Author: Ship Systems - Fasteners Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This SAE Part Standard covers selected machine screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document. PurposeThe purpose of this document is to assist the designer and other personnel in providing requirements and part identifying numbers for the most commonly used machine screws for ship systems and equipment. A part or identification number is normally required for all military applications and provides a useful means of communicating fastener requirements to suppliers and manufacturers in a very succinct manner. Machine Screw Part NumbersThis document provides part or identifying numbers that can be used to identify machine screws covered by this document. The parts covered by this document are manufactured in accordance with materials and processes identified in standards issued by ASTM. The part identification number (PIN) identifies the thread form, type of head, type of drive, nominal diameter, special features (plating, locking elements), nominal length and fastener material.
Fastener Part Standard--Machine Screws
Fastener Part Standard - Machine Screw Nuts (Metric and Inch)
Author: Ship Systems - Fasteners Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This SAE Part Standard covers selected machine screw nuts manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This document covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document. PurposeThe purpose of this document is to assist the designer and other personnel in providing requirements and part identifying numbers for the most commonly used machine screw nuts. A part or identification number is normally required for all military applications and provides a useful means of communicating fastener requirements to suppliers and manufacturers in a very succinct manner. Machine Screw Nut Part NumbersThis document provides part or identifying numbers that can be used to identify machine screw nuts covered by this document. The part identification number (PIN) identifies the thread form, configuration (shape), nominal diameter, special features (plating and coatings), and fastener material.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This SAE Part Standard covers selected machine screw nuts manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This document covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document. PurposeThe purpose of this document is to assist the designer and other personnel in providing requirements and part identifying numbers for the most commonly used machine screw nuts. A part or identification number is normally required for all military applications and provides a useful means of communicating fastener requirements to suppliers and manufacturers in a very succinct manner. Machine Screw Nut Part NumbersThis document provides part or identifying numbers that can be used to identify machine screw nuts covered by this document. The part identification number (PIN) identifies the thread form, configuration (shape), nominal diameter, special features (plating and coatings), and fastener material.
Fastener Standards
Fastener Part Standard Caps Screws, Hex Bolts, and Hex Nuts (inch Dimensioned)
Author: Ship Systems - Fasteners Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This SAE Part Standard covers selected inch screws, hex bolts, and nuts manufactured in accordance with SAE and American Society for Testing and Materials (ASTM) fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This SAE Part Standard covers selected inch screws, hex bolts, and nuts manufactured in accordance with SAE and American Society for Testing and Materials (ASTM) fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.
Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric)
Author: Ship Systems - Fasteners Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document. The use of SAE J2295M has been limited due to the fact that most of the metric nuts and bolts available in the United States have not been made to the ASME dimensional standards referenced in SAE J2295. Rather, most of the available metric products available have been manufactured to DIN and ISO standards. ASME has recently been withdrawing their metric dimensional standards in favor of the ISO standards. Other references in SAE J2295 may also have been withdrawn or superseded.Generally, the fasteners to ISO and other National metric fasteners available on the market are interchangeable with those covered by SAE J2295M. It is recommended that ISO metric fasteners be used for new design. For support of current designs, SAE J2295M requirements can be compared to fasteners manufactured to ISO and other National Metric Standards to determine the suitability of these more readily available fasteners.However, it is considered important that SAE J2295M standard be available for reference to support those applications where it has been used. The Part Identification Numbers (PINs) in SAE J2295M may have been used on drawings and users may need to refer to this part standard to identify the characteristics of these fasteners.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document. The use of SAE J2295M has been limited due to the fact that most of the metric nuts and bolts available in the United States have not been made to the ASME dimensional standards referenced in SAE J2295. Rather, most of the available metric products available have been manufactured to DIN and ISO standards. ASME has recently been withdrawing their metric dimensional standards in favor of the ISO standards. Other references in SAE J2295 may also have been withdrawn or superseded.Generally, the fasteners to ISO and other National metric fasteners available on the market are interchangeable with those covered by SAE J2295M. It is recommended that ISO metric fasteners be used for new design. For support of current designs, SAE J2295M requirements can be compared to fasteners manufactured to ISO and other National Metric Standards to determine the suitability of these more readily available fasteners.However, it is considered important that SAE J2295M standard be available for reference to support those applications where it has been used. The Part Identification Numbers (PINs) in SAE J2295M may have been used on drawings and users may need to refer to this part standard to identify the characteristics of these fasteners.
Fasteners Part Standard--Cap Screws, Hex Bolts, and Hex Nuts (Inch Dimensioned)
Author: Ship Systems Technical Steering Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This SAE Standard provides part numbers for the identification of fasteners for ship systems and equipment. This document lists some of the more common industry standards that have associated part numbering systems. In addition, this document provides part numbers for screws and nuts to American Society for Testing and Materials (ASTM) fastener standards covering materials most often used in ship systems and equipment. The purpose of this document is to assist the designer and other personnel in providing standard part numbers for the most commonly used fasteners for ship systems and equipment. A part identification number (PIN) is normally required for all military applications and provides a useful means of communicating fastener requirements to suppliers and manufacturers in a very succinct manner.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This SAE Standard provides part numbers for the identification of fasteners for ship systems and equipment. This document lists some of the more common industry standards that have associated part numbering systems. In addition, this document provides part numbers for screws and nuts to American Society for Testing and Materials (ASTM) fastener standards covering materials most often used in ship systems and equipment. The purpose of this document is to assist the designer and other personnel in providing standard part numbers for the most commonly used fasteners for ship systems and equipment. A part identification number (PIN) is normally required for all military applications and provides a useful means of communicating fastener requirements to suppliers and manufacturers in a very succinct manner.
American Standard Unified and American Screw Threads for Screws, Bolts, Nuts, and Other Threaded Parts
Author: American Standards Association. Sectional Committee on Standardization and Unification of Screw Threads, B1
Publisher:
ISBN:
Category : Screw-threads, Standard
Languages : en
Pages : 114
Book Description
Publisher:
ISBN:
Category : Screw-threads, Standard
Languages : en
Pages : 114
Book Description
American Standard Unified Screw Threads (including American National Threads) for Screws, Bolts, Nuts, and Other Threaded Parts
Author: American Standards Association. Sectional Committee on Standardization and Unification of Screw Threads, B-1
Publisher:
ISBN:
Category : Screw-threads, Standard
Languages : en
Pages : 172
Book Description
Publisher:
ISBN:
Category : Screw-threads, Standard
Languages : en
Pages : 172
Book Description
American Standard National Standard Screw Threads
Author:
Publisher:
ISBN:
Category : Screw-threads, Standard
Languages : en
Pages : 42
Book Description
Publisher:
ISBN:
Category : Screw-threads, Standard
Languages : en
Pages : 42
Book Description
Specification for Machine Screws and Machine Screw Nuts. Metric Series
Author: British Standards Institute Staff
Publisher:
ISBN: 9780580345784
Category :
Languages : en
Pages : 48
Book Description
Screws (bolts), Nuts, Slotted-head fasteners, ISO metric threads, Recessed-head fasteners, Dimensions, Diameter, Heads (fasteners), Length, Threads, Radius, Slots, Gauges, Hexagonal-head fasteners, Square-head fasteners, Cheese-head fasteners, Countersunk fasteners, Raised-head fasteners, Pan-head fasteners, Slotted-head fasteners, Points (fasteners)
Publisher:
ISBN: 9780580345784
Category :
Languages : en
Pages : 48
Book Description
Screws (bolts), Nuts, Slotted-head fasteners, ISO metric threads, Recessed-head fasteners, Dimensions, Diameter, Heads (fasteners), Length, Threads, Radius, Slots, Gauges, Hexagonal-head fasteners, Square-head fasteners, Cheese-head fasteners, Countersunk fasteners, Raised-head fasteners, Pan-head fasteners, Slotted-head fasteners, Points (fasteners)