Integrated High-Vin Multi-MHz Converters PDF Download

Author: Jürgen Wittmann
Publisher: Springer Nature
ISBN: 3030252574
Category : Technology & Engineering
Languages : en
Pages : 184

View

Book Description
This book provides readers with guidelines for designing integrated multi-MHz-switching converters for input voltages/system supplies up to 50V or higher. Coverage includes converter theory, converter architectures, circuit design, efficiency, sizing of passives, technology aspects, etc. The author discusses new circuit designs, new architectures and new switching concepts, including dead-time control and soft-switching techniques that overcome current limitations of these converters. The discussion includes technology related issues and helps readers to choose the right technology for fast-switching converters. This book discusses benefits and drawbacks in terms of integration, size and cost, efficiency and complexity, and enables readers to make trade-offs in design, given different converter parameters. Describes a study for increasing switching frequencies up to 30 MHz at input voltages up to 50V or higher in the scaling of the size of switching converter passives; Analyzes various buck converter implementations and shows that a preference due to higher efficiency depends on the operating point, on the available switch technologies, and on the implementation of the high-side supply generation; Describes an efficiency model based on a four-phase model, which enables separation of loss causes and loss locations.

Author: Bernhard Wicht
Publisher: John Wiley & Sons
ISBN: 1119123089
Category : Technology & Engineering
Languages : en
Pages : 484

View

Book Description
Design of Power Management Integrated Circuits Comprehensive resource on power management ICs affording new levels of functionality and applications with cost reduction in various fields Design of Power Management Integrated Circuits is a comprehensive reference for power management IC design, covering the circuit design of main power management circuits like linear and switched-mode voltage regulators, along with sub-circuits such as power switches, gate drivers and their supply, level shifters, the error amplifier, current sensing, and control loop design. Circuits for protection and diagnostics, as well as aspects of the physical design like lateral and vertical power delivery, pin-out, floor planning, grounding/supply guidelines, and packaging, are also addressed. A full chapter is dedicated to the design of integrated passives. The text illustrates the application of power management integrated circuits (PMIC) to growth areas like computing, the Internet of Things, mobility, and renewable energy. Includes numerous real-world examples, case studies, and exercises illustrating key design concepts and techniques. Offering a unique insight into this rapidly evolving technology through the author’s experience developing PMICs in both the industrial and academic environment, Design of Power Management Integrated Circuits includes information on: Capacitive, inductive and hybrid DC-DC converters and their essential circuit blocks, covering error amplifiers, comparators, and ramp generators Sensing, protection, and diagnostics, covering thermal protection, inductive loads and clamping structures, under-voltage, reference and power-on reset generation Integrated MOS, MOM and MIM capacitors, integrated inductors Control loop design and PWM generation ensuring stability and fast transient response; subharmonic oscillations in current mode control (analysis and circuit design for slope compensation) DC behavior and DC-related circuit design, covering power efficiency, line and load regulation, error amplifier, dropout, and power transistor sizing Commonly used level shifters (including sizing rules) and cascaded (tapered) driver sizing and optimization guidelines Optimizing the physical design considering packaging, floor planning, EMI, pinout, PCB design and thermal design Design of Power Management Integrated Circuits is an essential resource on the subject for circuit designers/IC designers, system engineers, and application engineers, along with advanced undergraduate students and graduate students in related programs of study.

Author: Dianguo Xu
Publisher: Springer Nature
ISBN: 9811574243
Category : Technology & Engineering
Languages : en
Pages : 129

View

Book Description
This book analyzes multi-MHz high frequency resonant DC-DC power converters with operating frequencies ranging from several MHz to tens of MHz in detail, aiming to support researchers and engineers with a focus on multi-MHz high frequency converters. The inverter stage, rectifier stage, matching network stage are analyzed in detail. Based on the three basic stages, typical non-isolated and isolated resonant DC-DC converters are depicted. To reduce the high driving loss under multi-MHz, resonant driving methods are introduced and improved. Also, the design and selection methods of passive and active component under multi-MHz frequency are described, especially for aircore inductor and transformer. Furthermore, multi-MHz resonant converter provides an approach for achieving flexible system.

