Author: Richard Allen Blackburn
Publisher:
ISBN:
Category : Piling (Civil engineering)
Languages : en
Pages : 312
Book Description
Experimental Study of the Uplift Resistance of Piles
Author: Richard Allen Blackburn
Publisher:
ISBN:
Category : Piling (Civil engineering)
Languages : en
Pages : 312
Book Description
Publisher:
ISBN:
Category : Piling (Civil engineering)
Languages : en
Pages : 312
Book Description
Experimental Study of Ultimate Uplift Resistance of Roughened Model Piles in Sand
Experimental Study of Ultimate Uplift Resistance of Roughened Model Piles in Sand
Model Tests for Uplift Resistance of Piles in Sand
Author: AI. Al-Mhaidib
Publisher:
ISBN:
Category : Large-scale models
Languages : en
Pages : 9
Book Description
An experimental program using large model piles in sand was conducted to study the shaft resistance behavior of piles subject to uplift loads. Model single pipe piles of different diameters (45 to 178 mm) were subjected to static uplift loading to failure. The piles, which had an embedded length of about 1.7 to 2 m, were installed in a large test pit (3 by 3 by 3 m) by three different methods (driving, jacking, and a reference undisturbed method with negligible lateral displacement) to assess the influence of method of installation on shaft resistance. The tests were performed in two initial densities of a sand (loose and dense). The experimental results were analyzed statistically. The results show that the initial sand density and the method of pile installation are the most significant factors that affect uplift capacity. Installation methods that cause less disturbance give higher uplift capacity. Unit shaft resistance could be reduced as much as by half depending on the method of pile installation relative to the undisturbed method. The displacement at the ultimate uplift load is in the range of 5 to 12.5 mm and independent of soil type and pile diameter, but depends on method of pile installation.
Publisher:
ISBN:
Category : Large-scale models
Languages : en
Pages : 9
Book Description
An experimental program using large model piles in sand was conducted to study the shaft resistance behavior of piles subject to uplift loads. Model single pipe piles of different diameters (45 to 178 mm) were subjected to static uplift loading to failure. The piles, which had an embedded length of about 1.7 to 2 m, were installed in a large test pit (3 by 3 by 3 m) by three different methods (driving, jacking, and a reference undisturbed method with negligible lateral displacement) to assess the influence of method of installation on shaft resistance. The tests were performed in two initial densities of a sand (loose and dense). The experimental results were analyzed statistically. The results show that the initial sand density and the method of pile installation are the most significant factors that affect uplift capacity. Installation methods that cause less disturbance give higher uplift capacity. Unit shaft resistance could be reduced as much as by half depending on the method of pile installation relative to the undisturbed method. The displacement at the ultimate uplift load is in the range of 5 to 12.5 mm and independent of soil type and pile diameter, but depends on method of pile installation.
Numerical and Experimental Study of Shaft Resistance of Piles in Granular Soils
Author: Mostafa A. Abdel Rahman
Publisher:
ISBN:
Category :
Languages : en
Pages : 370
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 370
Book Description
Experimental Investigation of the Uplift Behavior of Spread Foundations in Cohesionless Soil
Author: Costakis N. Nicolaides
Publisher:
ISBN:
Category : Foundations
Languages : en
Pages : 788
Book Description
Publisher:
ISBN:
Category : Foundations
Languages : en
Pages : 788
Book Description
Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1461534747
Category : Science
Languages : en
Pages : 421
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Publisher: Springer Science & Business Media
ISBN: 1461534747
Category : Science
Languages : en
Pages : 421
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Experimental Study of the Undrained Uplift Behavior of Model Drilled Shaft Foundations
Author: John Frederick Beech
Publisher:
ISBN:
Category : Shafts (Excavations)
Languages : en
Pages : 1046
Book Description
Publisher:
ISBN:
Category : Shafts (Excavations)
Languages : en
Pages : 1046
Book Description
Recent Advances in Civil Engineering
Author: Lakshman Nandagiri
Publisher: Springer Nature
ISBN: 9811918627
Category : Technology & Engineering
Languages : en
Pages : 1088
Book Description
This book presents the select proceedings of the International Conference on Civil Engineering Trends and Challenges for Sustainability (CTCS 2021). It discusses emerging and latest research and advances in sustainability in different areas of civil engineering, providing solutions to sustainable development. Various topics covered include sustainable construction technology & building materials; structural engineering, transportation and traffic engineering, geotechnical engineering, environmental engineering, water resources engineering, remote sensing and GIS applications. This book will be of potential interest to researchers and professionals working in sustainable civil engineering and related fields.
Publisher: Springer Nature
ISBN: 9811918627
Category : Technology & Engineering
Languages : en
Pages : 1088
Book Description
This book presents the select proceedings of the International Conference on Civil Engineering Trends and Challenges for Sustainability (CTCS 2021). It discusses emerging and latest research and advances in sustainability in different areas of civil engineering, providing solutions to sustainable development. Various topics covered include sustainable construction technology & building materials; structural engineering, transportation and traffic engineering, geotechnical engineering, environmental engineering, water resources engineering, remote sensing and GIS applications. This book will be of potential interest to researchers and professionals working in sustainable civil engineering and related fields.
Recent Developments In Civil Engineering
Author: Vijay Kumar, Anupam Rawat, R. P. Tiwari
Publisher: BFC Publications
ISBN: 9357642757
Category : Technology & Engineering
Languages : en
Pages : 275
Book Description
A book on Recent Developments in Civil engineering would likely focus on the latest advancements and innovations in the field of Civil Engineering. The book would cover a wide range of topics related to Civil engineering, such as sustainable infrastructure design, construction materials and construction techniques, transportation systems and infrastructure, geotechnical engineering, water resources and management, environmental engineering and sustainability of structures and its design.
Publisher: BFC Publications
ISBN: 9357642757
Category : Technology & Engineering
Languages : en
Pages : 275
Book Description
A book on Recent Developments in Civil engineering would likely focus on the latest advancements and innovations in the field of Civil Engineering. The book would cover a wide range of topics related to Civil engineering, such as sustainable infrastructure design, construction materials and construction techniques, transportation systems and infrastructure, geotechnical engineering, water resources and management, environmental engineering and sustainability of structures and its design.