Author: Shad M. Sargand Publisher: ISBN: Category : Pavements Languages : en Pages : 264
Book Description
The US Route 30 bypass of Wooster, Ohio, in Wayne County, "WAY-30", was constructed to demonstrate two types of extended service pavements, a long-life Portland cement concrete (PCC) pavement on the eastbound lanes and an asphalt concrete (AC) perpetual pavement on the westbound lanes. Both pavements are designed to provide 50 years or more of service with minimal maintenance (e.g. resurfacing). The PCC pavement structure features a thick and extra-wide slab on an asphalt treated base, while the AC pavement structure features a Superpave surface and a Fatigue Resistant Layer (FRL). Two sections in each direction were instrumented with pressure cells to monitor subgrade pressures and deep and shallow LVDTs to record pavement deflections. The AC test section also had transverse and longitudinal strain gages. A weather station was also used to monitor environmental conditions. Nondestructive testing of the subgrade was conducted prior to pavement placement. Pavement materials and samples were tested in the laboratory to determine material parameters. Controlled vehicle load and falling weight deflectometer tests were applied to the AC pavement shortly after the road opened to traffic in December 2005 and again under hot weather conditions in July 2006. Similar tests on the PCC pavement were conducted in December 2005 and August 2006. The response on both types of pavement met their respective design criteria. A verification analysis of the AC pavement response using the elastic layer system (ELS) simulation using material properties derived from laboratory and field sample data yielded unsatisfactory matches, suggesting that some refinement of the approach is needed
Author: José P. Aguiar-Moya Publisher: Springer ISBN: 3319427970 Category : Technology & Engineering Languages : en Pages : 877
Book Description
This compendium gathers the latest advances in the area of Accelerated Pavement Testing (APT), a means of testing full-scale pavement construction in an accelerated manner for structural deterioration in a very short term. Compiling novel research results presented at the 5th International Conference on Accelerated Pavement Testing, San Jose, Costa Rica, the volume serves as a timely and highly relevant resource for materials scientists and engineers interested in determining the performance of a pavement structure during its service life (10+ years) in a few weeks or months.
Author: Highway Innovative Technology Evaluation Center (U.S.) Publisher: ASCE Publications ISBN: 9780784474891 Category : Technology & Engineering Languages : en Pages : 84
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report summarizes the results of detailed evaluations performed on four handheld and two mobile pavement marking retroreflectometers. The evaluations were designed to test the measurement bias, repeatability, and reproducibility of handheld and mobile retroreflectometers produced by several manufacturers.
Author: David Jones Publisher: CRC Press ISBN: 0203073010 Category : Technology & Engineering Languages : en Pages : 570
Book Description
Pack: Book and CDInternationally, full-scale accelerated pavement testing, either on test roads or linear/circular test tracks, has proven to be a valuable tool that fills the gap between models and laboratory tests and long-term experiments on in-service pavements. Accelerated pavement testing is used to improve understanding of pavement behavior,
Author: Publisher: ISBN: Category : Pavements, Asphalt Languages : en Pages : 138
Book Description
Warm Mix Asphalt (WMA) is a new technology that was introduced in Europe in 1995. WMA offers several advantages over conventional asphalt concrete mixtures, including: reduced energy consumption, reduced emissions, improved or more uniform binder coating of aggregate which should reduce mix surface aging, and extended construction season in temperate climates. Three WMA techniques, Aspha-min, Sasobit, and Evotherm, were used to reduce the viscosity of the asphalt binder at certain temperatures and to dry and fully coat the aggregates at a lower production temperature than conventional hot mix asphalt. The reduction in mixing and compaction temperatures of asphalt mixtures leads to a reduction in both fuel consumption and emissions. This research project had two major components, the outdoor field study on SR541 in Guernsey County and the indoor study in the Accelerated Pavement Load Facility (APLF). Each study included the application of four types of asphalt surface layer, including standard hot mix asphalt as a control and three warm mixes: Evotherm, Aspha-min, and Sasobit. The outdoor study began with testing of the preexisting pavement and subgrade, the results of which indicated that while the pavement and subgrade were not uniform, there were no significant problems or variations that would be expected to lead to differences in performance of the planned test sections. During construction, the outdoor study included collection of emissions samples at the plant and on the construction site as well as thermal readings from the site. Afterwards, the outdoor study included the periodic collection and laboratory analysis of core samples and visual inspections of the road. Roughness (IRI) measurements were made shortly after construction and after a year of service. The indoor study involved the construction of four lanes of perpetual pavement, each topped with one of the test mixes. The lanes were further divided into northern and southern halves, with the northern halves having a full 16 in (40 cm) perpetual pavement, and with the southern halves with thicknesses decreasing in one in (2.5 cm) increments by reducing the intermediate layer. The dense graded aggregate base was increased to compensate for the change in pavement thickness. The southern half of each lane was instrumented to measure temperature, subgrade pressure, deflection relative to top of subgrade and to a point 5 ft (1.5 m) down, and longitudinal and transverse strains at the base of the fatigue resistance layer (FRL). The APLF had the temperature set to 40°F (4.4°C), 70°F (21.1°C), and 104°F (40°C), in that order. At each temperature, rolling wheel loads of 6000 lb (26.7 kN), 9000 lb (40 kN), and 12,000 lb (53.4 kN) were applied at lateral shifts of 3 in (76 mm), 1 in (25 mm), -4 in ( -102 mm), and -9 in ( - 229 mm) and the response measured. Then each plane was subjected to 10,000 passes of the rolling wheel load of 9000 lb (40 kN) at about 5 mph (8 km/h). Profiles were measured after 100, 300, 1000, 3000, and 10,000 passes with a profilometer to assess consolidation of each surface. After the 10,000 passes of the rolling wheel load were completed, a second set of measurements was made under rolling wheel loads of 6000 lb (26.7 kN), 9000 lb (40 kN), and 12,000 lb (53.4 kN) at the same lateral shifts as before. Additionally, the response of the pavement instrumentation was recorded during drops of a Falling Weight Deflectometer (FWD).
Author: Shad M. Sargand
Author: José P. Aguiar-Moya
Author: Highway Innovative Technology Evaluation Center (U.S.)
Author: 
Author: David Jones
Author: 
Author: National Research Council (U.S.). Highway Research Board
Author: 
Author: 
Author: