Author: Florence Broussaud
Publisher:
ISBN:
Category :
Languages : fr
Pages : 264
Book Description
ETUDE EXPERIMENTALE POUR LES ALLIAGES CONTENANT 0 A 1% DE MAGNESIUM. ANALYSE PAR MICROSCOPIE ELECTRONIQUE EN TRANSMISSION ET PAR ANALYSE ENTHALPIQUE DIFFERENTIELLE DE L'EVOLUTION DE LA PRECIPITATION. ANALYSE DE LA CORRELATION ENTRE LA PRECIPITATION ET LES PROPRIETES MECANIQUES EN UTILISANT DES ESSAIS DE DURETE ET DE TRACTION. SEULS LES ALLIAGES A FAIBLE TENEUR EN MAGNESIUM S'AVERENT INTERESSANTS SUR LE PLAN D'UNE APPLICATION. INFLUENCE DE LA STRUCTURE (CRISTALLISATION ET TEXTURE) SUR LES PROPRIETES MECANIQUES ET EN PARTICULIER SUR LEUR HETEROGENEITE SUIVANT LA DIRECTION TRAVERS-LONG
INFLUENCE DE LA TENEUR EN MAGNESIUM SUR LA MICROSTRUCTURE ET LES PROPRIETES MECANIQUES D'ALLIAGES AL-LI-CU-MG
Author: Florence Broussaud
Publisher:
ISBN:
Category :
Languages : fr
Pages : 264
Book Description
ETUDE EXPERIMENTALE POUR LES ALLIAGES CONTENANT 0 A 1% DE MAGNESIUM. ANALYSE PAR MICROSCOPIE ELECTRONIQUE EN TRANSMISSION ET PAR ANALYSE ENTHALPIQUE DIFFERENTIELLE DE L'EVOLUTION DE LA PRECIPITATION. ANALYSE DE LA CORRELATION ENTRE LA PRECIPITATION ET LES PROPRIETES MECANIQUES EN UTILISANT DES ESSAIS DE DURETE ET DE TRACTION. SEULS LES ALLIAGES A FAIBLE TENEUR EN MAGNESIUM S'AVERENT INTERESSANTS SUR LE PLAN D'UNE APPLICATION. INFLUENCE DE LA STRUCTURE (CRISTALLISATION ET TEXTURE) SUR LES PROPRIETES MECANIQUES ET EN PARTICULIER SUR LEUR HETEROGENEITE SUIVANT LA DIRECTION TRAVERS-LONG
Publisher:
ISBN:
Category :
Languages : fr
Pages : 264
Book Description
ETUDE EXPERIMENTALE POUR LES ALLIAGES CONTENANT 0 A 1% DE MAGNESIUM. ANALYSE PAR MICROSCOPIE ELECTRONIQUE EN TRANSMISSION ET PAR ANALYSE ENTHALPIQUE DIFFERENTIELLE DE L'EVOLUTION DE LA PRECIPITATION. ANALYSE DE LA CORRELATION ENTRE LA PRECIPITATION ET LES PROPRIETES MECANIQUES EN UTILISANT DES ESSAIS DE DURETE ET DE TRACTION. SEULS LES ALLIAGES A FAIBLE TENEUR EN MAGNESIUM S'AVERENT INTERESSANTS SUR LE PLAN D'UNE APPLICATION. INFLUENCE DE LA STRUCTURE (CRISTALLISATION ET TEXTURE) SUR LES PROPRIETES MECANIQUES ET EN PARTICULIER SUR LEUR HETEROGENEITE SUIVANT LA DIRECTION TRAVERS-LONG
Experimental and Thermodynamic Study on the Mg-X (X
Author: Jian Wang
Publisher:
ISBN: 9781321206173
Category :
Languages : en
Pages : 399
Book Description
Publisher:
ISBN: 9781321206173
Category :
Languages : en
Pages : 399
Book Description
Effects of Metallurgical Parameters on the Decomposition Of?-AlFeMgSi Phase in AL-SI-MG Alloys and Its Influence on the Mechanical Properties
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE AL LI CU MG (2091) ALLOYS
Author: Philippe Gomiero
Publisher:
ISBN:
Category :
Languages : en
Pages : 134
Book Description
