Author: M. G. JonckheerePublisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Fabrication and pre-irradiation data for twelve 600 mw design fuel elements to be irradiated in the NRX reactor
Author: M. G. JonckheereIrradiation data for experiment fdo-716 : twelve bruce sized fuel elements irradiated in the NRX reactor
Author: R. J. ZanattaNuclear Fuel Elements
Author: Brian R. T. FrostPublisher: Elsevier
ISBN: 1483155250
Category : Technology & Engineering
Languages : en
Pages : 284
Book Description
Nuclear Fuel Elements: Design, Fabrication and Performance is concerned with the design, fabrication, and performance of nuclear fuel elements, with emphasis on fast reactor fuel elements. Topics range from fuel types and the irradiation behavior of fuels to cladding and duct materials, fuel element design and modeling, fuel element performance testing and qualification, and the performance of water reactor fuels. Fast reactor fuel elements, research and test reactor fuel elements, and unconventional fuel elements are also covered. This volume consists of 12 chapters and begins with an overview of nuclear reactors and fuel elements, as well as fuel element design and development based on the reactor operator's approach, materials scientist's approach, and interdisciplinary approach. The reader is then introduced to different types of nuclear fuels and their irradiation behavior, considerations for using cladding and duct materials in fuel element design and development, and fuel element design and modeling. The chapters that follow focus on the testing of fuel element performance, experimental techniques and equipment for testing fuel element designs, and the performance of fuels for water reactors. Fuel elements for gas-cooled reactors, fast reactors, and research and test reactors are also described. The book concludes with an assessment of unconventional fuel elements. This book will be useful to fuel element technologists as well as materials scientists and engineers.
Pre-irradiation data on the fabrication of 12 short fuel elements for the NRX-644 experiment
Author: A. E. MacinnesNuclear Reactor Fuel Elements
Author: Albert R. KaufmannPublisher:
ISBN:
Category : Nuclear fuels
Languages : en
Pages : 760
Book Description
Nuclear Superheat Project Fabrication, Irradiation and Evaluation of Superheat Fuel Element SH-1 and SH-2
Author: E. A. LeesPublisher:
ISBN:
Category : Nuclear fuel elements
Languages : en
Pages : 40
Book Description
The fabrication, irradiation and evaluation of the first two superheat fuel assemblies is described in detail. Experimental data indicate that, in general, the nuclear superheat fuel elements have performed satisfactorily under the testing conditions used. Certain problem areas which will influence future fuel element designs have been defined.
Pre-irradiation report on the fabrication of twelve short elements for NRX-437
Author: A. W. StewartPre-irradiation data report on fabrication of 2 19 element fuel bundles for irradiation in NPD reactor
Author: G. WongDesign of Production Test IP-381-A-FP, Irradiation of Oversize Fuel Elements in the C Reactor Overbored Process Channel Facilities
Author: Publisher:
ISBN:
Category :
Languages : en
Pages : 13
Book Description
Recent studies have confirmed that large incentives exist for overboring the reactor process channels approximately 500 mils in the C and five old reactors, under the updated Plant Improvement Program. Conservative estimates of the incentives for overboring indicate a payout period of about two years for the proposed work, an increase in plutonium production of 15--18%, derived from increased conversion ratio and a reduction in plant unit cost. The proposal to overbore the graphite channels approximately 500--550 mils in one or more of the present Hanford reactors will require fuel elements about 0.5-inch larger in diameter than the present I & E fuel elements. Since there is only limited experience at HAPO in fabrication and irradiation of large diameter fuel elements, it is highly desirable to secure additional experience to assure that large fuel element technology will be available for full scale reactor use in advance of the time when extensive overboring of the old reactors is implemented. This report presents the design of the test to fabricate and irradiate the oversize (PIP-1) fuel elements.
Design, Fabrication, and Irradiation of Superheat Fuel Element SH-4B in VBWR
Author: C. N. SpalarisPublisher:
ISBN:
Category : Boiling water reactors
Languages : en
Pages : 80
Book Description