Author: Joseph M. Marshall
Publisher: Springer Science & Business Media
ISBN: 9401006326
Category : Technology & Engineering
Languages : en
Pages : 361
Book Description
The primary objective of this NATO Advanced Study Institute (ASI) was to present an up-to-date overview of various current areas of interest in the field of photovoltaic and related photoactive materials. This is a wide-ranging subject area, of significant commercial and environmental interest, and involves major contributions from the disciplines of physics, chemistry, materials, electrical and instrumentation engineering, commercial realisation etc. Therefore, we sought to adopt an inter disciplinary approach, bringing together recognised experts in the various fields while retaining a level of treatment accessible to those active in specific individual areas of research and development. The lecture programme commenced with overviews of the present relevance and historical development of the subject area, plus an introduction to various underlying physical principles of importance to the materials and devices to be addressed in later lectures. Building upon this, the ASI then progressed to more detailed aspects of the subject area. We were also fortunately able to obtain a contribution from Thierry Langlois d'Estaintot of the European Commission Directorate, describing present and future EC support for activities in this field. In addition, poster sessions were held throughout the meeting, to allow participants to present and discuss their current activities. These were supported by what proved to be very effective feedback sessions (special thanks to Martin Stutzmann), prior to which groups of participants enthusiastically met (often in the bar) to identify and agree topics of common interest.
Photovoltaic and Photoactive Materials
Author: Joseph M. Marshall
Publisher: Springer Science & Business Media
ISBN: 9401006326
Category : Technology & Engineering
Languages : en
Pages : 361
Book Description
The primary objective of this NATO Advanced Study Institute (ASI) was to present an up-to-date overview of various current areas of interest in the field of photovoltaic and related photoactive materials. This is a wide-ranging subject area, of significant commercial and environmental interest, and involves major contributions from the disciplines of physics, chemistry, materials, electrical and instrumentation engineering, commercial realisation etc. Therefore, we sought to adopt an inter disciplinary approach, bringing together recognised experts in the various fields while retaining a level of treatment accessible to those active in specific individual areas of research and development. The lecture programme commenced with overviews of the present relevance and historical development of the subject area, plus an introduction to various underlying physical principles of importance to the materials and devices to be addressed in later lectures. Building upon this, the ASI then progressed to more detailed aspects of the subject area. We were also fortunately able to obtain a contribution from Thierry Langlois d'Estaintot of the European Commission Directorate, describing present and future EC support for activities in this field. In addition, poster sessions were held throughout the meeting, to allow participants to present and discuss their current activities. These were supported by what proved to be very effective feedback sessions (special thanks to Martin Stutzmann), prior to which groups of participants enthusiastically met (often in the bar) to identify and agree topics of common interest.
Publisher: Springer Science & Business Media
ISBN: 9401006326
Category : Technology & Engineering
Languages : en
Pages : 361
Book Description
The primary objective of this NATO Advanced Study Institute (ASI) was to present an up-to-date overview of various current areas of interest in the field of photovoltaic and related photoactive materials. This is a wide-ranging subject area, of significant commercial and environmental interest, and involves major contributions from the disciplines of physics, chemistry, materials, electrical and instrumentation engineering, commercial realisation etc. Therefore, we sought to adopt an inter disciplinary approach, bringing together recognised experts in the various fields while retaining a level of treatment accessible to those active in specific individual areas of research and development. The lecture programme commenced with overviews of the present relevance and historical development of the subject area, plus an introduction to various underlying physical principles of importance to the materials and devices to be addressed in later lectures. Building upon this, the ASI then progressed to more detailed aspects of the subject area. We were also fortunately able to obtain a contribution from Thierry Langlois d'Estaintot of the European Commission Directorate, describing present and future EC support for activities in this field. In addition, poster sessions were held throughout the meeting, to allow participants to present and discuss their current activities. These were supported by what proved to be very effective feedback sessions (special thanks to Martin Stutzmann), prior to which groups of participants enthusiastically met (often in the bar) to identify and agree topics of common interest.
