Author: Carlo Rabaiotti Publisher: vdf Hochschulverlag AG ISBN: 3728132748 Category : Science Languages : en Pages : 243
Book Description
This research work had the aim of developing a procedure for back-calculating accurate and precise parameter values, describing the mechanical behaviour of the materials built in an existing road structure. After reviewing the existing testing techniques, a new device was designed and assembled at the IGT, Institute for Geotechnical Engineering (ETH Zürich) for measuring the three dimensional deflection bowl under a standard axle load (SAL). Particular attention was paid for obtaining precise and accurate significant measurements for inverse analysis. Three field tests on different locations and road structures were carried out: a flexible pavement type built in a concrete pit (indoor facility) at the EPFL (Ecole Polytechnique Federale de Lausanne), a semirigid type in Hinwil (Switzerland) and a flexible type in Bellinzona (Hinwil). The tests results show that the measured road displacements under a SAL, for relatively low temperatures, are generally reversible and time independent. Laboratory tests (uniaxial compression) were carried out on cores obtained from field samples.The strain measurements of the loaded samples were carried out with strain gages, and validated against devices with different technology (LVDT). The analysis of the test results showed that the materials have different bulk and deviatoric stress-strain behaviour. A new thermodynamical framework for non linear viscoelasticity (hyperviscoelasticity) was developed. Experimentally validated hyperviscoelastic and hyperelastic constitutive laws were adopted respectively for describing the mechanical behaviour of asphalt and cement stabilized mixtures. The inverse analysis of the field tests results was carried out with two different optimization algorithms (Levenberg Marquardt and Mesh Adaptative Direct Search), the FE program ABAQUS, and the developed user defined models. The results demonstrate the accuracy and precision of the parameter values obtained with the proposed inverse analysis procedure, demonstrating a potential for application of the developed technique for non destructing testing of real road structures.
Author: Bernardo Caicedo Publisher: CRC Press ISBN: 0429652135 Category : Technology & Engineering Languages : en Pages : 461
Book Description
At first glance, roads seem like the simplest possible geotechnical structures. However, analysis of these structures runs up against complexities related to the intense stresses experienced by road surfaces, their intense interaction with climate, and the complicated behavior of the materials used in road construction. Modern mechanistic approaches to road design provide the tools capable of developing new technical solutions. However, use of these approaches requires deep understanding of the behavior of constituent materials and their interaction with water and heat which has recently been acquired thanks to advances in geotechnical engineering. The author comprehensively describes and explains these advances and their use in road engineering in the two-volume set Geotechnics of Roads, compiling information that had hitherto only been available in numerous research papers. Geotechnics of Roads: Fundamentals presents stresses and strains in road structures, water and heat migration within and between layers of road materials, and the effects of water on the strength and stiffness of those materials. It includes a deep analysis of soil compaction, one of the most important issues in road construction. Compaction accounts for only a small proportion of a construction budget but its effects on the long-term performance of a road are decisive. In addition, the book describes methodologies for nondestructive road evaluation including analysis of continuous compaction control, a powerful technique for real-time quality control of road structures. This unique book will be of value to civil, structural and geotechnical engineers worldwide.
Author: Bernardo Caicedo Publisher: CRC Press ISBN: 1351850008 Category : Technology & Engineering Languages : en Pages : 782
Book Description
At first glance, roads seem like the simplest possible geotechnical structures. However, analysis of these structures runs up against complexities related to the intense stresses experienced by road surfaces, their intense interaction with climate, and the complicated behavior of the materials used in road construction. Modern mechanistic approaches to road design provide the tools capable of developing new technical solutions. However, use of these approaches requires deep understanding of the behavior of constituent materials and their interaction with water and heat which has recently been acquired thanks to advances in geotechnical engineering. The author comprehensively describes and explains these advances and their use in road engineering in the two-volume set Geotechnics of Roads, compiling information that had hitherto only been available in numerous research papers. Geotechnics of Roads: Fundamentals presents stresses and strains in road structures, water and heat migration within and between layers of road materials, and the effects of water on the strength and stiffness of those materials. It includes a deep analysis of soil compaction, one of the most important issues in road construction. Compaction accounts for only a small proportion of a construction budget but its effects on the long-term performance of a road are decisive. In addition, the book describes methodologies for nondestructive road evaluation including analysis of continuous compaction control, a powerful technique for real-time quality control of road structures. Geotechnics of Roads: Advanced Analysis and Modeling develops 23 extended examples that cover most of the theoretical aspects presented in the book Geotechnics of Roads, Fundamentals. Moreover, for most examples, Volume 2 describes algorithms for solving complex problems and provides Matlab® scripts for their solution. Consequently, Volume 2 is a natural complement of the book Geotechnics of roads: Fundamentals. This unique set will be of value to civil, structural and geotechnical engineers worldwide.
Author: Erol Tutumluer Publisher: Springer Nature ISBN: 3030772381 Category : Science Languages : en Pages : 1059
Book Description
This volume presents selected papers presented during the 4th International Conference on Transportation Geotechnics. The papers address the geotechnical challenges in design, construction, maintenance, monitoring, and upgrading of roads, railways, airfields, and harbor facilities and other ground transportation infrastructure with the goal of providing safe, economic, environmental, reliable and sustainable infrastructures. This volume will be of interest to postgraduate students, academics, researchers, and consultants working in the field of civil and transport infrastructure.