Author: Tobias Funk
Publisher: Springer Nature
ISBN: 303053250X
Category : Technology & Engineering
Languages : en
Pages : 144

View

Book Description
This book provides readers with a single-source reference to current sensing integrated circuit design. It is written in handbook style, including systematic guidelines and implementation examples. The authors focus on the implementation of wide-bandwidth current sensing on a single microchip, toward usage in applications such as sensing, control and optimization of the energy flow in growth areas like industrial electronics, renewable energies, smart grids, electromobility and the Internet of Things. Provides readers with a comprehensive, all-in-one source for current sensing integrated circuit design, including implementation examples; Discusses modeling and optimization of on-chip Rogowski coil and Hall sensor in both lateral and vertical orientation; Includes noise reduction techniques, such as auto-zeroing and chopping; Covers open-loop and closed-loop sensor front-end design; Presents the first on-chip current sensor with a planar coil placed besides a power line to measure internal signal currents and the first off-chip current sensor with a helix-shaped coil for external signal currents in the multi-MHz region.

Author: Peter Renz
Publisher: Springer Nature
ISBN: 3030639444
Category : Technology & Engineering
Languages : en
Pages : 181

View

Book Description
This book provides a comprehensive, single-source on resonant switched-capacitor converters. It is written in the style of a handbook, with systematic guidelines, and includes implementation examples. The authors explore integrated hybrid resonant DCDC converters in order to achieve highly compact, energy efficient and cost-effective power management solutions in the growing fields of wearables and internet-of-things applications. They provide an introduction into hybrid converters as a new and promising converter class, which merges capacitive and inductive conversion concepts into one. Coverage ranges from fundamentals to implementation details, including topics such as power stage design, gate drive schemes, different control mechanisms for resonant operation and integrated passives. Introduces a new, multi-ratio resonant converter architecture, which enables lower switching frequencies and better passive component utilization; Discusses circuit block design for high efficiency of the power stage; Explores implementation details and concepts for integrated passives; Derives models, implements and compares to each other different control mechanisms.

Author: Ibrahim (Abe) M. Elfadel
Publisher: Springer
ISBN: 3319931008
Category : Technology & Engineering
Languages : en
Pages : 395

View

Book Description
This book documents some of the most recent advances on the physical layer of the Internet of Things (IoT), including sensors, circuits, and systems. The application area selected for illustrating these advances is that of autonomous, wearable systems for real-time medical diagnosis. The book is unique in that it adopts a holistic view of such systems and includes not only the sensor and processing subsystems, but also the power, communication, and security subsystems. Particular attention is paid to the integration of these IoT subsystems as well as the prototyping platforms needed for achieving such integration. Other unique features include the discussion of energy-harvesting subsystems to achieve full energy autonomy and the consideration of hardware security as a requirement for the integrity of the IoT physical layer. One unifying thread of the various designs considered in this book is that they have all been fabricated and tested in an advanced, low-power CMOS process, namely GLOBALFOUNDRIES 65nm CMOS LPe.

Author: G. Jack Lipovski
Publisher: Elsevier
ISBN: 0080517269
Category : Technology & Engineering
Languages : en
Pages : 513

