Author: Publisher:
ISBN:
Category : Air
Languages : en
Pages : 540
Book Description
Journal of the Air & Waste Management Association
Author: Non-Exhaust Emissions
Author: Fulvio AmatoPublisher: Academic Press
ISBN: 0128117516
Category : Medical
Languages : en
Pages : 344
Book Description
Non-Exhaust Emissions: An Urban Air Quality Problem for Public Health comprehensively summarizes the most recent research in the field, also giving guidance on research gaps and future needs to evaluate the health impact and possible remediation of non-exhaust particle emissions. With contributions from some of the major experts and stakeholders in air quality, this book comprehensively defines the state-of-the-art of current knowledge, gaps and future needs for a better understanding of particulate matter (PM) emissions, from non-exhaust sources of road traffic to improve public health. PM is a heterogeneous mix of chemical elements and sources, with road traffic being the major source in large cities. A significant part of these emissions come from non-exhaust processes, such as brake, tire, road wear, and road dust resuspension. While motor exhaust emissions have been successfully reduced by means of regulation, non-exhaust emissions are currently uncontrolled and their importance is destined to increase and become the dominant urban source of particle matter by 2020. Nevertheless, current knowledge on the non-exhaust emissions is still limited. This is an essential book to researchers and advanced students from a broad range of disciplines, such as public health, toxicology, atmospheric sciences, environmental sciences, atmospheric chemistry and physics, geochemistry, epidemiology, built environment, road and vehicle engineering, and city planning. In addition, European and local authorities responsible for air quality and those in the industrial sectors related to vehicle and brake manufacturing and technological remediation measures will also find the book valuable. - Acts as the first book to explore the health impacts of non-exhaust emissions - Authored by experts from several sectors, including academia, industry and policy - Gathers the relevant body of literature and information, defining the current knowledge, gaps and future needs
Scientific and Technical Aerospace Reports
Author: Annual Index/abstracts of SAE Technical Papers
Author: Diesel Engine Transient Operation
Author: Constantine D. RakopoulosPublisher: Springer Science & Business Media
ISBN: 1848823754
Category : Technology & Engineering
Languages : en
Pages : 408
Book Description
Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.
Non-exhaust Particulate Emissions from Road Transport An Ignored Environmental Policy Challenge
Author: OECDPublisher: OECD Publishing
ISBN: 9264888853
Category :
Languages : en
Pages : 149
Book Description
Non-exhaust emissions of particulate matter constitute a little-known but rising share of emissions from road traffic and have significant negative impacts on public health. This report synthesizes the current state of knowledge about the nature, causes, and consequences of non-exhaust particulate emissions. It also projects how particulate matter emissions from non-exhaust sources may evolve in future years and reflects on policy instrument mixes that can address this largely ignored environmental issue.
Airborne Particles
Author: National Research Council (U.S.). Subcommittee on Airborne ParticlesPublisher:
ISBN:
Category : Science
Languages : en
Pages : 376
Book Description
The Ongoing Challenge of Managing Carbon Monoxide Pollution in Fairbanks, Alaska
Author: National Research CouncilPublisher: National Academies Press
ISBN: 0309182751
Category : Nature
Languages : en
Pages : 158
Book Description
Carbon monoxide (CO) is a toxic air pollutant produced largely from vehicle emissions. Breathing CO at high concentrations leads to reduced oxygen transport by hemoglobin, which has health effects that include impaired reaction timing, headaches, lightheadedness, nausea, vomiting, weakness, clouding of consciousness, coma, and, at high enough concentrations and long enough exposure, death. In recognition of those health effects, the U.S. Environmental Protection Agency (EPA), as directed by the Clean Air Act, established the health-based National Ambient Air Quality Standards (NAAQS) for CO in 1971. Most areas that were previously designated as "nonattainment" areas have come into compliance with the NAAQS for CO, but some locations still have difficulty in attaining the CO standards. Those locations tend to have topographical or meteorological characteristics that exacerbate pollution. In view of the challenges posed for some areas to attain compliance with the NAAQS for CO, congress asked the National Research Council to investigate the problem of CO in areas with meteorological and topographical problems. This interim report deals specifically with Fairbanks, Alaska. Fairbanks was chosen as a case study because its meteorological and topographical characteristics make it susceptible to severe winter inversions that trap CO and other pollutants at ground level.
WHO global air quality guidelines
Author: WeltgesundheitsorganisationPublisher: World Health Organization
ISBN: 9240034226
Category : Nature
Languages : en
Pages : 300
Book Description
The main objective of these updated global guidelines is to offer health-based air quality guideline levels, expressed as long-term or short-term concentrations for six key air pollutants: PM2.5, PM10, ozone, nitrogen dioxide, sulfur dioxide and carbon monoxide. In addition, the guidelines provide interim targets to guide reduction efforts of these pollutants, as well as good practice statements for the management of certain types of PM (i.e., black carbon/elemental carbon, ultrafine particles, particles originating from sand and duststorms). These guidelines are not legally binding standards; however, they provide WHO Member States with an evidence-informed tool, which they can use to inform legislation and policy. Ultimately, the goal of these guidelines is to help reduce levels of air pollutants in order to decrease the enormous health burden resulting from the exposure to air pollution worldwide.
Emission estimation based on traffic models and measurements
Author: Nikolaos TsanakasPublisher: Linköping University Electronic Press
ISBN: 9176850927
Category :
Languages : en
Pages : 143
Book Description
Traffic congestion increases travel times, but also results in higher energy usage and vehicular emissions. To evaluate the impact of traffic emissions on environment and human health, the accurate estimation of their rates and location is required. Traffic emission models can be used for estimating emissions, providing emission factors in grams per vehicle and kilometre. Emission factors are defined for specific traffic situations, and traffic data is necessary in order to determine these traffic situations along a traffic network. The required traffic data, which consists of average speed and flow, can be obtained either from traffic models or sensor measurements. In large urban areas, the collection of cross-sectional data from stationary sensors is a costefficient method of deriving traffic data for emission modelling. However, the traditional approaches of extrapolating this data in time and space may not accurately capture the variations of the traffic variables when congestion is high, affecting the emission estimation. Static transportation planning models, commonly used for the evaluation of infrastructure investments and policy changes, constitute an alternative efficient method of estimating the traffic data. Nevertheless, their static nature may result in an inaccurate estimation of dynamic traffic variables, such as the location of congestion, having a direct impact on emission estimation. Congestion is strongly correlated with increased emission rates, and since emissions have location specific effects, the location of congestion becomes a crucial aspect. Therefore, the derivation of traffic data for emission modelling usually relies on the simplified, traditional approaches. The aim of this thesis is to identify, quantify and finally reduce the potential errors that these traditional approaches introduce in an emission estimation analysis. According to our main findings, traditional approaches may be sufficient for analysing pollutants with global effects such as CO2, or for large-scale emission modelling applications such as emission inventories. However, for more temporally and spatially sensitive applications, such as dispersion and exposure modelling, a more detailed approach is needed. In case of cross-sectional measurements, we suggest and evaluate the use of a more detailed, but computationally more expensive, data extrapolation approach. Additionally, considering the inabilities of static models, we propose and evaluate the post-processing of their results, by applying quasi-dynamic network loading.