Author: Masaaki UchidaPublisher:
ISBN:
Category :
Languages : en
Pages : 32
Book Description
Hydrogen Absorption by Zirconium Alloy Cladding Tube with Surface Oxide Film
Author: Masaaki UchidaScientific and Technical Aerospace Reports
Author: Oxidation and the Testing of Turbine Oils
Author: Cyril A. MigdalPublisher: ASTM International
ISBN: 0803134932
Category : Antioxidants
Languages : en
Pages : 929
Book Description
This work presents papers from a December 2005 symposium held in Norfolk, Virginia, and sponsored by ASTM Committee D2 on Petroleum Products and Lubricants and its Subcommittees D02.09 on Oxidation and D02.C0 on Turbine Oils. Contributors include equipment manufacturers, end users, lubricant producers, lubricant additive suppliers, test equipment manufacturers, and standard test method developers. They share information on industry trends, evolving technologies, and changing equipment designs and operating conditions, with a focus on how these factors impact oxidation. Some topics covered include turbine oil performance limits, a new form of the rotating pressure vessel oxidation test, and degradation mechanisms leading to sludge and varnish in modern turbine oil formulations. B&w photos are included. There is no subject index. Migdal is affiliated with Chemtura Corporation.
Hydrogen Absorption Mechanism of Zirconium Alloys Based on Characterization of Oxide Layer
Author: K. UnePublisher:
ISBN:
Category : Alloy elements
Languages : en
Pages : 21
Book Description
Hydrogen Absorption in Zircaloy During Aqueous Corrosion
Author: E. HillnerHydrogen Pickup During Corrosion of Zirconium Alloys
Author: Warren E. BerryPublisher:
ISBN:
Category : Zirconium alloys
Languages : en
Pages : 24
Book Description
A Study of the Hydrogen Uptake Mechanism in Zirconium Alloys
Author: MB. ElmoselhiPublisher:
ISBN:
Category : Hydrogen diffusion
Languages : en
Pages : 18
Book Description
Hydrogen uptake in zirconium alloy CANDU (CANada Deuterium Uranium) pressure tubes and other core components is controlled by the rate of transport of atomic/ionic species across the oxide film. The importance of understanding the mechanism of transport stems from the need to predict and control the rate of uptake. Samples of Zr-2.5Nb and Zircaloy-2 were prefilmed in steam (H2O, 400°C at 2 MPa) and subsequently exposed to D2O (10-3 Pa to 18 MPa) and D2 (10-3 Pa) at a temperature range of 250 to 380°C in the laboratory. Samples from Zr-2.5Nb pressure tubes removed from CANDU power reactors were also examined. Hydrogen mobility in oxides was investigated by secondary ion mass spectroscopy (SIMS) following these exposures. Diffusional-type through-oxide-thickness deuterium profiles have been observed adjacent to the oxide-metal interface for samples exposed to environments containing D2O for 4 h out-reactor and up to 10 years in-reactor. These profiles probably represent the density of accessible sites on surfaces of intergranular porosity through-thickness. Although, in small regions observed by transmission electron microscopy (TEM) such porosity has not been found. Nevertheless, from observations of grain size, sufficient sites would be available to produce deuterium concentration observed near oxide surfaces. The observed deuterium concentration profiles appear to result predominantly from deuteroxyl groups bonded to such sites. Deuterium content at the oxide-metal interface provides an indication of the extent of interfacial intergranular porosity. High deuterium contents at the interface may imply local regions with absent oxide barrier at the interface. In the presence of sufficient D2O, the oxide is continually healed, and deuterium uptake is relatively low where short-circuit routes such as intermetallics in Zircaloy-2 are not present. In environments with relatively high D2:D2O ratios, deuterium atoms may diffuse through the oxide to the interface and react directly with the metal resulting in high deuterium uptake rates. It is proposed that observed deuterium profiles may be the sum of mainly two components. The predominant component is due to deuteroxyl groups residing on accessible sites on surfaces of intergranular porosity with no direct link to hydrogen uptake by the bulk alloy. The second masked component would be due to another mobile hydrogen species (for example, H) that is diffusing to the bulk alloy. Further work is needed to substantiate the proposed hypothesis that would include exposures with varying D2:D2O ratios and further TEM examination.
Corrosion Protection and Control Using Nanomaterials
Author: V S SajiPublisher: Elsevier
ISBN: 0857095803
Category : Technology & Engineering
Languages : en
Pages : 421
Book Description
Corrosion is an expensive and potentially dangerous problem in many industries. The potential application of different nanostructured materials in corrosion protection, prevention and control is a subject of increasing interest. Corrosion protection and control using nanomaterials explores the potential use of nanotechnology in corrosion control.The book is divided into two parts. Part one looks at the fundamentals of corrosion behaviour and the manufacture of nanocrystalline materials. Chapters discuss the impact of nanotechnology in reducing corrosion cost, and investigate the influence of various factors including thermodynamics, kinetics and grain size on the corrosion behaviour of nanocrystalline materials. There are also chapters on electrodeposition and the corrosion behaviour of electrodeposited nanocrystalline materials. Part two provides a series of case studies of applications of nanomaterials in corrosion control. Chapters review oxidation protection using nanocrystalline structures at various temperatures, sol- gel and self-healing nanocoatings and the use of nanoreservoirs and polymer nanocomposites in corrosion control.With its distinguished editors and international team of expert contributors, Corrosion protection and control using nanomaterials is an invaluable reference tool for researchers and engineers working with nanomaterials in a variety of industries including, aerospace, automotive and chemical engineering as well as academics studying the unique protection and control offered by nanomaterials against corrosion. - Explores the potential use of nanotechnology and nanomaterials for corrosion prevention, protection and control - Discusses the impact of nanotechnology in reducing corrosion cost and investigates various factors on the corrosion behaviour of nanocrystalline materials - Provides a series of case studies and applications of nanomaterials for corrosion control
Hydrogen Permeation of Oxide Films on Zirconium
Author: Tennyson SmithPublisher:
ISBN:
Category : Oxide coating
Languages : en
Pages : 76
Book Description
Author: