied to make comprehensive studies on ramp flows with and without control at Mach 2.5 and Re=5760. Flow control in the form of microramp vortex generators (MVG) is applied. The results show that a MVG can distinctly reduce the separation zone at the ramp corner and lower the boundary layer shape factor under simulated conditions. A series of new findings about the MVG-ramp flow are obtained, including structures relevant to surface pressure, three-dimensional structures of the re-compression shock waves, a complete surface separation pattern, momentum deficit and a new secondary vortex system. A new mechanism of shock-boundary layer interaction control by MVG associated with a series of vortex rings is also presented. Vortex rings strongly interact with air flow and play an important role in the separation zone reduction. Additionally, readers will learn about the governing equation, boundary condition, high quality grid generation, high order shock capturing scheme and DNS inflow condition in detail. This volume will, therefore, serve as a useful reference for aerospace researchers using LES methods to study shock boundary layer interaction and supersonic flow control.
Implicit Large Eddy Simulation
Author: Fernando F. Grinstein
Publisher: Cambridge University Press
ISBN: 9780521172721
Category : Technology & Engineering
Languages : en
Pages : 0
Book Description
The numerical simulation of turbulent flows is a subject of great practical importance to scientists and engineers. The difficulty in achieving predictive simulations is perhaps best illustrated by the wide range of approaches that have been developed and are still being used by the turbulence modeling community. In this book the authors describe one of these approaches, Implicit Large Eddy Simulation (ILES). ILES is a relatively new approach that combines generality and computational efficiency with documented success in many areas of complex fluid flow. This book synthesizes the theoretical basis of the ILES methodology and reviews its accomplishments. ILES pioneers and lead researchers combine here their experience to present a comprehensive description of the methodology. This book should be of fundamental interest to graduate students, basic research scientists, as well as professionals involved in the design and analysis of complex turbulent flows.
Publisher: Cambridge University Press
ISBN: 9780521172721
Category : Technology & Engineering
Languages : en
Pages : 0
Book Description
The numerical simulation of turbulent flows is a subject of great practical importance to scientists and engineers. The difficulty in achieving predictive simulations is perhaps best illustrated by the wide range of approaches that have been developed and are still being used by the turbulence modeling community. In this book the authors describe one of these approaches, Implicit Large Eddy Simulation (ILES). ILES is a relatively new approach that combines generality and computational efficiency with documented success in many areas of complex fluid flow. This book synthesizes the theoretical basis of the ILES methodology and reviews its accomplishments. ILES pioneers and lead researchers combine here their experience to present a comprehensive description of the methodology. This book should be of fundamental interest to graduate students, basic research scientists, as well as professionals involved in the design and analysis of complex turbulent flows.
Recent Advances in DNS and LES
Author: Doyle Knight
Publisher: Springer Science & Business Media
ISBN: 940114513X
Category : Technology & Engineering
Languages : en
Pages : 516
Book Description
This collection of papers presents a broad range of topics in DNS and LES, from new developments in LES modeling to DNS and LES for supersonic and hypersonic boundary layers. The book provides an extensive view of the state of the art in the field.
Publisher: Springer Science & Business Media
ISBN: 940114513X
Category : Technology & Engineering
Languages : en
Pages : 516
Book Description
This collection of papers presents a broad range of topics in DNS and LES, from new developments in LES modeling to DNS and LES for supersonic and hypersonic boundary layers. The book provides an extensive view of the state of the art in the field.
38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit: 02-4250 - 02-4299
Progress in Hybrid RANS-LES Modelling
Author: Song Fu
Publisher: Springer Science & Business Media
ISBN: 3642318185
Category : Technology & Engineering
Languages : en
Pages : 508
Book Description
The present book contains contributions presented at the Fourth Symposium on Hybrid RANS-LES Methods, held in Beijing, China, 28-30 September 2011, being a continuation of symposia taking place in Stockholm (Sweden, 2005), in Corfu (Greece, 2007), and Gdansk (Poland, 2009). The contributions to the last two symposia were published as NNFM, Vol. 97 and Vol. 111. At the Beijing symposium, along with seven invited keynotes, another 46 papers (plus 5 posters) were presented addressing topics on Novel turbulence-resolving simulation and modelling, Improved hybrid RANS-LES methods, Comparative studies of difference modelling methods, Modelling-related numerical issues and Industrial applications.. The present book reflects recent activities and new progress made in the development and applications of hybrid RANS-LES methods in general.
