Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Heterogeneous Catalysis and Fine Chemicals IV (Volume 108).
Author: Heterogeneous Catalysis and Fine Chemicals IV
Author: H.U. BlaserPublisher: Elsevier
ISBN: 0080533930
Category : Technology & Engineering
Languages : en
Pages : 693
Book Description
After three meetings in Poitiers, France, the 4th International Symposium on Heterogeneous Catalysis and Fine Chemicals was held under the auspices of the New Swiss Chemical Society in Basel, Switzerland. Fundamental as well as applied contributions on the use of heterogeneous catalysis for the preparation of fine chemicals were presented and discussed.The program consisted of 4 plenary lectures, 28 oral contributions and around 90 posters covering a broad range of reactions and catalytic aspects. 82 of these contributions are collected in the present proceedings, grouped into the following 8 topical areas:- Industrial and engineering problems (7 contributions)- Alkylation and acylation reactions (11 contributions)- Enantio- and diastereoselective hydrogenation reactions (9 contributions)- Chemoselective hydrogenation reactions (12 contributions)- Oxidation reactions (14 contributions)- Immobilized and encapsulated complex catalysts (12 contributions)- Zeolite and clay catalysts (12 contributions)- Miscellaneous topics (5 contributions)
Experiments in Catalytic Reaction Engineering
Author: J.M. BertyPublisher: Elsevier
ISBN: 0080531423
Category : Technology & Engineering
Languages : en
Pages : 289
Book Description
The science of catalytic reaction engineering studies the catalyst and the catalytic process in the laboratory in order to predict how they will perform in production-scale reactors. Surprises are to be avoided in the scaleup of industrial processes. The laboratory results must account for flow, heat and mass transfer influences on reaction rate to be useful for scaleup. Calculated performance based on these results must also be useful to maximization of profit and safety and minimization of pollution. To this end, information on products as well as byproducts and heat produced must be generated. If a sufficiently large database of knowledge is produced, optimization studies will be possible later if economic conditions change.The field of reaction engineering required new tools. For kinetic and catalyst testing, the most successful of these tools was the internal recycle reactor. Studies in recycle reactors can be made under well-defined conditions of flow and associated transfer processes, and close to commercial operation. The recycle reactor eliminates or minimizes the effect of transfer process, and allows the remaining ones to be known.Features of this book:• Provides insight into a field that is neither well understood nor properly appreciated.• Gives a deeper understanding of reaction engineering practice.• Helps avoid frustration and disappointment in industrial research. This book is short and clear enough to assist all members of the R&D and Engineering team, whether reaction engineers, or specialists in other fields. This is critical in this new age of computation and communication, when team members must each know at least something of their colleagues' fields. Additionally, many scientists in more exploratory or fundamental fields can use recycle reactors to study basic phenomena free of transfer interactions.
Proceedings of the International Conference on Colloid and Surface Science
Author: Y. IwasawaPublisher: Elsevier
ISBN: 0080529356
Category : Science
Languages : en
Pages : 1129
Book Description
The purpose of this Conference was to discuss the results of recent developments and the future prospect in science and technology of the field. The field has been growing and flourishing, while indicating many problems to be uncovered and solved. The conference was structured to encourage interaction and to stimulate the exchange of ideas to accomplish the above purpose.Key issues and materials related to the Conference were included as follows: • Molecular Assemblies in Solutions; • Fine Particles and Colloidal Dispersions; • Supramolecular Organized Films; • Nanostructural Solid Surfaces; • Industrial Applications and Products.The Conference comprised 2 plenary lectures, 42 invited lectures, 150 oral presentations and 266 poster presentations.
Biocatalysis in Oil Refining
Author: Publisher: Elsevier
ISBN: 0080545122
Category : Technology & Engineering
Languages : en
Pages : 437
Book Description
Biocatalysis in Oil Refining focuses on petroleum refining bioprocesses, establishing a connection between science and technology.The micro organisms and biomolecules examined for biocatalytic purposes for oil refining processes are thoroughly detailed. Terminology used by biologists, chemists and engineers is brought into a common language, aiding the understanding of complex biological-chemical-engineering issues. Problems to be addressed by the future R&D activities and by new technologies are described and summarized in the last chapter. * Updated references * Studying bioprocessing problems, looking at opportunities for improvements and technology developments
Catalysis and Automotive Pollution Control IV
Author: N. KrusePublisher: Elsevier
ISBN: 0080528619
Category : Technology & Engineering
Languages : en
Pages : 719
Book Description
In spite of the energy crises and the recession, there has been a global, explosive growth in the amount of motor vehicles. In the past 50 years, the amount has increased from 50 to 700 million vehicles. For economical reasons they will probably continue to be used for a considerable number of years, despite the poor yield of internal combustion engines resulting in the inevitable production of some gaseous pollutants. The subsequent increase of gaseous pollutants in our atmosphere caused by exhaust gas from automobiles has enhanced the problem of the elimination of these pollutants produced by internal combustion engines. Catalysis has proven to be the best solution to lower the content of exhaust gas in pollutants.As its predecessors, CAPoC4 proved to be a suitable platform for discussing technological improvements and developments along with future perspectives and challenges. In the light of new results and further legislative regulations, the following topics were intensely discussed: *low light-off behaviour based on improved catalysts and substrate formulations *efficient adsorber systems for storage of hydrocarbon emissions *electrically heated catalyst systems ahead the main catalyst or, alternatively, close coupled catalysts (at the manifold of the engine) • lean DeNOx catalysts allowing for decomposition of NOx in the oxygen-rich exhaust of direct injection gasoline engines and high speed injection diesel engines or, alternatively, NOx trapping/reduction in a hybrid approach * collection and destruction of dry particulates or soot.There is no doubt that clean vehicle technology is a vital part of improving air quality. Challenges remain and call for technological answers. Catalytic air pollution control is still an area providing a considerable incentive for innovative work.
Oxide-based Systems at the Crossroads of Chemistry
Author: C. ColellaPublisher: Elsevier
ISBN: 0080538304
Category : Science
Languages : en
Pages : 453
Book Description
This volume includes papers presented at the second International Workshop on Oxide-based Systems at the Crossroads of Chemistry, held at Villa Olmo in Como, Italy, 8-11 October.The selected papers present the highlights of recent research in the field of oxide structure. A wide range of oxidic materials, including real oxides, zeolites and layer-structured systems, is considered and described in terms of preparation methods, structural characterization and the relation between active sites, structure and catalytic properties. The application of the most powerful simulation and physical-chemical techniques show their usefulness in discovering and explaining structural and dynamic properties of complex materials. Moreover the development of sophisticated spectroscopical and analytical techniques are shown to significantly improve the growth of surface oxide science, generating new tools for the knowledge of catalyst structure and reaction mechanisms. An interesting feature is the inclusion of papers which show the mutual roles of experiment and theoretical models.
Methods for Monitoring and Diagnosing the Efficiency of Catalytic Converters
Author: M. SiderisPublisher: Elsevier
ISBN: 0080536492
Category : Technology & Engineering
Languages : en
Pages : 465
Book Description
The dramatic evolution of catalytic converters in the last thirty years was a result of a need worldwide to reduce pollution created by the exhaust gases of internal combustion engines. Environmental concerns have led American, Japanese and European Union (EU) legislation to pose continuously stricter emission limits for petrol engines in the last decades. The catalytic converter has become the most important means of exhaust treatment to achieve the desired emission limits. The international legislation has also created a need for a regular assessment of the efficiency of the catalytic converter in order to detect a deterioration of its conversion efficiency as soon as this deterioration takes place. The assessment of conversion efficiency of a catalytic converter can take place during normal driving of a vehicle (on-board diagnosis or OBD) or in a workshop by specialized technicians. The most important methods nowadays are the OBD methods. The evolution of methods concerned with OBD and non-OBD monitoring and diagnosing of efficiency of catalytic converters of internal combustion engines is described based on patents and published patent applications. Non-patent references are also used. The basic principles of modern catalytic converters are described in an extensive Introduction, where the importance of monitoring and diagnosing the efficiency of catalytic converters is demonstrated. The book is divided into four parts. The first part describes methods involving the use of oxygen or air/fuel exhaust gas sensors to determine the oxygen storage capacity of a catalytic converter. The second part describes methods involving the use of temperature sensors to determine the exothermic reaction capacity of a catalytic converter. The third part describes all other methods existing in patent literature that monitor and diagnose the efficiency of catalytic converters. The great majority of the methods of the third part involves exhaust gas concentration measurements. The fourth part comprises a general discussion of all methods described. In the beginning of each part, a short introduction is given to explain the problem that the methods attempt to solve. The methods in each part are presented in chronological order per patent applicant. This helps to evaluate how the patent applicant has improved his methods over time. A patent number index with information about the patent applicants, inventors, priorities and patent-families, an inventor index, a company index and a subject index can be found at the end of the book.
Alkene Polymerization Reactions with Transition Metal Catalysts
Author: Yury KissinPublisher: Elsevier
ISBN: 0080557996
Category : Technology & Engineering
Languages : en
Pages : 607
Book Description
During the past 30 years, the field of alkene polymerization over transition metal catalysts underwent several major changes:1. The list of commercial heterogeneous Ziegler-Natta catalysts for the synthesis of polyethylene and stereoregular polyolefins was completely renewed affording an unprecedented degree of control over the polymer structure.2. Research devoted to metallocene and other soluble transition-metal catalysis has vastly expanded and has shifted toward complexes of transition metals with multidentate ligands.3. Recent developments in gel permeation chromatography, temperature-rising fractionation, and crystallization fractionation provided the first reliable information about differences between various active centers in transition-metal catalysts.4. A rapid development of high-resolution 13C NMR spectroscopy resulted in greatly expanded understanding of the chemical and steric features of polyolefins and alkene copolymers. These developments require a new review of all aspects of alkene polymerization reactions with transition-metal catalysts. The first chapter in the book is an introductory text for researchers who are entering the field. It describes the basic principles of polymerization reactions with transition-metal catalysts, the types of catalysts, and commercially manufactured polyolefins. The next chapter addresses the principal issue of alkene polymerization catalysis: the existence of catalyst systems with single and multiple types of active centers. The subsequent chapters are devoted to chemistry and stereochemistry of elemental reaction steps, structures of catalyst precursors and reactions leading to the formation of active centers, kinetics of polymerization reactions, and their mechanisms.The book describes the latest commercial polymerization catalysts for the synthesis of polyethylenes and polypropylene The book provides a detailed description of the multi-center nature of commercial Ziegler-Natta catalysts. The book devotes specialized chapters to the most important aspects of transition metal polymerization catalysts: the reactions leading to the formation of active centers, the chemistry and stereochemistry of elemental polymerization steps, reaction kinetics, and the polymerization mechanism. The book contains an introductory chapter for researchers who are entering the field of polymerization catalysis. It describes the basic principles of polymerization reactions with transition-metal catalysts and the types of commercially manufactured polyolefins and copolymersThe book contains over 2000 references, the most recent up to end of 2006.
Fluid Catalytic Cracking VII:
Author: Publisher: Elsevier
ISBN: 0080548512
Category : Technology & Engineering
Languages : en
Pages : 357
Book Description
Since 1987, the Petroleum Division of the American Chemical Society (ACS) has sponsored at 3 year intervals an international symposium on fluid cracking catalysts (FCC) technology. This volume collects the recent progress of this technology as reported in the papers presented during the 232th National Meeting of the ACS in San Francisco, September 10-14, 2006.Sixty-six years after the introduction of the fluid cracking catalyst process, it remains the main process of gasoline generation for the estimated 237 millions cars on US roads. Catalysts testing and evaluation still remains a subject of interest, debate and controversy. Lambda sweep testing, testing of SOx, NOx and combustion promoters have been discussed in details together with catalyst evaluation for atmospheric residues and metal contaminated oils cracking.Of particular interest has been the introduction of novel concept in process design aimed at improving cracked product selectivity such as two-stage risers for better gasoline and olefins production and downer technology for high severity processes . The importance of solid state nuclear magnetic resonance (NMR) in the study of crude oils, catalysts and reaction products are illustrated by several examples. Two contributions describe the use of predictive methods to understand FCC aging and deactivationand personal overviews of the development of SOx and combustion promoters technology are presented.* Presents findings from the tri-annual international symposium on fluid cracking catalysts (FCC) technology, sponsored by the Petroleum Division of the American Chemical Society (ACS) * Two contributions describe the use of predictive methods to understand FCC aging and deactivation* Personal overviews by the authors of the development of SOx and combustion promoters technology