Evaluation of Tensile Properties Using a TEM Disk-Size Specimen PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Evaluation of Tensile Properties Using a TEM Disk-Size Specimen PDF full book. Access full book title Evaluation of Tensile Properties Using a TEM Disk-Size Specimen by Y. Higo. Download full books in PDF and EPUB format.
Author: Y. Higo Publisher: ISBN: Category : Annealing of metals Languages : en Pages : 11
Book Description
Attempting to miniaturize mechanical specimens is certainly not new. In fusion reactor material development, limited space in the test reactor and the dose to personnel in the post-irradiation state dictates that the specimen size be reduced without reducing the accuracy of the test. A four-point bend test on TEM disk specimens (0.3 mm in thickness and 3 mm in diameter) was carried out to evaluate tension test parameters. The bending load-deflection records obtained from the miniature specimen were interpreted with a large-scale deflection bending analysis. The tensile yield strength and the ultimate tensile strength of both a 316L-type stainless steel and a 7075 T6 aluminum (Al) alloy obtained from the miniature four-point bend test agreed well with standard tension test results. A gripping system for tension testing of the TEM-size specimens was also developed. The ultimate tensile strength results of two stainless steels agreed well with those obtained from standard-size specimens; however, the tensile yield strength could not be determined.
Author: Y. Higo Publisher: ISBN: Category : Annealing of metals Languages : en Pages : 11
Book Description
Attempting to miniaturize mechanical specimens is certainly not new. In fusion reactor material development, limited space in the test reactor and the dose to personnel in the post-irradiation state dictates that the specimen size be reduced without reducing the accuracy of the test. A four-point bend test on TEM disk specimens (0.3 mm in thickness and 3 mm in diameter) was carried out to evaluate tension test parameters. The bending load-deflection records obtained from the miniature specimen were interpreted with a large-scale deflection bending analysis. The tensile yield strength and the ultimate tensile strength of both a 316L-type stainless steel and a 7075 T6 aluminum (Al) alloy obtained from the miniature four-point bend test agreed well with standard tension test results. A gripping system for tension testing of the TEM-size specimens was also developed. The ultimate tensile strength results of two stainless steels agreed well with those obtained from standard-size specimens; however, the tensile yield strength could not be determined.
Author: Ashish Kolhatkar Publisher: ISBN: Category : Tensile architecture Languages : en Pages : 15
Book Description
In this work, a miniature tensile specimen with nominal dimensions of 3.0-mm gage length (GL), 1.5-mm gage width, and 0.5-mm thickness that was carved out of a 10.0-mm-diameter disk has been developed and standardized using analytical and experimental methods. The geometry of the miniature specimen, called ultra sub-size (USS), was optimized using finite element analysis to determine the fillet radius and appropriate geometrical tolerances for specimen dimensions like gage width and thickness. The methods of specimen preparation, gripping, and tensile testing with the use of digital image correlation for strain measurement were standardized. The 0.2 % offset yield strength, ultimate tensile strength, and uniform strain of different materials obtained using this specimen geometry were analyzed and compared with the results of ASTM sub-size (GL: 25mm) and further sub-size geometry (GL: 12.5mm) The results of this study show that USS tensile specimen geometry developed in this work can be reliably employed for mechanical property evaluation in situations where tensile testing using standard-size specimens is practically not possible.
Author: V. Karthik Publisher: CRC Press ISBN: 1315354853 Category : Science Languages : en Pages : 123
Book Description
This book is a comprehensive overview of methods of characterizing the mechanical properties of engineering materials using specimen sizes in the micro-scale regime (0.3-5.0 mm). A range of issues associated with miniature specimen testing like correlation methodologies for data transferability between different specimen sizes, use of numerical simulation/analysis for data inversion, application to actual structures using scooped out samples or by in-situ testing, and more importantly developing a common code of practice are discussed and presented in a concise manner.
Author: Sujitkumar Dongare Publisher: ISBN: Category : Manufacturing processes Languages : en Pages : 86
Book Description
"The study of mechanical properties of metals provides a basis to decide on the capability of a particular metal for a task and also to make predictions about its life. The concepts of stress, strain and strength of materials are employed in practically every engineering discipline. Mechanical properties such as stiffness, yield strength, tensile strength, ductility, toughness, impact resistance, creep resistance, fatigue resistance and others, influence the design, fabrication and service life of equipment. Therefore, more than one property is considered for the material selection process for an application. For complete understanding of any material and its feasibility for a particular application, inter-related mechanical properties have to be measured. Unfortunately, these properties cannot be measured in any single test. However, the tensile test can be used to measure a number of the most commonly used mechanical properties. Extensive research has already been performed in this area. Standards have been developed and established regarding the size of test specimens, testing procedures and process parameters. This thesis discusses the development of a testing procedure for non-standard tensile tests for evaluation of material properties. Miniature test specimens similar to the standard ASTM E8 were designed and used for testing. The tests were mainly conducted on the baseline material for aerospace industry i.e. Ti-6Al-4V"--Abstract, leaf iv.
Author: Publisher: ISBN: Category : Engineering Languages : en Pages : 2398
Book Description
Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Author: Carlos Suarez Publisher: Springer ISBN: 3319481797 Category : Technology & Engineering Languages : en Pages : 1314
Book Description
An update of the definitive annual reference source in the field of aluminum production and related light metals technologies, a great mix of materials science and practical, applied technology surrounding aluminum, bauxite, aluminum reduction, rolling, casting, and production.
Author: Y. Higo
Author: Y. Higo
Author: W. R. Corwin
Author: Ashish Kolhatkar
Author: V. Karthik
Author: 
Author: Sujitkumar Dongare
Author: 
Author: W. R. Corwin
Author: 
Author: Carlos Suarez