Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Metallization of Polymers 2 PDF full book. Access full book title Metallization of Polymers 2 by Edward Sacher. Download full books in PDF and EPUB format.
Author: Edward Sacher Publisher: Springer Science & Business Media ISBN: 1461505631 Category : Science Languages : en Pages : 208
Book Description
As the demands put on the polymer/metal interface, particularly by the microelectronics industry, become more and more severe, the necessity for understanding this interface, its properties and its limitations, becomes more and more essential. This requires a broad knowledge of, and a familiarity with, the latest findings in this rapidly advancing field. At the very least, such familiarity requires an exchange of infonnation, particularly among those intimately involved in this field. Communications among many of us in this area have made one fact quite obvious: the facilities provided by existing organizations, scientific and otherwise, do not offer the forum necessary to accomplish this exchange of infonnation. It was for this reason that Jean-Jacques Pireaux, Steven Kowalczyk and I organized the first Metallization of Polymers, a symposium sponsored by the American Chemical Society, which took place in Montreal, September 25-28, 1989; the Proceedings from that symposium were published as ACS Symposium Series 440, (1990). It is this same per ceived lack of a proper forum, and the encouragement of my colleagues, that prompted me to organize this meeting, so as to bring to the attention of the participants new instruments, materials, methods, advances, and, particularly, thoughts in the field of polymer metalliza tion. The meeting was designed as a workshop, with time being made available throughout for discussion and for the consideration of new findings.
Author: Edward Sacher Publisher: Springer Science & Business Media ISBN: 1461505631 Category : Science Languages : en Pages : 208
Book Description
As the demands put on the polymer/metal interface, particularly by the microelectronics industry, become more and more severe, the necessity for understanding this interface, its properties and its limitations, becomes more and more essential. This requires a broad knowledge of, and a familiarity with, the latest findings in this rapidly advancing field. At the very least, such familiarity requires an exchange of infonnation, particularly among those intimately involved in this field. Communications among many of us in this area have made one fact quite obvious: the facilities provided by existing organizations, scientific and otherwise, do not offer the forum necessary to accomplish this exchange of infonnation. It was for this reason that Jean-Jacques Pireaux, Steven Kowalczyk and I organized the first Metallization of Polymers, a symposium sponsored by the American Chemical Society, which took place in Montreal, September 25-28, 1989; the Proceedings from that symposium were published as ACS Symposium Series 440, (1990). It is this same per ceived lack of a proper forum, and the encouragement of my colleagues, that prompted me to organize this meeting, so as to bring to the attention of the participants new instruments, materials, methods, advances, and, particularly, thoughts in the field of polymer metalliza tion. The meeting was designed as a workshop, with time being made available throughout for discussion and for the consideration of new findings.
Author: Kash L. Mittal Publisher: CRC Press ISBN: 9047420985 Category : Science Languages : en Pages : 435
Book Description
This book is mostly based on papers presented at the Fourth International Symposium on this topic held in Savannah, Georgia. However, in addition to these papers, certain very relevant papers have also been included to broaden the scope and thus enhance the value of this book.Currently there is tremendous interest in these material because of their
Author: K. L. Mittal Publisher: VSP ISBN: 9789067643788 Category : Technology & Engineering Languages : en Pages : 554
Book Description
Annotation Containing 32 peer-reviewed papers, this volume documents the proceedings of the international symposium of the same name (held under the aegis of the Materials Science and Technology Conferences) in December of 2001. Devoted to research into high-temperature polymers, the papers are organized into sections dealing with synthesis, properties, and bulk characterization in the first half and surface modification, interfacial or adhesion aspects, and applications in the second. Annotation (c)2003 Book News, Inc., Portland, OR (booknews.com).
Author: Laurence S. Romsted Publisher: CRC Press ISBN: 1439882967 Category : Science Languages : en Pages : 580
Book Description
Surfactant research explores the forces responsible for surfactant assembly and the critical industrial, medical, and personal applications, including viscosity control, microelectronics, drug stabilization, drug delivery, cosmetics, enhanced oil recovery, and foods. Surfactant Science and Technology: Retrospects and Prospects, "a Festschrift in ho
Author: Jörg Florian Friedrich Publisher: John Wiley & Sons ISBN: 352767991X Category : Technology & Engineering Languages : en Pages : 575
Book Description
The result of decades of research by a pioneer in the field, this is the first book to deal exclusively with achieving high-performance metal-polymer composites by chemical bonding. Covering both the academic and practical aspects, the author focuses on the chemistry of interfaces between metals and polymers with a particular emphasis on the chemical bonding between the different materials. He elucidates the various approaches to obtaining a stable interface, including, but not limited to, thermodynamically driven redox reactions, bond protection to prevent hydrolysis, the introduction of barrier layers, and stabilization by spacer molecules. Throughout, chemical bonding is promoted as a simple and economically viable alternative to adhesion based on reversible weak physical interaction. Consequently, the text equips readers with the practical tools necessary for designing high-strength metal-polymer composites with such desired properties as resilience, flexibility, rigidity or degradation resistance.
Author: K.L. Mittal Publisher: CRC Press ISBN: 9780824799250 Category : Technology & Engineering Languages : en Pages : 400
Book Description
"Integrates the latest findings on metallized plastics and their far-reaching applications by more than 80 recognized experts from North America, Europe, the Middle East, and Asia. Addresses both basic and applied aspects of the subject."
Author: Kash L. Mittal Publisher: CRC Press ISBN: 146656220X Category : Science Languages : en Pages : 637
Book Description
This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.
Author: Jörg Florian Friedrich Publisher: John Wiley & Sons ISBN: 352764802X Category : Technology & Engineering Languages : en Pages : 479
Book Description
More than 99% of all visible matter in the universe occurs as highly ionized gas plasma with high energy content. Electrical low- and atmospheric-pressure plasmas are characterized by continuous source of moderate quantities of energy or enthalpy transferred predominantly as kinetic energy of electrons. Therefore, such energetically unbalanced plasmas have low gas temperature but produce sufficient energy for inelastic collisions with atoms and molecules in the gas phase, thus producing reactive species and photons, which are able to initiate all types of polymerizations or activate any surface of low reactive polymers. However, the broadly distributed energies in the plasma exceed partially the binding energies in polymers, thus initiating very often unselective reactions and polymer degradation. The intention of this book is to present new plasma processes and new plasma reactions of high selectivity and high yield. This book aims to bridge classical and plasma chemistry, particularly focusing on polymer chemistry in the bulk and on the surface under plasma exposure. The stability of surface functionalization and the qualitative and quantitative measurement of functional groups at polymer surface are featured prominently, and chemical pathways for suppressing the undesirable side effects of plasma exposure are proposed and illustrated with numerous examples. Special attention is paid to the smooth transition from inanimate polymer surfaces to modified bioactive polymer surfaces. A wide range of techniques, plasma types and applications are demonstrated.
Author: Kash L. Mittal Publisher: CRC Press ISBN: 9067644226 Category : Technology & Engineering Languages : en Pages : 582
Book Description
This volume chronicles the proceedings of the Third International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization, and Applications, held in Orlando, December 17-19, 2003. This volume is divided into three parts. Part 1. “Synthesis, Properties and Bulk Characterization”; Part 2 “Hybrids and Composites” and Part 3 “Applications and General Papers”. The topics covered include: Synthesis, characterization and processing (including some novel approaches) of a variety of polyimides and other high temperature polymers; structure-property relationships; hybrids and nanocomposites using these materials and their characterization, properties and applications; segmental dynamics in polyimide materials; photoalignable polyimides; photoconductivity and photosensitivity of polyimides; ultrafiltration membranes from polyetherimide; polyimide as a tunneling barrier; polymer materials for nonlinear optical applications; alignment of SWNTs in rigid-rod polymer compositions; surface modification of polyimide; adhesion of Cu to polyimide surfaces; and polyimide erosion in a low Earth orbit space environment.
Author: K.L. Mittal Publisher: Springer Science & Business Media ISBN: 1489923675 Category : Science Languages : en Pages : 319
Book Description
This volume chronicles the proceedings of the Third Symposium on Particles on Surfaces : Detection, Adhesion and Removal held as a part of the 21st Annual Meeting of the Fine Particle Society in San Diego , California, August 21 - 25 , 1990 . The first two symposia i n t h i s series were held in 1986 and 1988 , respectively, and have been properly l documented ,2. Li ke its antecedent s the Third symposium was very well received, and the continuing success of these symposia reinforced our earlier belief that regular symposia on the topic of particles on surfaces were very much needed. Concomitantly, the fourth symposium in this series is planned in Las Vegas , July 13-17 , 199 2 . l As pointed out in the Preface to the earlier two volumes ,2, the topic of particles on surfaces is of tremendous interest and concern in a wide spectrum of technological areas . The objectives of the Third symposium were es s ent i a l ly the same as those of the earlier two and our intent her e was to provide an update on the research and development activities in the world of particles on surfaces . Apropos , there has been a deliberate attempt every time to s eek out new people to present their research results and we have been very succes s f ul in this mission.
Author: Edward Sacher
Author: Edward Sacher
Author: Kash L. Mittal
Author: K. L. Mittal
Author: Laurence S. Romsted
Author: Jörg Florian Friedrich
Author: K.L. Mittal
Author: Kash L. Mittal
Author: Jörg Florian Friedrich
Author: Kash L. Mittal
Author: K.L. Mittal