Carbon Nanotubes
Author: Ajay Kumar Mishra
Publisher: Nova Science Publishers
ISBN: 9781620819142
Category : Carbon
Languages : en
Pages : 0
Book Description
Carbon nanotubes possess unusual fascinating properties which have attracted the scientific world. This book covers a very wide domain of research and development where the synthesis and properties of carbon nanotubes are discussed. This book describes the carbon nanotube general introduction, various synthesis procedures and properties. This book is going to be beneficial to the researchers who are working for their postgraduate degree in nanomaterials and nanotechnology. This book also provides a platform for all the academics and researchers as it covers a vast background for the recent literature, abbreviations, and summaries. This book will be worth reading for the researchers who are more interested in the general overview of carbon nanotubes, fundamentals concepts and various synthetic procedures in the multidisciplinary areas. This book contains the fundamental knowledge with the recent advancements for the research and development in the field of nanomaterials and nanotechnology.
Publisher: Nova Science Publishers
ISBN: 9781620819142
Category : Carbon
Languages : en
Pages : 0
Book Description
Carbon nanotubes possess unusual fascinating properties which have attracted the scientific world. This book covers a very wide domain of research and development where the synthesis and properties of carbon nanotubes are discussed. This book describes the carbon nanotube general introduction, various synthesis procedures and properties. This book is going to be beneficial to the researchers who are working for their postgraduate degree in nanomaterials and nanotechnology. This book also provides a platform for all the academics and researchers as it covers a vast background for the recent literature, abbreviations, and summaries. This book will be worth reading for the researchers who are more interested in the general overview of carbon nanotubes, fundamentals concepts and various synthetic procedures in the multidisciplinary areas. This book contains the fundamental knowledge with the recent advancements for the research and development in the field of nanomaterials and nanotechnology.
International Aerospace Abstracts
Clean Electricity From Photovoltaics
Author: Mary D Archer
Publisher: World Scientific
ISBN: 1783262052
Category : Medical
Languages : en
Pages : 870
Book Description
Photovoltaic cells provide clean, reversible electrical power from the sun. Made from semiconductors, they are durable, silent in operation and free of polluting emissions. In this book, experts from all sectors of the PV community — materials scientists, physicists, production engineers, economists and environmentalists — give their critical appraisals of where the technology is now and what its prospects are./a
Publisher: World Scientific
ISBN: 1783262052
Category : Medical
Languages : en
Pages : 870
Book Description
Photovoltaic cells provide clean, reversible electrical power from the sun. Made from semiconductors, they are durable, silent in operation and free of polluting emissions. In this book, experts from all sectors of the PV community — materials scientists, physicists, production engineers, economists and environmentalists — give their critical appraisals of where the technology is now and what its prospects are./a
Nanotechnology-Enabled Sensors
Author: Kourosh Kalantar-zadeh
Publisher: Springer Science & Business Media
ISBN: 0387680233
Category : Technology & Engineering
Languages : en
Pages : 502
Book Description
Nanotechnology provides tools for creating functional materials, devices, and systems by controlling materials at the atomic and molecular scales and making use of novel properties and phenomena. Nanotechnology-enabled sensors find applications in several fields such as health and safety, medicine, process control and diagnostics. This book provides the reader with information on how nanotechnology enabled sensors are currently being used and how they will be used in the future in such diverse fields as communications, building and facilities, medicine, safety, and security, including both homeland defense and military operations.
Publisher: Springer Science & Business Media
ISBN: 0387680233
Category : Technology & Engineering
Languages : en
Pages : 502
Book Description
Nanotechnology provides tools for creating functional materials, devices, and systems by controlling materials at the atomic and molecular scales and making use of novel properties and phenomena. Nanotechnology-enabled sensors find applications in several fields such as health and safety, medicine, process control and diagnostics. This book provides the reader with information on how nanotechnology enabled sensors are currently being used and how they will be used in the future in such diverse fields as communications, building and facilities, medicine, safety, and security, including both homeland defense and military operations.
Disordered Materials
Author: Stadford R. Ovshinsky
Publisher: Springer Science & Business Media
ISBN: 1468487450
Category : Science
Languages : en
Pages : 404
Book Description
Landmark contributions to science and mechanisms for the origin of the phenomena, and technology are rarely recognized at the time of reached important conclusions about the physical publication. Few people, even in technical areas, nature of the materials at equilibrium and their recogni zed the importance of developments such as electronic nonequilibrium properties. Many of these the transistor, the laser, or electrophotography ideas were condensed into a publication for Physical until well after their successful demonstration. Review Letters, paper 1 in this collection. This So-called experts, in fact, tend to resist new paper immediately attracted attention to the field, inventions, a natural instinct based on a combina and directly lead to the initiation of large research tion of fear of obsolescent expertise and jealousy efforts at both industrial laboratories and univer- arising from lack of active participation in the ties throughout the world. Inevitably, there was discovery. the usual amount of controversy, with many experts Denigration of new ideas is a relatively simultaneously taking positions (2) and (3) above. safe modus operandi, since the vast majority It has now been well over 20 years since eventually are abandoned well short of commerciality. the original publication date, and an objective view However, a successful device can be identified by can be taken in hindsight.
Publisher: Springer Science & Business Media
ISBN: 1468487450
Category : Science
Languages : en
Pages : 404
Book Description
Landmark contributions to science and mechanisms for the origin of the phenomena, and technology are rarely recognized at the time of reached important conclusions about the physical publication. Few people, even in technical areas, nature of the materials at equilibrium and their recogni zed the importance of developments such as electronic nonequilibrium properties. Many of these the transistor, the laser, or electrophotography ideas were condensed into a publication for Physical until well after their successful demonstration. Review Letters, paper 1 in this collection. This So-called experts, in fact, tend to resist new paper immediately attracted attention to the field, inventions, a natural instinct based on a combina and directly lead to the initiation of large research tion of fear of obsolescent expertise and jealousy efforts at both industrial laboratories and univer- arising from lack of active participation in the ties throughout the world. Inevitably, there was discovery. the usual amount of controversy, with many experts Denigration of new ideas is a relatively simultaneously taking positions (2) and (3) above. safe modus operandi, since the vast majority It has now been well over 20 years since eventually are abandoned well short of commerciality. the original publication date, and an objective view However, a successful device can be identified by can be taken in hindsight.
Proceedings of the 2nd International Conference on Electronic Engineering and Renewable Energy Systems
Author: Bekkay Hajji
Publisher: Springer Nature
ISBN: 9811562598
Category : Technology & Engineering
Languages : en
Pages : 858
Book Description
This book includes papers presented at the Second International Conference on Electronic Engineering and Renewable Energy (ICEERE 2020), which focus on the application of artificial intelligence techniques, emerging technology and the Internet of things in electrical and renewable energy systems, including hybrid systems, micro-grids, networking, smart health applications, smart grid, mechatronics and electric vehicles. It particularly focuses on new renewable energy technologies for agricultural and rural areas to promote the development of the Euro-Mediterranean region. Given its scope, the book is of interest to graduate students, researchers and practicing engineers working in the fields of electronic engineering and renewable energy.
Publisher: Springer Nature
ISBN: 9811562598
Category : Technology & Engineering
Languages : en
Pages : 858
Book Description
This book includes papers presented at the Second International Conference on Electronic Engineering and Renewable Energy (ICEERE 2020), which focus on the application of artificial intelligence techniques, emerging technology and the Internet of things in electrical and renewable energy systems, including hybrid systems, micro-grids, networking, smart health applications, smart grid, mechatronics and electric vehicles. It particularly focuses on new renewable energy technologies for agricultural and rural areas to promote the development of the Euro-Mediterranean region. Given its scope, the book is of interest to graduate students, researchers and practicing engineers working in the fields of electronic engineering and renewable energy.
Physics and Technology of Silicon Carbide Devices
Author: George Gibbs
Publisher:
ISBN: 9781681176437
Category :
Languages : en
Pages : 284
Book Description
Silicon (Si) is by far the most widely used semiconductor material for power devices. On the other hand, Si-based power devices are approaching their material limits, which has provoked a lot of efforts to find alternatives to Si-based power devices for better performance. With the rapid innovations and developments in the semiconductor industry, Silicon Carbide (SiC) power devices have progressed from immature prototypes in laboratories to a viable alternative to Si-based power devices in high-efficiency and high-power density applications. SiC devices have numerous persuasive advantages--high-breakdown voltage, high-operating electric field, high-operating temperature, high-switching frequency and low losses. Silicon Carbide (SiC) devices belong to the so-called wide band gap semiconductor group, which offers a number of attractive characteristics for high voltage power semiconductors when compared to commonly used silicon (Si). Recently, some SiC power devices, for example, Schottky-barrier diodes (SBDs), metal-oxide-semiconductor field-effecttransistors (MOSFETs), junction FETs (JFETs), and their integrated modules have come onto the market. Physics and Technology of Silicon Carbide Devices abundantly describes recent technologies on manufacturing, processing, characterization, modeling, etc. for SiC devices.
