Author: Carmen K. S. ChanPublisher:
ISBN:
Category :
Languages : en
Pages : 166
Book Description
Thermodynamic Modelling of a Lean Burn Natural Gas Engine
Author: Carmen K. S. ChanLean Burn Natural Gas Spark Ignition Engine
Author: Publisher:
ISBN:
Category : Internal combustion engines
Languages : en
Pages : 14
Book Description
Lean Burn Natural Gas Engine R & D.
Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The primary objective of this cooperative research is to develop and verify models of internal combustion engine spark ignition devices in order to improve combustion chamber fuel ignition characteristics and to improve spark plug durability. As a direct result of this joint research, a novel spark plug design was improved. A theory of spark arc motion was developed that explains experimentally observed effects not explained by other published theories. The knowledge developed by this research will be used to further improve spark plugs as well as improve the ignition process in a combustion chamber. The predictive models developed here are compared with experimental measurements, including high-speed photographs, of the spark as it translates across the gap. Two different spark plug configurations were investigated: the conventional or J-gap plug, and a novel spark ignition device (the FANG plug) invented by Cummins, Inc., the CRADA partner. A description of the physics of arc dynamic motion in a spark plug gap, including the effects of an imposed transverse magnetic field, appears here in Appendix A as a result of the analytical effort. The theory proposed here does explain experimentally observed effects not completely explained by other research publications appearing in the scientific literature. These effects are due to pressure and ion, electron, and electrode interactions. A dominant mechanism for electrode erosion is presented for both spark plug configurations. Reversing the polarity of both types of spark plugs has verified this proposed erosion mechanism, according to data collected at Cummins. An extensive series of experiments measured the arc position, voltage, and current as a function of time during the approximately 2 millisecond spark discharge. FANG plug data, obtained with the fast-framing camera experimental apparatus operating at 200,000 frames per second, are presented that show the transverse arc velocity varying directly as the inverse square root of the elapsed time since arc initiation. At the request of Cummins, experiments were performed on three conventional spark plugs identical in design and having the same spark gap, but differing as follows: one was new, another had been used in an engine, and the third was new but had been sandblasted to simulate a used plug. Cummins had observed that only the used plug required a significantly higher breakdown voltage. Experiments at ORNL indicated that the used plug had a significantly higher breakdown voltage confirming the Cummins observations (although the sandblasted plug also exhibited a higher breakdown voltage than the new plug but lower than the used plug), and thus an apparent increase of the arc breakdown voltage results as the plug ages in use. Further analysis of this phenomenon is warranted.
Lean Combustion
Author: Derek Dunn-RankinPublisher: Academic Press
ISBN: 0080550525
Category : Technology & Engineering
Languages : en
Pages : 282
Book Description
Combustion under sufficiently fuel-lean conditions can have the desirable attributes of high efficiency and low emissions, this being particularly important in light of recent and rapid increases in the cost of fossil fuels and concerns over the links between combustion and global climate change. Lean Combustion is an eminently authoritative, reference work on the latest advances in lean combustion technology and systems. It will offer engineers working on combustion equipment and systems both the fundamentals and the latest developments in more efficient fuel usage and in much-sought-after reductions of undesirable emissions, while still achieving desired power output and performance. This volume brings together research and design of lean combustion systems across the technology spectrum in order to explore the state-of-the-art in lean combustion and its role in meeting current and future demands on combustion systems. Readers will learn about advances in the understanding of ultra lean fuel mixtures and how new types of burners and approaches to managing heat flow can reduce problems often found with lean combustion such as slow, difficult ignition and frequent flame extinction. The book will also offer abundant references and examples of recent real-world applications. Covers all major recent developments in lean combustion science and technology, with new applications in both traditional combustion schemes as well as such novel uses as highly preheated and hydrogen-fueled systems Offers techniques for overcoming difficult ignition problems and flame extinction with lean fuel mixtures Covers new developments in lean combustion using high levels of pre-heat and heat re-circulating burners, as well as the active control of lean combustion instabilities
Exhaust Gas Recirculation in a Lean-burn Natural Gas Engine
Author: Sumit BhargavaPublisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 132
Book Description
Lean Burn Natural Gas Fueled Engines
Author: Mirza Jamil YusufPublisher:
ISBN:
Category : Hydrogen as fuel
Languages : en
Pages : 256
Book Description
Detection, Analysis, and Control of Knock in a Natural Gas, Lean Burn Engine
Author: Timo E. LatvakoskiPublisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 236
Book Description
Lean NOx Trap Catalysis for Lean Burn Natural Gas Engines
Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
As the nation's demand for energy grows along with concern for the environment, there is a pressing need for cleaner, more efficient forms of energy. The internal combustion engine is well established as one of the most reliable forms of power production. They are commercially available in power ranges from 0.5 kW to 6.5 MW, which make them suitable for a wide range of distributed power applications from small scale residential to large scale industrial. In addition, alternative fuels with domestic abundance, such as natural gas, can play a key role in weaning our nations dependence on foreign oil. Lean burn natural gas engines can achieve high efficiencies and can be conveniently placed anywhere natural gas supplies are available. However, the aftertreatment of Nox emissions presents a challenge in lean exhaust conditions. Unlike carbon monoxide and hydrocarbons, which can be catalytically reduced in lean exhaust, NOx emissions require a net reducing atmosphere for catalytic reduction. Unless this challenge of NOx reduction can be met, emissions regulations may restrict the implementation of highly efficient lean burn natural gas engines for stationary power applications. While the typical three-way catalyst is ineffective for NOx reduction under lean exhaust conditions, several emerging catalyst technologies have demonstrated potential. The three leading contenders for lean burn engine de-NOx are the Lean NOx Catalyst (LNC), Selective Catalytic Reduction (SCR) and the Lean Nox Trap (LNT). Similar to the principles of SCR, an LNT catalyst has the ability to store NOx under lean engine operation. Then, an intermittent rich condition is created causing the stored NOx to be released and subsequently reduced. However, unlike SCR, which uses urea injection to create the reducing atmosphere, the LNT can use the same fuel supplied to the engine as the reductant. LNT technology has demonstrated high reduction efficiencies in diesel applications where diesel fuel is the reducing agent. The premise of this research is to explore the application of Lean NOx Trap technology to a lean burn natural gas engine where natural gas is the reducing agent. Natural gas is primarily composed of methane, a highly stable hydrocarbon. The two primary challenges addressed by this research are the performance of the LNT in the temperature ranges experienced from lean natural gas combustion and the utilization of the highly stable methane as the reducing agent. The project used an 8.3 liter lean burn natural gas engine on a dynamometer to generate the lean exhaust conditions. The catalysts were packaged in a dual path aftertreatment system, and a set of valves were used to control the flow of exhaust to either leg during adsorption and regeneration.
Performance of a Lean-burn Natural Gas Engine Using a Double-pulse Partially-stratified Charge Ignition System
Author: Arminta S. ChickaEffect of Fuel Composition on the Operation of a Lean Burn Natural Gas Engine
Author: Nigel N. ClarkPublisher:
ISBN:
Category : Automobiles
Languages : en
Pages :
Book Description