Publisher: Springer Science & Business Media
ISBN: 3642318185
Category : Technology & Engineering
Languages : en
Pages : 508
Book Description
The present book contains contributions presented at the Fourth Symposium on Hybrid RANS-LES Methods, held in Beijing, China, 28-30 September 2011, being a continuation of symposia taking place in Stockholm (Sweden, 2005), in Corfu (Greece, 2007), and Gdansk (Poland, 2009). The contributions to the last two symposia were published as NNFM, Vol. 97 and Vol. 111. At the Beijing symposium, along with seven invited keynotes, another 46 papers (plus 5 posters) were presented addressing topics on Novel turbulence-resolving simulation and modelling, Improved hybrid RANS-LES methods, Comparative studies of difference modelling methods, Modelling-related numerical issues and Industrial applications.. The present book reflects recent activities and new progress made in the development and applications of hybrid RANS-LES methods in general.
AIAA Journal
Author: American Institute of Aeronautics and Astronautics
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 990
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 990
Book Description
Unsteady Computational Fluid Dynamics in Aeronautics
Author: P.G. Tucker
Publisher: Springer Science & Business Media
ISBN: 9400770499
Category : Technology & Engineering
Languages : en
Pages : 432
Book Description
The field of Large Eddy Simulation (LES) and hybrids is a vibrant research area. This book runs through all the potential unsteady modelling fidelity ranges, from low-order to LES. The latter is probably the highest fidelity for practical aerospace systems modelling. Cutting edge new frontiers are defined. One example of a pressing environmental concern is noise. For the accurate prediction of this, unsteady modelling is needed. Hence computational aeroacoustics is explored. It is also emerging that there is a critical need for coupled simulations. Hence, this area is also considered and the tensions of utilizing such simulations with the already expensive LES. This work has relevance to the general field of CFD and LES and to a wide variety of non-aerospace aerodynamic systems (e.g. cars, submarines, ships, electronics, buildings). Topics treated include unsteady flow techniques; LES and hybrids; general numerical methods; computational aeroacoustics; computational aeroelasticity; coupled simulations and turbulence and its modelling (LES, RANS, transition, VLES, URANS). The volume concludes by pointing forward to future horizons and in particular the industrial use of LES. The writing style is accessible and useful to both academics and industrial practitioners. From the reviews: "Tucker's volume provides a very welcome, concise discussion of current capabilities for simulating and modellng unsteady aerodynamic flows. It covers the various pos sible numerical techniques in good, clear detail and presents a very wide range of practical applications; beautifully illustrated in many cases. This book thus provides a valuable text for practicing engineers, a rich source of background information for students and those new to this area of Research & Development, and an excellent state-of-the-art review for others. A great achievement." Mark Savill FHEA, FRAeS, C.Eng, Professor of Computational Aerodynamics Design & Head of Power & Propulsion Sciences, Department of Power & Propulsion, School of Engineering, Cranfield University, Bedfordshire, U.K. "This is a very useful book with a wide coverage of many aspects in unsteady aerodynamics method development and applications for internal and external flows." L. He, Rolls-Royce/RAEng Chair of Computational Aerothermal Engineering, Oxford University, U.K. "This comprehensive book ranges from classical concepts in both numerical methods and turbulence modelling approaches for the beginner to latest state-of-the-art for the advanced practitioner and constitutes an extremely valuable contribution to the specific Computational Fluid Dynamics literature in Aeronautics. Student and expert alike will benefit greatly by reading it from cover to cover." Sébastien Deck, Onera, Meudon, France
Publisher: Springer Science & Business Media
ISBN: 9400770499
Category : Technology & Engineering
Languages : en
Pages : 432
Book Description
The field of Large Eddy Simulation (LES) and hybrids is a vibrant research area. This book runs through all the potential unsteady modelling fidelity ranges, from low-order to LES. The latter is probably the highest fidelity for practical aerospace systems modelling. Cutting edge new frontiers are defined. One example of a pressing environmental concern is noise. For the accurate prediction of this, unsteady modelling is needed. Hence computational aeroacoustics is explored. It is also emerging that there is a critical need for coupled simulations. Hence, this area is also considered and the tensions of utilizing such simulations with the already expensive LES. This work has relevance to the general field of CFD and LES and to a wide variety of non-aerospace aerodynamic systems (e.g. cars, submarines, ships, electronics, buildings). Topics treated include unsteady flow techniques; LES and hybrids; general numerical methods; computational aeroacoustics; computational aeroelasticity; coupled simulations and turbulence and its modelling (LES, RANS, transition, VLES, URANS). The