Publisher:
ISBN: 9781681176437
Category :
Languages : en
Pages : 284
Book Description
Silicon (Si) is by far the most widely used semiconductor material for power devices. On the other hand, Si-based power devices are approaching their material limits, which has provoked a lot of efforts to find alternatives to Si-based power devices for better performance. With the rapid innovations and developments in the semiconductor industry, Silicon Carbide (SiC) power devices have progressed from immature prototypes in laboratories to a viable alternative to Si-based power devices in high-efficiency and high-power density applications. SiC devices have numerous persuasive advantages--high-breakdown voltage, high-operating electric field, high-operating temperature, high-switching frequency and low losses. Silicon Carbide (SiC) devices belong to the so-called wide band gap semiconductor group, which offers a number of attractive characteristics for high voltage power semiconductors when compared to commonly used silicon (Si). Recently, some SiC power devices, for example, Schottky-barrier diodes (SBDs), metal-oxide-semiconductor field-effecttransistors (MOSFETs), junction FETs (JFETs), and their integrated modules have come onto the market. Physics and Technology of Silicon Carbide Devices abundantly describes recent technologies on manufacturing, processing, characterization, modeling, etc. for SiC devices.
Ceramic Coatings
Author: Feng Shi
Publisher: BoD – Books on Demand
ISBN: 9535100831
Category : Technology & Engineering
Languages : en
Pages : 300
Book Description
The main target of this book is to state the latest advancement in ceramic coatings technology in various industrial fields. The book includes topics related to the applications of ceramic coating covers in enginnering, including fabrication route (electrophoretic deposition and physical deposition) and applications in turbine parts, internal combustion engine, pigment, foundry, etc.
Publisher: BoD – Books on Demand
ISBN: 9535100831
Category : Technology & Engineering
Languages : en
Pages : 300
Book Description
The main target of this book is to state the latest advancement in ceramic coatings technology in various industrial fields. The book includes topics related to the applications of ceramic coating covers in enginnering, including fabrication route (electrophoretic deposition and physical deposition) and applications in turbine parts, internal combustion engine, pigment, foundry, etc.
Thin-Film Silicon Solar Cells
Author: Arvind Shah
Publisher: EPFL Press
ISBN: 9781420066746
Category : Technology & Engineering
Languages : en
Pages : 472
Book Description
Photovoltaic technology has now developed to the extent that it is close to fulfilling the vision of a "solar-energy world," as devices based on this technology are becoming efficient, low-cost and durable. This book provides a comprehensive treatment of thin-film silicon, a prevalent PV material, in terms of its semiconductor nature, starting out with the physical properties, but concentrating on device applications. A special emphasis is given to amorphous silicon and microcrystalline silicon as photovoltaic materials, along with a model that allows these systems to be physically described in the simplest manner possible, thus allowing the student or scientist/engineer entering the field of thin-film electronics to master a few basic concepts that are distinct from those in the field of conventional semiconductors. The main part of the book deals with solar cells and modules by illustrating the basic functioning of these devices, along with their limitations, design optimization, testing and fabrication methods. Among the manufacturing processes discussed are plasma-assisted and hot-wire deposition, sputtering, and structuring techniques.
Publisher: EPFL Press
ISBN: 9781420066746
Category : Technology & Engineering
Languages : en
Pages : 472
Book Description
Photovoltaic technology has now developed to the extent that it is close to fulfilling the vision of a "solar-energy world," as devices based on this technology are becoming efficient, low-cost and durable. This book provides a comprehensive treatment of thin-film silicon, a prevalent PV material, in terms of its semiconductor nature, starting out with the physical properties, but concentrating on device applications. A special emphasis is given to amorphous silicon and microcrystalline silicon as photovoltaic materials, along with a model that allows these systems to be physically described in the simplest manner possible, thus allowing the student or scientist/engineer entering the field of thin-film electronics to master a few basic concepts that are distinct from those in the field of conventional semiconductors. The main part of the book deals with solar cells and modules by illustrating the basic functioning of these devices, along with their limitations, design optimization, testing and fabrication methods. Among the manufacturing processes discussed are plasma-assisted and hot-wire deposition, sputtering, and structuring techniques.