Guidelines for Applying Cohesive Models to the Damage Behaviour of Engineering Materials and Structures PDF Download

Author: Karl-Heinz Schwalbe
Publisher: Springer
ISBN: 9783642294952
Category : Technology & Engineering
Languages : en
Pages : 89

View

Book Description
This brief provides guidance for the application of cohesive models to determine damage and fracture in materials and structural components. This can be done for configurations with or without a pre-existing crack. Although the brief addresses structural behaviour, the methods described herein may also be applied to any deformation induced material damage and failure, e.g. those occurring during manufacturing processes. The methods described are applicable to the behaviour of ductile metallic materials and structural components made thereof. Hints are also given for applying the cohesive model to other materials.

Author: Karl-Heinz Schwalbe
Publisher: Springer Science & Business Media
ISBN: 3642294944
Category : Science
Languages : en
Pages : 97

View

Book Description
This brief provides guidance for the application of cohesive models to determine damage and fracture in materials and structural components. This can be done for configurations with or without a pre-existing crack. Although the brief addresses structural behaviour, the methods described herein may also be applied to any deformation induced material damage and failure, e.g. those occurring during manufacturing processes. The methods described are applicable to the behaviour of ductile metallic materials and structural components made thereof. Hints are also given for applying the cohesive model to other materials.

Author: Bijan Kumar Dutta
Publisher: CRC Press
ISBN: 1040216668
Category : Technology & Engineering
Languages : en
Pages : 195

View

Book Description
The small punch test (SPT) is useful to calculate changes in the tensile and fracture properties of structural materials during the service life of the materials of plant components. This book compiles advances in the development of correlations to calculate mechanical properties of the materials using SPT data. New correlations have been developed using hybrid methodology involving analytical and experimental data. The newly developed correlations have been tested conducting case studies on SPT and pre- cracked/ notched SPT (p- SPT) specimens. The eventual applications of all the new correlations have been demonstrated by conducting a real- life case study involving degradation of structural material from ductile to semi- brittle state due to aging. Features: • Presents exclusive material on the remnant life assessment of in- service materials using SPTs. • Assesses the fracture toughness of ductile materials using the experimentally measured biaxial fracture strain. • Provides new equations to calculate the yield and ultimate stresses of copper and titanium alloys using measured SPT data. • Explores functions to correlate the load- displacement data of p- SPT specimens with fracture properties. • Includes case studies with direct relevance to the degradation of plant materials. This book is aimed at researchers, professionals, and graduate students in materials science and engineering, mechanical property characterization and testing, and small- scale experimentation. It is expected that the advanced methodology presented in this book to evaluate changes in the properties of aged materials during the service life using SPT data are useful to designers for safety evaluation and also to calculate the remaining service life of industrial components for life extension studies.

Author: Günther Meschke
Publisher: CRC Press
ISBN: 100064474X
Category : Technology & Engineering
Languages : en
Pages : 1500

View

Book Description
Computational Modelling of Concrete and Concrete Structures contains the contributions to the EURO-C 2022 conference (Vienna, Austria, 23-26 May 2022). The papers review and discuss research advancements and assess the applicability and robustness of methods and models for the analysis and design of concrete, fibre-reinforced and prestressed concrete structures, as well as masonry structures. Recent developments include methods of machine learning, novel discretisation methods, probabilistic models, and consideration of a growing number of micro-structural aspects in multi-scale and multi-physics settings. In addition, trends towards the material scale with new fibres and 3D printable concretes, and life-cycle oriented models for ageing and durability of existing and new concrete infrastructure are clearly visible. Overall computational robustness of numerical predictions and mathematical rigour have further increased, accompanied by careful model validation based on respective experimental programmes. The book will serve as an important reference for both academics and professionals, stimulating new research directions in the field of computational modelling of concrete and its application to the analysis of concrete structures. EURO-C 2022 is the eighth edition of the EURO-C conference series after Innsbruck 1994, Bad Gastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018. The overarching focus of the conferences is on computational methods and numerical models for the analysis of concrete and concrete structures.