volume concludes by pointing forward to future horizons and in particular the industrial use of LES. The writing style is accessible and useful to both academics and industrial practitioners. From the reviews: "Tucker's volume provides a very welcome, concise discussion of current capabilities for simulating and modellng unsteady aerodynamic flows. It covers the various pos sible numerical techniques in good, clear detail and presents a very wide range of practical applications; beautifully illustrated in many cases. This book thus provides a valuable text for practicing engineers, a rich source of background information for students and those new to this area of Research & Development, and an excellent state-of-the-art review for others. A great achievement." Mark Savill FHEA, FRAeS, C.Eng, Professor of Computational Aerodynamics Design & Head of Power & Propulsion Sciences, Department of Power & Propulsion, School of Engineering, Cranfield University, Bedfordshire, U.K. "This is a very useful book with a wide coverage of many aspects in unsteady aerodynamics method development and applications for internal and external flows." L. He, Rolls-Royce/RAEng Chair of Computational Aerothermal Engineering, Oxford University, U.K. "This comprehensive book ranges from classical concepts in both numerical methods and turbulence modelling approaches for the beginner to latest state-of-the-art for the advanced practitioner and constitutes an extremely valuable contribution to the specific Computational Fluid Dynamics literature in Aeronautics. Student and expert alike will benefit greatly by reading it from cover to cover." Sébastien Deck, Onera, Meudon, France
Large-Eddy Simulations of Turbulence
Author: M. Lesieur
Publisher: Cambridge University Press
ISBN: 9780521781244
Category : Mathematics
Languages : en
Pages : 240
Book Description
Large-Eddy Simulations of Turbulence is a reference for LES, direct numerical simulation and Reynolds-averaged Navier-Stokes simulation.
Publisher: Cambridge University Press
ISBN: 9780521781244
Category : Mathematics
Languages : en
Pages : 240
Book Description
Large-Eddy Simulations of Turbulence is a reference for LES, direct numerical simulation and Reynolds-averaged Navier-Stokes simulation.
100 Volumes of 'Notes on Numerical Fluid Mechanics'
Author: Ernst Heinrich Hirschel
Publisher: Springer Science & Business Media
ISBN: 3540708057
Category : Technology & Engineering
Languages : en
Pages : 507
Book Description
In a book that will be required reading for engineers, physicists, and computer scientists, the editors have collated a number of articles on fluid mechanics, written by some of the world’s leading researchers and practitioners in this important subject area.
Publisher: Springer Science & Business Media
ISBN: 3540708057
Category : Technology & Engineering
Languages : en
Pages : 507
Book Description
In a book that will be required reading for engineers, physicists, and computer scientists, the editors have collated a number of articles on fluid mechanics, written by some of the world’s leading researchers and practitioners in this important subject area.
Computational Fluid Mechanics and Heat Transfer, Third Edition
Author: Richard H. Pletcher
Publisher: CRC Press
ISBN: 1591690374
Category : Science
Languages : en
Pages : 777
Book Description
Thoroughly updated to include the latest developments in the field, this classic text on finite-difference and finite-volume computational methods maintains the fundamental concepts covered in the first edition. As an introductory text for advanced undergraduates and first-year graduate students, Computational Fluid Mechanics and Heat Transfer, Third Edition provides the background necessary for solving complex problems in fluid mechanics and heat transfer. Divided into two parts, the book first lays the groundwork for the essential concepts preceding the fluids equations in the second part. It includes expanded coverage of turbulence and large-eddy simulation (LES) and additional material included on detached-eddy simulation (DES) and direct numerical simulation (DNS). Designed as a valuable resource for practitioners and students, new homework problems have been added to further enhance the student’s understanding of the fundamentals and applications.
Publisher: CRC Press
ISBN: 1591690374
Category : Science
Languages : en
Pages : 777
Book Description
Thoroughly updated to include the latest developments in the field, this classic text on finite-difference and finite-volume computational methods maintains the fundamental concepts covered in the first edition. As an introductory text for advanced undergraduates and first-year graduate students, Computational Fluid Mechanics and Heat Transfer, Third Edition provides the background necessary for solving complex problems in fluid mechanics and heat transfer. Divided into two parts, the book first lays the groundwork for the essential concepts preceding the fluids equations in the second part. It includes expanded coverage of turbulence and large-eddy simulation (LES) and additional material included on detached-eddy simulation (DES) and direct numerical simulation (DNS). Designed as a valuable resource for practitioners and students, new homework problems have been added to further enhance the student’s understanding of the fundamentals and applications.