Author: Bernardo Caicedo Publisher: CRC Press ISBN: 0429649495 Category : Technology & Engineering Languages : en Pages : 569
Book Description
At first glance, roads seem like the simplest possible geotechnical structures. However, analysis of these structures runs up against complexities related to the intense stresses experienced by road surfaces, their intense interaction with climate, and the complicated behavior of the materials used in road construction. Modern mechanistic approaches to road design provide the tools capable of developing new technical solutions. However, use of these approaches requires deep understanding of the behavior of constituent materials and their interaction with water and heat which has recently been acquired thanks to advances in geotechnical engineering. The author comprehensively describes and explains these advances and their use in road engineering in the two-volume set Geotechnics of Roads, compiling information that had hitherto only been available in numerous research papers. Geotechnics of Roads: Fundamentals presents stresses and strains in road structures, water and heat migration within and between layers of road materials, and the effects of water on the strength and stiffness of those materials. It includes a deep analysis of soil compaction, one of the most important issues in road construction. Compaction accounts for only a small proportion of a construction budget but its effects on the long-term performance of a road are decisive. In addition, the book describes methodologies for nondestructive road evaluation including analysis of continuous compaction control, a powerful technique for real-time quality control of road structures. This unique book will be of value to civil, structural and geotechnical engineers worldwide.
Author: Kenichi Soga Publisher: CRC Press ISBN: 1315737329 Category : Technology & Engineering Languages : en Pages : 1668
Book Description
Geomechanics from Micro to Macro contains 268 papers presented at the International Symposium on Geomechanics from Micro and Macro (IS-Cambridge, UK, 1-3 September 2014). The symposium created a forum for the dissemination of new advances in the micro-macro relations of geomaterial behaviour and its modelling. The papers on experimental investigati
Author: Kok-Kwang Phoon Publisher: CRC Press ISBN: 1003801250 Category : Technology & Engineering Languages : en Pages : 521
Book Description
Uncertainty, Modeling, and Decision Making in Geotechnics shows how uncertainty quantification and numerical modeling can complement each other to enhance decision-making in geotechnical practice, filling a critical gap in guiding practitioners to address uncertainties directly. The book helps practitioners acquire a working knowledge of geotechnical risk and reliability methods and guides them to use these methods wisely in conjunction with data and numerical modeling. In particular, it provides guidance on the selection of realistic statistics and a cost-effective, accessible method to address different design objectives, and for different problem settings, and illustrates the value of this to decision-making using realistic examples. Bringing together statistical characterization, reliability analysis, reliability-based design, probabilistic inverse analysis, and physical insights drawn from case studies, this reference guide from an international team of experts offers an excellent resource for state-of-the-practice uncertainty-informed geotechnical design for specialist practitioners and the research community.
Author: Ed Ellis Publisher: CRC Press ISBN: 0203885945 Category : Technology & Engineering Languages : en Pages : 788
Book Description
Highways provide the arteries of modern society. The interaction of road, rail and other transport infrastructure with the ground is unusually intimate, and thus needs to be well-understood to provide economic and reliable infrastructure for society. Challenges include not only the design of new infrastructure (often on problematic ground), but inc
Author: Bernardo Caicedo Publisher: CRC Press ISBN: 0429649487 Category : Technology & Engineering Languages : en Pages : 255
Book Description
At first glance, roads seem like the simplest possible geotechnical structures. However, analysis of these structures runs up against complexities related to the intense stresses experienced by road surfaces, their intense interaction with climate, and the complicated behavior of the materials used in road construction. Modern mechanistic approaches to road design provide the tools capable of developing new technical solutions. However, use of these approaches requires deep understanding of the behavior of constituent materials and their interaction with water and heat which has recently been acquired thanks to advances in geotechnical engineering. The author comprehensively describes and explains these advances and their use in road engineering in the two-volume set Geotechnics of Roads, compiling information that had hitherto only been available in numerous research papers. Geotechnics of Roads: Advanced Analysis and Modeling develops 23 extended examples that cover most of the theoretical aspects presented in the book Geotechnics of Roads: Fundamentals. Moreover, for most examples, Volume 2 describes algorithms for solving complex problems and provides Matlab® scripts for their solution. Consequently, Volume 2 is a natural complement of the book Geotechnics of Roads: Fundamentals. This unique book will be of value to civil, structural and geotechnical engineers worldwide.
Author: A. Anagnostopoulos Publisher: IOS Press ISBN: 1614991995 Category : Technology & Engineering Languages : en Pages : 664
Book Description
This publication contains the papers presented at the 15th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), held in Athens, Greece. Considerable progress has been made in recent decades in understanding the engineering behavior of those hard soils and weak rocks that clearly fall into either the field of soil or of rock mechanics, and there have been important developments in design and construction methods to cope with them. Progress would be even more desirable, however, for those materials which fall into the ‘grey’ area between soils and rocks. They present particular challenges due to their diversity, the difficulties and problems arising in their identification and classification, their sampling and testing and in the establishment of suitable models to adequately describe their behavior. The publication aims to provide an updated overview of the existing worldwide knowledge of the geological features, engineering properties and behavior of such hard soils and weak rocks, with particular reference to the design and construction methods and problems associated with these materials. Part 4 was published post-conference and includes Conference Reports.
Author: Carlo Rabaiotti
Author: Bernardo Caicedo
Author: Bernardo Caicedo
Author: Erol Tutumluer
Author: Bernardo Caicedo
Author: Kenichi Soga
Author: Kok-Kwang Phoon
Author: Ed Ellis
Author: Bernardo Caicedo
Author: A. Anagnostopoulos