L'OBJECTIF DE CE TRAVAIL EST DE CORRELER L'EVOLUTION DE LA MICROSTRUCTURE A L'EVOLUTION DES PROPRIETES MECANIQUES D'UN ALLIAGE AL-LI-CU-MG (ZR), TYPE 2091, A L'ETAT SOUS REVENU, EN LES COMPARANT AUX ALLIAGES MODELES AL LI ET AL CU MG. UNE ETUDE FINE DE LA MICROSTRUCTURE DE L'ALLIAGE A ETE EFFECTUEE PAR MICROANALYSE X, DIFFUSION CENTRALE EN RAYON X, MICROCALORIMETRIE ET MICROSCOPIE ELECTRONIQUE EN TRANSMISSION. ELLE A MIS EN EVIDENCE: I) UNE PHASE GROSSIERE R EN QUANTITE NON NEGLIGEABLE, QUI DIMINUE LA TENEUR EN SOLUTES PAR RAPPORT A LA COMPOSITION INITIALE; II) UNE PHASE AL#3LI SPHERIQUE DE STRUCTURE L1#2, ET DES ZONES GPB (PLAQUETTES RICHES EN CUIVRE ET MAGNESIUM); III) DES LATTES S SEMI-COHERENTES SUR UNE STRUCTURE DENSE ET ORIENTEE DE DEFAUTS DE TREMPE. A PARTIR DE L'ETUDE DE L'EVOLUTION DE LA MICROSTRUCTURE LE DURCISSEMENT STRUCTURAL MESURE A PU ETRE CORRECTEMENT INTERPRETE A PARTIR DE MODELES EXISTANTS, EN TENANT COMPTE ENTRE AUTRES D'UN EFFET D'ORDRE POUR LA PRECIPITATION AL#3LI ET D'UN EFFET DE MODULE POUR LES ZONES GPB. LE DURCISSEMENT D'ECROUISSAGE EST DECRIT PAR LE MODELE D'ASHBY, EN TENANT COMPTE DE LA LOCALISATION DE LA DEFORMATION. L'EVOLUTION DES CARACTERISTIQUES DE L'EFFET PORTEVIN LE CHATELIER EN FONCTION DU REVENU EST INVOQUEE POUR RENDRE COMPTE DE LA CHUTE DE TENACITE, EN TERMES DE DISSIPATION PLASTIQUE EN TETE DE FISSURE
Publisher:
ISBN:
Category :
Languages : en
Pages : 134
Book Description
L'OBJECTIF DE CE TRAVAIL EST DE CORRELER L'EVOLUTION DE LA MICROSTRUCTURE A L'EVOLUTION DES PROPRIETES MECANIQUES D'UN ALLIAGE AL-LI-CU-MG (ZR), TYPE 2091, A L'ETAT SOUS REVENU, EN LES COMPARANT AUX ALLIAGES MODELES AL LI ET AL CU MG. UNE ETUDE FINE DE LA MICROSTRUCTURE DE L'ALLIAGE A ETE EFFECTUEE PAR MICROANALYSE X, DIFFUSION CENTRALE EN RAYON X, MICROCALORIMETRIE ET MICROSCOPIE ELECTRONIQUE EN TRANSMISSION. ELLE A MIS EN EVIDENCE: I) UNE PHASE GROSSIERE R EN QUANTITE NON NEGLIGEABLE, QUI DIMINUE LA TENEUR EN SOLUTES PAR RAPPORT A LA COMPOSITION INITIALE; II) UNE PHASE AL#3LI SPHERIQUE DE STRUCTURE L1#2, ET DES ZONES GPB (PLAQUETTES RICHES EN CUIVRE ET MAGNESIUM); III) DES LATTES S SEMI-COHERENTES SUR UNE STRUCTURE DENSE ET ORIENTEE DE DEFAUTS DE TREMPE. A PARTIR DE L'ETUDE DE L'EVOLUTION DE LA MICROSTRUCTURE LE DURCISSEMENT STRUCTURAL MESURE A PU ETRE CORRECTEMENT INTERPRETE A PARTIR DE MODELES EXISTANTS, EN TENANT COMPTE ENTRE AUTRES D'UN EFFET D'ORDRE POUR LA PRECIPITATION AL#3LI ET D'UN EFFET DE MODULE POUR LES ZONES GPB. LE DURCISSEMENT D'ECROUISSAGE EST DECRIT PAR LE MODELE D'ASHBY, EN TENANT COMPTE DE LA LOCALISATION DE LA DEFORMATION. L'EVOLUTION DES CARACTERISTIQUES DE L'EFFET PORTEVIN LE CHATELIER EN FONCTION DU REVENU EST INVOQUEE POUR RENDRE COMPTE DE LA CHUTE DE TENACITE, EN TERMES DE DISSIPATION PLASTIQUE EN TETE DE FISSURE
