Kenexis Fire and Gas Systems Engineering Handbook PDF Download

Author: Kevin Mitchell
Publisher:
ISBN: 9781492765370
Category :
Languages : en
Pages : 202

View

Book Description
Provides a practical discussion of performance-based FGS design

Author: Austin Bryan
Publisher:
ISBN: 9781941546451
Category :
Languages : en
Pages : 186

View

Book Description
With the release of the ISA-TR84.00.07 technical report on performance-based design of fire and gas detection systems for process industries, risk-based techniques for detector placement have become prevalent in fire and gas system (FGS) design. While the technical report addresses designing the FGS based on the user's risk profile and performance requirements, it does not provide any guidance on implementing the FGS lifecycle. This handbook provides a thorough overview of the FGS design lifecycle presented in the technical report, with an examination of each phase of the lifecycle and the practical activities required to develop an FGS design. In addition to discussing the design process, this handbook also provides valuable appendices that contain data for FGS system risk analysis, FGS risk grading procedures, and a discussion of the FGS mapping techniques used to verify the achievement of the newly defined coverage targets.

Author: Karan Sotoodeh
Publisher: CRC Press
ISBN: 1000895467
Category : Technology & Engineering
Languages : en
Pages : 469

View

Book Description
When accidents occur in the oil and gas industry, the impacts can be profound. Serious injury or death to workers, environmental disasters and colossal costs for insurance or clean ups make the industry a hazardous one to operate in. Disasters become major news events such as the Prestige oil spill, Piper Alpha, Exxon Valdez oil spill and Deepwater Horizon. A move towards improving the health and safety of the industry is underway. This book emphasizes controlling, managing, and mitigating the risk of hazards in the oil and gas industry, increasing safety, and protecting the environment by identifying the hazards in the oil and gas industry through safety engineering techniques and management methods. Safety Engineering in the Oil and Gas Industry discusses how to improve safety and reliability in the oil and gas industry so that hazards can be reduced to the lowest level feasible. It covers the techniques needed to operate safely in an oil and/or gas industry setting, the standards that should be adhered to, the impacts of PPE, fire and explosions, equipment and infrastructure failures and storage and reliability engineering, amongst many other topics. This book is written in an easy-to-read and appealing style and multiple-choice questions are included to help with learning and understanding the concepts included. Underpinned by real life case studies and examples, this book aims to allow readers to consider how they can reduce the costs associated with bad safety practices to their business through maintained and consistent health, safety and environmental (HSE) standards. This book is a must-read for any student or professional studying or working in the oil and gas industries. It also has additional appeal to those with an academic or professional interest in occupational health and safety, civil engineering, offshore engineering and maritime engineering.

Author: Dennis P. Nolan
Publisher: William Andrew
ISBN: 0815517521
Category : Technology & Engineering
Languages : en
Pages : 312

View

Book Description
The security and economic stability of many nations and multinational oil companies are highly dependent on the safe and uninterrupted operation of their oil, gas and chemical facilities. One of the most critical impacts that can occur to these operations are fires and explosions from accidental or political incidents. This publication is intended as a general engineering handbook and reference guideline for those personnel involved with fire and explosion protection aspects of critical hydrocarbon facilities. Design guidelines and specifications of major, small and independent oil companies as well as information from engineering firms and published industry references have been reviewed to assist in its preparation. Some of the latest published practices and research into fire and explosions have also been mentioned.

Author: Karan Sotoodeh
Publisher: CRC Press
ISBN: 1040011527
Category : Technology & Engineering
Languages : en
Pages : 294

View

Book Description
Equipment and Components in the Oil and Gas Industry Volume 1: Equipment provides an overview of the equipment used in the oil and gas industry, as well as various stages of the oil and gas industry, including geology, exploration, drilling, transportation, and refining. Using practical industry examples and an accessible approach, the book is a key reference point for those seeking to learn more about the industry. The equipment used in the oil and gas industry is wide ranging, from drilling equipment and wellhead equipment, such as casings, tubing, and wellhead Christmas trees, to equipment for the transportation of fluids and gases, such as pumps and compressors. The book presents a simplified method to choose the correct equipment for each task, as well as covering the selection of heat exchangers and storage tanks. Finally, this book covers turbines, motors, and other prime movers, alongside a flare system for disposing of unwanted or waste gases in oil and gas refineries and petrochemical plants. This book will be of interest to mechanical and chemical engineers working in the oil and gas industry.