Author: K. L. Mittal
Publisher: John Wiley & Sons
ISBN: 1119526396
Category : Technology & Engineering
Languages : en
Pages : 485

View

Book Description
A solid collection of interdisciplinary review articles on the latest developments in adhesion science and adhesives technology With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. Based on the success of the preceding volumes in this series "Progress in Adhesion and Adhesives"), the present volume comprises 12 review articles published in Volume 5 (2017) of Reviews of Adhesion and Adhesives. The subject of these 12 reviews fall into the following general areas: 1. Nanoparticles in reinforced polymeric composites. 2. Wettability behavior and its modification, including superhydrophobic surfaces. 3. Ways to promote adhesion, including rubber adhesion. 4. Adhesives and adhesive joints 5. Dental adhesion. The topics covered include: Nanoparticles as interphase modifiers in fiber reinforced polymeric composites; fabrication of micro/nano patterns on polymeric substrates to control wettability behavior; plasma processing of aluminum alloys to promote adhesion; UV-curing of adhesives; functionally graded adhesively bonded joints; adhesion between unvulgarized elastomers; electrowetting for digital microfluidics; control of biofilm at the tooth-restoration bonding interface; easy-to-clean superhydrophobic coatings; cyanoacrylates; promotion of resin-dentin bond longevity in adhesive dentistry; and effects of nanoparticles on nanocomposites Mode I and Mode II fractures.

Author: Ronald Krueger
Publisher:
ISBN:
Category :
Languages : en
Pages : 66

View

Book Description
An overview of the virtual crack closure technique is presented. The approach used is discussed, the history summarized, and insight into its applications provided. Equations for two-dimensional quadrilateral elements with linear and quadratic shape functions are given. Formula for applying the technique in conjuction with three-dimensional solid elements as well as plate/shell elements are also provided. Necessary modifications for the use of the method with geometrically nonlinear finite element analysis and corrections required for elements at the crack tip with different lengths and widths are discussed. The problems associated with cracks or delaminations propagating between different materials are mentioned briefly, as well as a strategy to minimize these problems. Due to an increased interest in using a fracture mechanics based approach to assess the damage tolerance of composite structures in the design phase and during certification, the engineering problems selected as examples and given as references focus on the application of the technique to components made of composite materials.

Author: Joachim Roesler
Publisher: Springer Science & Business Media
ISBN: 3540734481
Category : Science
Languages : en
Pages : 540

View

Book Description
How do engineering materials deform when bearing mechanical loads? To answer this crucial question, the book bridges the gap between continuum mechanics and materials science. The different kinds of material deformation are explained in detail. The book also discusses the physical processes occurring during the deformation of all classes of engineering materials and shows how these materials can be strengthened to meet the design requirements. It provides the knowledge needed in selecting the appropriate engineering material for a certain design problem. This book is both a valuable textbook and a useful reference for graduate students and practising engineers.

Author:
Publisher:
ISBN:
Category : Engineering geology
Languages : en
Pages : 608

View

Book Description

Author: Franz Roters
Publisher: John Wiley & Sons
ISBN: 3527642099
Category : Technology & Engineering
Languages : en
Pages : 188

View

Book Description
Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Author: Antonio A. Munjiza
Publisher: John Wiley & Sons
ISBN: 0470020172
Category : Technology & Engineering
Languages : en
Pages : 348

View

Book Description
The combined finite discrete element method is a relatively new computational tool aimed at problems involving static and / or dynamic behaviour of systems involving a large number of solid deformable bodies. Such problems include fragmentation using explosives (e.g rock blasting), impacts, demolition (collapsing buildings), blast loads, digging and loading processes, and powder technology. The combined finite-discrete element method - a natural extension of both discrete and finite element methods - allows researchers to model problems involving the deformability of either one solid body, a large number of bodies, or a solid body which fragments (e.g. in rock blasting applications a more or less intact rock mass is transformed into a pile of solid rock fragments of different sizes, which interact with each other). The topic is gaining in importance, and is at the forefront of some of the current efforts in computational modeling of the failure of solids. * Accompanying source codes plus input and output files available on the Internet * Important applications such as mining engineering, rock blasting and petroleum engineering * Includes practical examples of applications areas Essential reading for postgraduates, researchers and software engineers working in mechanical engineering.