Author: Publisher:
ISBN:
Category : Fluid dynamics
Languages : en
Pages : 30
Book Description
Flow Regime Transitions for Vertical Upward Gas Liquid Flow
Author: Annular Two-Phase Flow
Author: Geoffrey HewittPublisher: Elsevier
ISBN: 1483285235
Category : Technology & Engineering
Languages : en
Pages : 327
Book Description
Annular Two-Phase Flow presents the wide range of industrial applications of annular two-phase flow regimes. This book discusses the fluid dynamics and heat transfer aspects of the flow pattern. Organized into 12 chapters, this book begins with an overview of the classification of the various types of interface distribution observed in practice. This text then examines the various regimes of two-phase flow with emphasis on the regions of occurrence of the annular flow regime. Other chapters consider the single momentum and energy balances, which illustrate the differences and analogies between single- and two-phase flows. This book discusses as well the simple modes for annular flow with consideration to the calculation of the profile of shear stress in the liquid film. The final chapter deals with the techniques that are developed for the measurement of flow pattern, entrainment, and film thickness. This book is a valuable resource for chemical engineers.
Multiphase Science and Technology
Author: G.F. HewittPublisher: Springer Science & Business Media
ISBN: 3662016575
Category : Science
Languages : en
Pages : 495
Book Description
This is the second volume of Multiphase Science and TechnoJogy, a new international series of books intended to provide authoritative overviews of im portant areas in multiphase systems. The alm is to have systematic and tutorial presentations of the state of knowledge in various areas. The objective of the chapters is to allow the nonspecialist reader to gain an up-to-date idea of the present state of development in a given subject. The response to Volume 1 of the se ries has been very positive, and we believe that the present volume will be equally weil received. Volume 1 was concerned entirely with gas-liquid systems, and the first four chapters of the present volume also relate to such systems. However, the inten tion of the se ries is to cover a wide range of multiphase systems, and we are, therefore, pleased to include in the present volume chapters that refer to liquid liquid and gas-solid multiphase flows, respectively. The first chapter in the present volume is by Professor A. E. Dukler of the University of Houston, Texas, and Professor Y. Taitel of Tel-Aviv University, Israel.
Two-phase Flow and Heat Transfer
Author: David ButterworthPublisher:
ISBN: 9780198517184
Category : Fluid mechanics
Languages : en
Pages : 514
Book Description
Convective Boiling and Condensation
Author: John G. CollierPublisher: Clarendon Press
ISBN: 0191591262
Category :
Languages : en
Pages : 646
Book Description
* Third edition of a well-known and well established text both in industry and for teaching * Fully up-to-date and includes extra problems This book is an aid to heat exchanger design written primarily for design and development engineers in the chemical process, power generation, and refrigeration industries. It provides a comprehensive reference on two-phase flows, boiling, and condensation. The text covers all the latest advances like flows over tube bundles and two-phase heat transfer regarding refrigerants and petrochemicals. Another feature of this third edition is many new problems at chapter ends to enhance its use as a teaching text for graduate and post-graduate courses on two-phase flow and heat transfer. - ;This book is written for practising engineers as a comprehensive reference on two-phase flows, boiling, and condensation. It deals with methods for estimating two-phase flow pressure drops and heat transfer rates. It is a well-known reference book in its third edition and is also used as a text for advanced university courses. Both authors write from practical experience as both are professional engineers. -
Gas-liquid Flow with Low Liquid Loading in Slightly Inclined Pipes
Author: Eric GrolmanPublisher:
ISBN: 9789090074702
Category : Pipelines
Languages : en
Pages : 188
Book Description
Two-Phase Gas-Liquid Flow in Pipes with Different Orientations
Author: Afshin J. GhajarPublisher: Springer
ISBN: 9783030416256
Category : Science
Languages : en
Pages : 0
Book Description
This book provides design engineers using gas-liquid two-phase flow in different industrial applications the necessary fundamental understanding of the two-phase flow variables. Two-phase flow literature reports a plethora of correlations for determination of flow patterns, void fraction, two- phase pressure drop and non-boiling heat transfer correlations. However, the validity of a majority of these correlations is restricted over a narrow range of two -phase flow conditions. Consequently, it is quite a challenging task for the end user to select an appropriate correlation/model for the type of two-phase flow under consideration. Selection of a correct correlation also requires some fundamental understanding of the two-phase flow physics and the underlying principles/assumptions/limitations associated with these correlations. Thus, it is of significant interest for a design engineer to have knowledge of the flow patterns and their transitions and their influence on two-phase flow variables. To address some of these issues and facilitate selection of appropriate two-phase flow models, this volume presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommend some of the well scrutinized modeling techniques.
Physics of Gas-Liquid Flows
Author: Thomas J. HanrattyPublisher: Cambridge University Press
ISBN: 1107512972
Category : Technology & Engineering
Languages : en
Pages : 359
Book Description
Presenting tools for understanding the behaviour of gas-liquid flows based on the ways large scale behaviour relates to small scale interactions, this text is ideal for engineers seeking to enhance the safety and efficiency of natural gas pipelines, water-cooled nuclear reactors, absorbers, distillation columns and gas lift pumps. The review of advanced concepts in fluid mechanics enables both graduate students and practising engineers to tackle the scientific literature and engage in advanced research. It focuses on gas-liquid flow in pipes as a simple system with meaningful experimental data. This unified theory develops design equations for predicting drop size, frictional pressure losses and slug frequency, which can be used to determine flow regimes, the effects of pipe diameter, liquid viscosity and gas density. It describes the effect of wavy boundaries and temporal oscillations on turbulent flows, and explains transition between phases, which is key to understanding the behaviour of gas-liquid flows.
All Fluid-flow-regimes Simulation Model for Internal Flows
Author: John P. AbrahamPublisher: Nova Novinka
ISBN: 9781611225037
Category : Laminar flow
Languages : en
Pages : 0
Book Description
A multi-regime fluid flow model for internal flows has been applied to several pipe and duct problems. The investigated flow regimes and inter-regime transformations include fully laminar and fully turbulent, laminarisation, and turbulentisation. The model auto-selects both the flow regimes and the inter-regime transformations. This book studies both steady and unsteady flows, as well as flows in pipes and ducts of both axially unchanging cross section and axially enlarging cross section.
Gas-liquid Flows
Author: Barry J. AzzopardiPublisher: Begell House Publishers
ISBN: 9781567002331
Category : Condensation
Languages : en
Pages : 331
Book Description