Author: Karan Sotoodeh
Publisher: CRC Press
ISBN: 1040012515
Category : Technology & Engineering
Languages : en
Pages : 280

View

Book Description
Equipment and Components in the Oil and Gas Industry Volume 2: Components provides an overview of the components used in the oil and gas industry, including instrumentation, pipe components, and safety components. Using practical industry examples and an accessible approach, the book is a key reference point for those seeking to learn more about the industry. Covering both larger and smaller components used throughout the oil and gas industry, the book details the theory behind pressure gauges, temperature gauges, flow gauges, and level gauges. It then goes on to discuss piping components, such as pipes, flanges, and gaskets and introduces piping special components. Valves are particularly crucial to the oil and gas industry, including on/off valves, control valves, safety valves, and special valves. The book also details actuators, sprinklers, fire and gas detectors, hoses, and hose reels, along with electrical components such as switches, cables, wires, and cable glands. Finally, the book ends with a discussion of heating, ventilation, and air conditioning (HVAC) components. This book will be of interest to mechanical and chemical engineers working in the oil and gas industry.

Author: Dennis P. Nolan
Publisher: William Andrew
ISBN: 9780815513940
Category : Technology & Engineering
Languages : en
Pages : 291

View

Book Description
The security and economic stability of many nations and multinational oil companies are highly dependent on the safe and uninterrupted operation of their oil, gas and chemical facilities. One of the most critical impacts that can occur to these operations are fires and explosions from accidental or political incidents. This publication is intended as a general engineering handbook and reference guideline for those personnel involved with fire and explosion protection aspects of critical hydrocarbon facilities. Design guidelines and specifications of major, small and independent oil companies as well as information from engineering firms and published industry references have been reviewed to assist in its preparation. Some of the latest published practices and research into fire and explosions have also been mentioned.

Author: Swapan Basu
Publisher: Academic Press
ISBN: 0128038217
Category : Technology & Engineering
Languages : en
Pages : 1064

View

Book Description
Plant Hazard Analysis and Safety Instrumentation Systems is the first book to combine coverage of these two integral aspects of running a chemical processing plant. It helps engineers from various disciplines learn how various analysis techniques, international standards, and instrumentation and controls provide layers of protection for basic process control systems, and how, as a result, overall system reliability, availability, dependability, and maintainability can be increased. This step-by-step guide takes readers through the development of safety instrumented systems, also including discussions on cost impact, basics of statistics, and reliability. Swapan Basu brings more than 35 years of industrial experience to this book, using practical examples to demonstrate concepts. Basu links between the SIS requirements and process hazard analysis in order to complete SIS lifecycle implementation and covers safety analysis and realization in control systems, with up-to-date descriptions of modern concepts, such as SIL, SIS, and Fault Tolerance to name a few. In addition, the book addresses security issues that are particularly important for the programmable systems in modern plants, and discusses, at length, hazardous atmospheres and their impact on electrical enclosures and the use of IS circuits. Helps the reader identify which hazard analysis method is the most appropriate (covers ALARP, HAZOP, FMEA, LOPA) Provides tactics on how to implement standards, such as IEC 61508/61511 and ANSI/ISA 84 Presents information on how to conduct safety analysis and realization in control systems and safety instrumentation

Author: James McNay
Publisher: CRC Press
ISBN: 1000629600
Category : Technology & Engineering
Languages : en
Pages : 153

View

Book Description
In the last 15 years, the field of fire and gas mapping has grown extensively, yet very little is published on the subject. The text includes deeper discussions on important engineering factors associated with fire and gas detection, along with anecdotes and examples. It will guide the readers on what to consider when you do not have access to proprietary guides, and how to interpret the design process even when one does not have access to a guidance document. The text covers important topics including visual flame detection, flame detection mapping, infrared point gas detector (IRPGD), infrared open path gas detector (OPGD), ultrasonic/acoustic design, and gas detection mapping. The book plays the following roles: Explores practical aspects of designing a detection layout Enables users in interpreting a detector data sheet and coverage analysis Teaches readers working on a project to cut through the marketing of detection and design an effective system Inclusion of real-life experiences on projects will provide engineers with clear examples of where things can, and often do, go wrong It is an ideal text for professionals and graduate students working in the fields of occupational health and safety, fire protection engineering, and environmental safety. The text discusses fundamental aspects of fire and gas mapping, which has been applied with great success in many parts of the world and is commonly adopted by the major operators in the process industries.

Author: Morgan J. Hurley
Publisher: CRC Press
ISBN: 1482246562
Category : Technology & Engineering
Languages : en
Pages : 213

View

Book Description
Master an Approach Based on Fire Safety Goals, Fire Scenarios, and the Assessment of Design AlternativesPerformance-Based Fire Safety Design demonstrates how fire science can be used to solve fire protection problems in the built environment. It also provides an understanding of the performance-based design process, deterministic and risk-based ana