Magnesium
Author: Talal al- Samman
Publisher: Cuvillier Verlag
ISBN: 3867276633
Category :
Languages : en
Pages : 23
Book Description
Publisher: Cuvillier Verlag
ISBN: 3867276633
Category :
Languages : en
Pages : 23
Book Description
The Influence of Solution Treatment Time and Quench Rate on Microstructure and Mechanical Properties of High-Magnesium Aluminum-Magnesium Alloys
Author: Reuben H. Shirah
Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 60
Book Description
Aluminum alloys containing 8-10 wt pct magnesium with further minor additions of Cu and Mn were solution treated for either 10 hours or 24 hours and subsequently quenched in either oil or water. Microstructural analysis by transmission electron microscopy and optical microscopy demonstrated that a 24-hour solution treatment when followed by water quenching was effective in retention of Mg in solution promoting more uniform precipitation during subsequent warm rolling, especially in an alloy containing 8.14 wt pct Mg-0.41 wt pct Cu. Tension and fatigue testing revealed improved fatigue resistance for this alloy when comparison was made to shorter solution treatment times and less severe quench conditions. The addition of Mn, possibly in conjunction with increased solution treatment temperature, appears to be especially effective in development of a homogeneous microstructure; an alloy containing 10.2 wt pct Mg-0.52 wt pct Mn exhibited a yielded strength of 398 Mpa (57.8 Ksi), a tensile strength of 455 Mpa (75.8 Ksi) with 11 pct elongation to fracture. (Author).
Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 60
Book Description
Aluminum alloys containing 8-10 wt pct magnesium with further minor additions of Cu and Mn were solution treated for either 10 hours or 24 hours and subsequently quenched in either oil or water. Microstructural analysis by transmission electron microscopy and optical microscopy demonstrated that a 24-hour solution treatment when followed by water quenching was effective in retention of Mg in solution promoting more uniform precipitation during subsequent warm rolling, especially in an alloy containing 8.14 wt pct Mg-0.41 wt pct Cu. Tension and fatigue testing revealed improved fatigue resistance for this alloy when comparison was made to shorter solution treatment times and less severe quench conditions. The addition of Mn, possibly in conjunction with increased solution treatment temperature, appears to be especially effective in development of a homogeneous microstructure; an alloy containing 10.2 wt pct Mg-0.52 wt pct Mn exhibited a yielded strength of 398 Mpa (57.8 Ksi), a tensile strength of 455 Mpa (75.8 Ksi) with 11 pct elongation to fracture. (Author).
Role of Magnesium Addition on the Occurence of Incipient Melting in Experimental and Commercial Al-Si-Cu Alloys and Its Influence on the Alloy Microstructure and Tensile Properties
Author: Deyu Yang
Publisher:
ISBN: 9781412313322
Category : Aluminum alloys
Languages : en
Pages : 258
Book Description
Publisher:
ISBN: 9781412313322
Category : Aluminum alloys
Languages : en
Pages : 258
Book Description
Influence of Processing Variables and Aluminum Content on the Microstructure and Mechanical Properties of Cast Mg-Al Alloys
Author: Blair Edward Carlson
Publisher:
ISBN:
Category : Aluminum
Languages : en
Pages : 244
Book Description
Publisher:
ISBN:
Category : Aluminum
Languages : en
Pages : 244
Book Description
Effects of Magnesium Content and Aging Conditions on the Impact Toughness of 319-type Al-Si-Cu-Mg Alloys
Author: Mohamed Fawzy Ibrahim
Publisher:
ISBN: 9781412316392
Category : Aluminum alloys
Languages : en
Pages : 344
Book Description
Publisher:
ISBN: 9781412316392
Category : Aluminum alloys
Languages : en
Pages : 344
Book Description
Influence des vibrations à basse fréquence sur la microstructure d'alliages Al-Mg coulés en moule permanent
Author: Stéphane Thibodeau
Publisher:
ISBN:
Category : Aluminum-magnesium alloys
Languages : fr
Pages : 0
Book Description
L'une des façons d' augmenter les performances mécaniques des pièces moulées est de réduire la taille moyenne des grains. L'utilisation des effets de la vibration du moule lors de la solidification permet d'agir en ce sens, soit sur l'affinage des grains. La présente étude porte donc sur l'affinage des grains par vibro-solidification d' alliages binaires Al-Mg. Les vibrations sont transmises au moule à l'aide d'une poutre d'acier vibrant à sa propre fréquence de résonance. Cinq alliages avec des teneurs en magnésium comprises entre 0% et 12,90/0 poids, ont été moulés dans un moule préchauffé à des températures variant entre 200°C et 400°C. Pour chacune des conditions de moulage avec et sans vibration, la microstructure des pièces moulées et le degré de remplissage du moule ont été caractérisés. Les résultats obtenus montrent que la vibro-solidification ne contribue pas de façon significative à l'affinage de la structure granulaire des alliages étudiés, mais contribue à un degré supérieur de remplissage des moules. Le taux de refroidissement en surface et au coeur des pièces moulées n'est pas influencé significativement par les vibrations. Par contre, la présence de vibrations lors de la coulée apporte une plus grande uniformité dans les résultats obtenus. Finalement, une augmentation de la teneur en Mg de 0 à 12,9% dans l'alliage contribue à réduire la taille moyenne des grains d'environ 26 % dans les pièces vibrées comparativement à environ 23 % dans les pièces non vibrées. De plus, les pièces solidifiées avec vibrations montrent un fini de surface plus rugueux et des bavures plus apparentes sur le pourtour des pièces moulées à cause d'un accroissement de la fluidité de l'alliage.
Publisher:
ISBN:
Category : Aluminum-magnesium alloys
Languages : fr
Pages : 0
Book Description
L'une des façons d' augmenter les performances mécaniques des pièces moulées est de réduire la taille moyenne des grains. L'utilisation des effets de la vibration du moule lors de la solidification permet d'agir en ce sens, soit sur l'affinage des grains. La présente étude porte donc sur l'affinage des grains par vibro-solidification d' alliages binaires Al-Mg. Les vibrations sont transmises au moule à l'aide d'une poutre d'acier vibrant à sa propre fréquence de résonance. Cinq alliages avec des teneurs en magnésium comprises entre 0% et 12,90/0 poids, ont été moulés dans un moule préchauffé à des températures variant entre 200°C et 400°C. Pour chacune des conditions de moulage avec et sans vibration, la microstructure des pièces moulées et le degré de remplissage du moule ont été caractérisés. Les résultats obtenus montrent que la vibro-solidification ne contribue pas de façon significative à l'affinage de la structure granulaire des alliages étudiés, mais contribue à un degré supérieur de remplissage des moules. Le taux de refroidissement en surface et au coeur des pièces moulées n'est pas influencé significativement par les vibrations. Par contre, la présence de vibrations lors de la coulée apporte une plus grande uniformité dans les résultats obtenus. Finalement, une augmentation de la teneur en Mg de 0 à 12,9% dans l'alliage contribue à réduire la taille moyenne des grains d'environ 26 % dans les pièces vibrées comparativement à environ 23 % dans les pièces non vibrées. De plus, les pièces solidifiées avec vibrations montrent un fini de surface plus rugueux et des bavures plus apparentes sur le pourtour des pièces moulées à cause d'un accroissement de la fluidité de l'alliage.