Author: Ali A. AmeriPublisher:
ISBN:
Category : Gas-turbines
Languages : en
Pages : 14
Book Description
Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine
Author: Ali A. AmeriPublisher:
ISBN:
Category : Gas-turbines
Languages : en
Pages : 14
Book Description
Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine. Part 2; Simulation Results
Author: National Aeronautics and Space Administration (NASA)Publisher: Createspace Independent Publishing Platform
ISBN: 9781721183678
Category :
Languages : en
Pages : 26
Book Description
A combined experimental and computational study has been performed to investigate the detailed distribution of convective heat transfer coefficients on the first stage blade tip surface for a geometry typical of large power generation turbines (>1OOMW). This paper is concerned with the numerical prediction of the tip surface heat transfer. Good comparison with the experimental measured distribution was achieved through accurate modeling of the most important features of the blade passage and heating arrangement as well as the details of experimental rig likely to affect the tip heat transfer. A sharp edge and a radiused edge tip were considered. The results using the radiused edge tip agreed better with the experimental data. This improved agreement was attributed to the absence of edge separation on the tip of the radiused edge blade. Ameri, A. A. and Bunker, R. S. Glenn Research Center NASA/CR-1999-209151/PT2, NAS 1.26:209151/PT2, E-11656/PT2, ASME 99-GT-283/PT2
Handbook of Turbomachinery
Author: Earl Logan, Jr.Publisher: CRC Press
ISBN: 0203911997
Category : Technology & Engineering
Languages : en
Pages : 927
Book Description
Building on the success of its predecessor, Handbook of Turbomachinery, Second Edition presents new material on advances in fluid mechanics of turbomachinery, high-speed, rotating, and transient experiments, cooling challenges for constantly increasing gas temperatures, advanced experimental heat transfer and cooling effectiveness techniques, and propagation of wake and pressure disturbances. Completely revised and updated, it offers updated chapters on compressor design, rotor dynamics, and hydraulic turbines and features six new chapters on topics such as aerodynamic instability, flutter prediction, blade modeling in steam turbines, multidisciplinary design optimization.
ASME Technical Papers
Author: Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 438
Book Description
Proceedings of the ASME Turbo Expo 2002 Presented at the 2002 ASME Turbo Expo, June 3-6, 2002, Amsterdam, the Netherlands
Author: Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 726
Book Description
Annotation This is Volume 1 of five volumes that comprise the proceedings of the June 2002 conference, sponsored by the International Gas Turbine Institute (IGTI), a technical institute of the American Society of Mechanical Engineers. The purpose of the conference was to facilitate international exchange and development of educational and technical information related to the design, application, manufacture, operation, maintenance, and environmental impact of all types of gas engines. With an emphasis upon the need for more efficient, cleaner, and more reliable gas turbines, the approximately 130 articles cover various technical aspects of aircraft engines; coal, biomass, and alternative fuels; combustion and fuels; education; electric power; and vehicular and small turbomachines. There is no subject index. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Paper
Author: Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 452
Book Description
Author: Peitong Jin
Author: 
Author: 
Author: