Material Properties of Cold In-place Recycled and Full-depth Reclamation Asphalt Concrete PDF Download

Author: Charles Warren Schwartz
Publisher:
ISBN: 9780309446716
Category : Pavements, Asphalt concrete
Languages : en
Pages : 74

View

Book Description

Author: Jon A. Epps
Publisher: Transportation Research Board
ISBN: 9780309049115
Category : Technology & Engineering
Languages : en
Pages : 116

View

Book Description
This synthesis will be of interest to pavement designers, construction engineers, and others interested in economical methods for reconstructing or rehabilitating bituminous pavements. Information is provided on the processes and procedures used by a number of states to recycle asphalt pavements in place without application of heat. Since 1975 a growing number of state highway agencies have reconstructed or rehabilitated asphalt pavements by recycling the old pavement in place. This report of the Transportation Research Board describes the processes used for cold in-place recycling, including construction procedures, mix designs, mixture properties, performance, and specifications.

Author: Mary Stroup-Gardiner
Publisher: Transportation Research Board National Research
ISBN: 9780309143448
Category : Pavements, Asphalt
Languages : en
Pages : 70

View

Book Description
TRB’s National Cooperative Highway Research Program (NCHRP) Synthesis 421: Recycling and Reclamation of Asphalt Pavements Using In-Place Methods discusses the use of hot in-place recycling, cold in-place recycling, and full-depth reclamation of asphalt pavements.

Author: Asphalt Institute
Publisher:
ISBN: 9781934154090
Category : Aggregates (Building materials)
Languages : en
Pages : 185

View

Book Description

Author: Paulo Pereira
Publisher: Springer Nature
ISBN: 3031635841
Category :
Languages : en
Pages : 666

View

Book Description

Author: Asphalt Institute
Publisher:
ISBN: 9781934154175
Category : Asphalt
Languages : en
Pages : 102

View

Book Description

Author: Sadie Casillas
Publisher:
ISBN:
Category :
Languages : en
Pages : 388

View

Book Description
To maximize the life and quality of a pavement, proper maintenance and rehabilitation are essential. Strategies for pavement rehabilitation with many sustainable benefits are pavement recycling. This dissertation focuses on two types of in-situ pavement recycling: Cold in-place recycling (CIR) stabilized with asphalt emulsion and full depth reclamation (FDR) stabilized with asphalt emulsion or foamed asphalt. One white paper (Chapter 2), two accepted peer reviewed journal articles (Chapters 3 and 4), and one submitted peer reviewed journal article (Chapter 5) are presented in this document to create better understanding of the unique material characterization of asphalt emulsion cold recycled materials, along with factors which influence characterization, pertaining to the measurement of workability, compactability, and cohesion gain. In Chapter 2, a detailed review of the progression of mix design procedures for unbound granular materials (UGM), fully bound hot mix asphalt (HMA), and semi-bound asphalt emulsion CIR is presented to establish the current state of mix design for each material type and identify ways the design of asphalt emulsion CIR could become more engineered rather than empirical. Recommendations included development of additional guidance on use of active and inert fillers, a methodology to account for workability and compactability during mix design, curing procedures which more closely mimic conditions in the field to improve cohesion gain, and a procedure for determination of optimum water content. In Chapter 3, a study was conducted to evaluate different laboratory compaction methods for compaction of asphalt emulsion and foamed asphalt FDR. Both the Proctor hammer, typically used for UGM, and the Superpave Gyratory Compactor (SGC), typically used for HMA, were compared by evaluating densities, tensile strengths, and compaction metrics of FDR samples produced using each method. The modified Proctor hammer produced samples with the highest dry unit weights; however, samples produced using the SGC had higher tensile strengths, indicating compaction method affects material properties. Chapter 4 evaluates different test methods and equipment commonly available in asphalt laboratories for ability to quantify workability, compactability, and cohesion gain of asphalt emulsion CIR by measuring differences in performance due to changes in laboratory curing conditions. Cure temperature was found to have a more significant influence on test results than cure time. SGC metrics were recommended for quantifying workability and compactability. The direct shear test showed promise for quantifying cohesion gain. Finally, Chapter 5 measured effects of various sample fabrication factors on measurement of workability, compactability, and cohesion gain in order to address open questions associated with asphalt emulsion CIR laboratory procedures. Curing temperature most significantly influenced workability and compactability; while cohesion gain was more significantly influenced by mixing temperature and specimen test temperature. The direct shear test again showed promise for measuring cohesion gain of asphalt emulsion CIR. Therefore, a draft specification for this test method was prepared and is included as an appendix of this dissertation. A singular test method for quantifying workability and compactability for asphalt emulsion CIR has not yet been identified due to multiple mechanisms at play during mixing and compaction stages for this material.

Author: J. Paul Guyer
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 32

View

Book Description
Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in cold recycling of asphalt concrete pavement. Here is what is discussed: 1. INTRODUCTION, 2. BACKGROUND, 3. INITIAL PROJECT SELECTION CRITERIA, 4. TRAFFIC, 5. STRUCTURAL ASSESSMENT, 6. OVERLAY THICKNESS DESIGN, 7. INITIAL STRUCTURAL SUPPORT, 8. PROJECT LENGTH, 9. CURING, 10. UTILITIES, 11. SURFACE TREATMENTS, 12. PAVING FABRICS, GEOSYNTHETICS AND CRACK SEAL, 13. PATCHES, 14. FINAL PROJECT SELECTION, 15. ECONOMIC ASSESSMENT, 16. SUMMARY, 17. SIGNIFICANT IN-PLACE RECYCLING RESOURCES, 18. REFERENCES.

Author: Todd V. Scholz
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 58

View

Book Description

Author: Marco Pasetto
Publisher: Springer Nature
ISBN: 3030297799
Category : Science
Languages : en
Pages : 503

View

Book Description
This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.