ICP Design Methods for Driven Piles in Sands and Clays PDF Download

Author: Richard Jardine
Publisher: Thomas Telford Limited
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 120

View

Book Description
Broadening the recommendations published by Jardine and Chow in 1996, this volume provides procedures that can be applied by geotechnical engineers, supported by worked examples for sands and clays. It also offers guidance on application to a range of pile types, geotechnical profiles and loading conditions.

Author: Vaughan Meyer
Publisher: CRC Press
ISBN: 131567551X
Category : Technology & Engineering
Languages : en
Pages : 1422

View

Book Description
Frontiers in Offshore Geotechnics III comprises the contributions presented at the Third International Symposium on Frontiers in Offshore Geotechnics (ISFOG, Oslo, Norway, 10-12 June 2015), organised by the Norwegian Geotechnical Institute (NGI). The papers address current and emerging geotechnical engineering challenges facing those working in off

Author: Susan Gourvenec
Publisher: CRC Press
ISBN: 0203830075
Category : Technology & Engineering
Languages : en
Pages : 940

View

Book Description
Frontiers in Offshore Geotechnics II comprises the Proceedings of the Second International Symposium on Frontiers in Offshore Geotechnics (ISFOG), organised by the Centre for Offshore Foundation Systems (COFS) and held at the University of Western Australia (UWA), Perth from 8 10 November 2010. The volume addresses current and emerging challenges

Author: Susan Gourvenec
Publisher: CRC Press
ISBN: 0415889340
Category : Technology & Engineering
Languages : en
Pages : 1130

View

Book Description
This book addresses current and emerging challenges facing those working in offshore construction, design and research. Keynote papers from leading industry practitioners and academics provide a comprehensive overview of central topics covering deepwater anchoring, pipelines, foundation solutions for offshore wind turbines, site investigation, geoh

Author: J. David Frost
Publisher: IOS Press
ISBN: 1607504901
Category : Science
Languages : en
Pages : 168

View

Book Description
Interfaces exist in every geotechnical system in many forms and at multiple scales. Although historically, they are often considered to be the weak link in a system, particularly as the result of a number of unexpected catastrophic failures, new insight gained over the past twenty years by researchers around the world has shown that it is possible to select combinations of materials and design an engineered interface so that it is at least as strong as the surrounding materials. These new insights have been gained as a result of experimental study, numerical modeling and analytical investigation of successful and failed systems. While individual technical papers have been presented and/or published in various forums and proceedings over the years, no technical event has ever been convened for the sole purpose of allowing for exchange of information and ideas pertaining to geotechnical interfaces. The research symposium held in September 2008 in Atlanta Georgia, USA, in conjunction with the Fourth International Symposium on Deformation Characteristics of Geomaterials (IS Atlanta 2008) at the Georgia Institute of Technology on The Characterization and Behavior of Interfaces addressed this deficiency and the papers presented at that event are contained in this publication. IOS Press is an international science, technical and medical publisher of high-quality books for academics, scientists, and professionals in all fields. Some of the areas we publish in: -Biomedicine -Oncology -Artificial intelligence -Databases and information systems -Maritime engineering -Nanotechnology -Geoengineering -All aspects of physics -E-governance -E-commerce -The knowledge economy -Urban studies -Arms control -Understanding and responding to terrorism -Medical informatics -Computer Sciences

Author: António S. Cardoso
Publisher: CRC Press
ISBN: 1351003607
Category : Technology & Engineering
Languages : en
Pages : 2430

View

Book Description
Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.

Author: Michael Tomlinson
Publisher: CRC Press
ISBN: 1466592648
Category : Technology & Engineering
Languages : en
Pages : 597

View

Book Description
Written to Eurocode 7 and the UK National AnnexUpdated to reflect the current usage of Eurocode 7, along with relevant parts of the British Standards, Pile Design and Construction Practice, Sixth Edition maintains the empirical correlations of the original-combining practical know how with scientific knowledge-and emphasizing relevant principles an

Author: Mark Randolph
Publisher: CRC Press
ISBN: 1351988913
Category : Technology & Engineering
Languages : en
Pages : 560

View

Book Description
Design practice in offshore geotechnical engineering has grown out of onshore practice, but the two application areas have tended to diverge over the last thirty years, driven partly by the scale of the foundation and anchoring elements used offshore, and partly by fundamental differences in construction and installation techniques. As a consequence offshore geotechnical engineering has grown as a speciality. The structure of Offshore Geotechnical Engineering follows a pattern that mimics the flow of a typical offshore project. In the early chapters it provides a brief overview of the marine environment, offshore site investigation techniques and interpretation of soil behaviour. It proceeds to cover geotechnical design of piled foundations, shallow foundations and anchoring systems. Three topics are then covered which require a more multi-disciplinary approach: the design of mobile drilling rigs, pipelines and geohazards. This book serves as a framework for undergraduate and postgraduate courses, and will appeal to professional engineers specialising in the offshore industry.

Author: Andrew McNamara
Publisher: CRC Press
ISBN: 0429797621
Category : Technology & Engineering
Languages : en
Pages : 708

View

Book Description
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.

Author: Chong Tang
Publisher: CRC Press
ISBN: 0429658397
Category : Technology & Engineering
Languages : en
Pages : 589

View

Book Description
Model Uncertainties in Foundation Design is unique in the compilation of the largest and the most diverse load test databases to date, covering many foundation types (shallow foundations, spudcans, driven piles, drilled shafts, rock sockets and helical piles) and a wide range of ground conditions (soil to soft rock). All databases with names prefixed by NUS are available upon request. This book presents a comprehensive evaluation of the model factor mean (bias) and coefficient of variation (COV) for ultimate and serviceability limit state based on these databases. These statistics can be used directly for AASHTO LRFD calibration. Besides load test databases, performance databases for other geo-structures and their model factor statistics are provided. Based on this extensive literature survey, a practical three-tier scheme for classifying the model uncertainty of geo-structures according to the model factor mean and COV is proposed. This empirically grounded scheme can underpin the calibration of resistance factors as a function of the degree of understanding – a concept already adopted in the Canadian Highway Bridge Design Code and being considered for the new draft for Eurocode 7 Part 1 (EN 1997-1:202x). The helical pile research in Chapter 7 was recognised by the 2020 ASCE Norman Medal.