View

Book Description
Single and Multi-Chip Microcontroller Interfacing teaches the principles of designing and programming microcontrollers that will be used in a wide variety of electronic and mechanical devices, machines and systems. Applications are wide, ranging from controlling an automobile to measuring, controlling and displaying your home's temperature. The book utilizes the new Motorola 68Hc12 microcontroller as the primary example throughout. This new microprocessor is the latest development in mid-level 16-bit microcontrollers that will be used world wide due to its low cost and ease of programming. The book features the most popular programming languages--C and C++--in describing basic and advanced techniques. The 68Hc12 will replace many of the existing 8-bit microprocessors currently used in applications and teaching. - First book available on the new Motorola 68HC12 microcontroller - Thorough discussion of C and C++ programming of I/O ports and synchronization mechanisms - Concrete discussion of applications of the popular, readily available, inexpensive and well-designed 68HC12 - Many examples and over 200 problems at the end of each chapters - Separate sections describing object-oriented interfacing This book is ideal for professional engineers as well as students in university courses in micro-processors/microcontrollers in departments of electrical engineering, computer engineering or computer science; It is also appropriate for advanced technical school courses. The book will also be a valuable professional reference for electrical engineers and mechanical engineers in industry working with the design of electronic and electromechanical devices and systems

Author: Amit Patra
Publisher: CRC Press
ISBN: 1040117406
Category : Technology & Engineering
Languages : en
Pages : 400

View

Book Description
This book intends to be a comprehensive text on the topic of integrated circuits for power management, putting together both theoretical foundations and practical details, leading to successful design practices in research and industry. It covers all the three main categories of power management circuits, viz., linear regulators, inductor-based switchers and switched-capacitor circuits, and presents detailed discussion of their common topologies, operation and modeling. Features Includes underlying theory and design/implementation practical ingredients for power management integrated circuits (PMICs). Provides in-depth analysis of topologies and circuits related to linear regulators, switched-capacitor converters and inductor-based converters. Covers all the relevant topics at the intersection between power electronics and integrated circuit design areas. Provides guidelines for design of circuits and solutions for all the pertinent topologies. Indicates all important issues and the related trade-offs in the design of PMICs. The book will be a valuable resource for senior- and graduate-level students as well as industry professionals who have done university-level courses on analog circuit design, control systems and power electronics.

Author: Tom Van Breussegem
Publisher: Springer Science & Business Media
ISBN: 146144280X
Category : Technology & Engineering
Languages : en
Pages : 219

View

Book Description
This book provides a detailed analysis of all aspects of capacitive DC-DC converter design: topology selection, control loop design and noise mitigation. Readers will benefit from the authors’ systematic overview that starts from the ground up, in-depth circuit analysis and a thorough review of recently proposed techniques and design methodologies. Not only design techniques are discussed, but also implementation in CMOS is shown, by pinpointing the technological opportunities of CMOS and demonstrating the implementation based on four state-of-the-art prototypes.

Author: Rudy J. van de Plassche
Publisher: Springer Science & Business Media
ISBN: 1461527481
Category : Technology & Engineering
Languages : en
Pages : 535

View

Book Description
Analog-to-digital (A/D) and digital-to-analog (D/A) converters provide the link between the analog world of transducers and the digital world of signal processing, computing and other digital data collection or data processing systems. Several types of converters have been designed, each using the best available technology at a given time for a given application. For example, high-performance bipolar and MOS technologies have resulted in the design of high-resolution or high-speed converters with applications in digital audio and video systems. In addition, high-speed bipolar technologies enable conversion speeds to reach the gigaHertz range and thus have applications in HDTV and digital oscilloscopes. Integrated Analog-to-Digital and Digital-to-Analog Converters describes in depth the theory behind and the practical design of these circuits. It describes the different techniques to improve the accuracy in high-resolution A/D and D/A converters and also special techniques to reduce the number of elements in high-speed A/D converters by repetitive use of comparators. Integrated Analog-to-Digital and Digital-to-Analog Converters is the most comprehensive book available on the subject. Starting from the basic elements of theory necessary for a complete understanding of the design of A/D and D/A converters, this book describes the design of high-speed A/D converters, high-accuracy D/A and A/D converters, sample-and-hold amplifiers, voltage and current reference sources, noise-shaping coding and sigma-delta converters. Integrated Analog-to-Digital and Digital-to-Analog Converters contains a comprehensive bibliography and index and also includes a complete set of problems. This book is ideal for use in an advanced course on the subject and is an essential reference for researchers and practicing engineers.