Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
IRRADIATION BEHAVIOR OF HIGH-BURNUP URANIUM--PLUTONIUM ALLOY PROTOTYPE FUEL ELEMENTS.
Author: The Irradiation Behavior of High-burnup Uranium-plutonium Alloy Prototype Fuels Elements
Author: W. N. BeckThe Effects of Irradiation on Uranium-plutonium-fissium Fuel Alloys
Author: J. A. HorakPublisher:
ISBN:
Category : Alloys
Languages : en
Pages : 40
Book Description
A total of 35 specimens of U-Pu-fissium alloy and 2 specimens of U-10 wt% Pu-5 wt% Mo alloy were irradiated as a part of the fuel-alloy development program for fast breeder reactors at Argonne National Laboratory. Total atom burnups ranged from 1.0 to 1.8% at maximum fuel temperatures ranging from 230 to 470 deg C. Emphasis was placed on the EBR-II Core-III reference fuel material, which is an injection-cast, U-20 wt% Pu-10 wt% fissium alloy. It was found that this material begins to swell catastrophically at irradiation temperatures above 370 deg C. The ability of the fuel to resist swelling did not appear to vary appreciably with minor changes in zirconium or fissium content. Decreasing the Pu to 10 wt%, however, significantly improved the swelling behavior of the alloy. Both pour-cast and thermally cycled material and pour-cast, extruded, and thermally cycled material appeared to be more stable under irradiation than injection-cast material. Under comparable irradiation conditions, the specimens of U-20 wt% Pu- 5 wt% Mo alloy were less dimensionally stable than the U-Pu-fissium alloys investigated.
Irradiation Behavior of Uranium Carbide Fuels
Author: D. I. SinizerPublisher:
ISBN:
Category : Nuclear fuels
Languages : en
Pages : 52
Book Description
Nuclear Science Abstracts
Author: Irradiation of U-Mo Base Alloys
Author: M. P. JohnsonPublisher:
ISBN:
Category : Molybdenum alloys
Languages : en
Pages : 38
Book Description
A series of experiments was designed to assess the suitability of uranium-molybdenum alloys as high-temperature, high-burnup fuels for advanced sodium cooled reactors. Specimens with molybdenum contents between 3 and 10% were subjected to capsule irradiation tests in the Materials Testing Reactor, to burnups up to 10,000 Mwd/MTU at temperatures between 800 and 1500 deg F. The results indicated that molybdenum has a considerable effect in reducing the swelling due to irradiation. For example. 3% molybdemum reduces the swelling from 25%, for pure uranium. to 7% at approximates 3,000 Mwd/MTU at 1270 deg F. Further swelling resistance can be gained by increasing the molybdenum content, but the amount gained becomes successively smaller. At higher irradiation levels, the amount of swelling rapidly becomes greater, and larger amounts of molybdenum are required to provide similar resistance. A limit of 7% swelling, at 900 deg F and an irradiation of 7,230 Mwd/ MTU, requires the use of 10% Nonemolybdenum in the alloy. The burnup rates were in the range of 2.0 to 4.0 x 10p13s fissiom/cc-sec. Small ternary additions of silicon and aluminum were shown to have a noticeable effect in reducing swelling when added to a U-3% Mo alloy base. Under the conditions of the present experiment, 0.26% silicon or 0.38% aluminum were equivalent to 1 to 1 1/2% molybdenum. The Advanced Sodium Cooled Reactor requires a fuel capable of being irradiated to 20,000 Mwd/MTU at temperatures up to 1500 deg C in metal fuel, or equivalent in ceramic fuel. It is concluded that even the highest molybdenum contents considered did not produce a fuel capable of operating satisfactorily under these conditions. The alloys would be useful, however, for less exacting conditions. The U-3% Mo alloy is capable of use up to 3,000 Mwd/MTU at temperatures of 1300 deg F before swelling becomes excessive. The addition of silicon and aluminum would increase this limit to at least 3,000 Mwd/MTU, and possibly more if the
Scientific and Technical Aerospace Reports
Author: Irradiation Behavior of Restrained and Vented Uranium-2 W/o Zirconium Alloy
Author: J. A. HorakPublisher:
ISBN:
Category : Irradiation
Languages : en
Pages : 46
Book Description
Twelve 0.22-in.-diameter fuel specimens containing a longitudinal central vent and clad with 0.010 in. of Type 304 stainless steel were irradiated to evaluate the effect of restraint and a central vent on fuel element stability. The cladding of 10 of the specimens contained porous end plugs to vent any released fission gas and thus to minimize the buildup of gas pressure within the stainless steel cladding. The specimens consisted of a 20% enriched uranium--2 wt% zirconium alloy core surrounded by a natural uranium--2 wt% zirconium alloy sleeve. Eight of the specimens were irradiated to burnups of the enriched core of 6.9 to 12.8% of all atoms (1.2 to 2.2 at.% of the duplex assembly) at maximum fuel temperatures ranging from 280 to 760 deg C. Most of the clad specimens exhibited negligible volume increases as a result of irradiation. Two specimens containing central vents but unclad were irradiated together with the clad specimens in an attempt to differentiate between the effects due to a central vent and the effects due to cladding. The central vent in itself did not appear to reduce the swelling characteristics of the alloy. Mechanical restraint appeared to have extended the useful operating temperatures of the metallic fuel alloy by at least 200 deg C and also greatly extended the burnup levels to which the fuel could be irradiated.
The Effect of Nuclear Radiation on Metallic Fuel Materials
Author: A. A. BauėrPublisher:
ISBN:
Category : Nuclear fuel elements
Languages : en
Pages : 150
Book Description
Author: