Electron Microscopic and Spectroscopic Characterization for Soot Source Differentiation by Laser Derivatization PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Electron Microscopic and Spectroscopic Characterization for Soot Source Differentiation by Laser Derivatization PDF full book. Access full book title Electron Microscopic and Spectroscopic Characterization for Soot Source Differentiation by Laser Derivatization by Chethan Gaddam. Download full books in PDF and EPUB format.
Author: Chethan Gaddam Publisher: ISBN: Category : Languages : en Pages :
Book Description
Combustion produced soot is highly variable with nanostructure and chemistry dependent upon combustion conditions and fuel. Previous studies have shown soot nanostructure to be dependent upon the source via quantification of high-resolution transmission electron microscopy (HRTEM) images for nanostructural parameters. In principle this permits identification of the soot source and its contribution to any particular receptor site. Yet many structural aspects are subtle, and the chemistry of lamellae is unaddressed for reasons of poorly resolved or differentiated nanostructure and insufficient sample quantity for traditional analytical methods. This characterization gap then leads to the formative question prompting this study: how best to bring out small differences in nanostructure and other seemingly subtle differences in chemistry? A process of pulsed laser annealing is proposed to highlight compositional and structural differences thereby distinctively and uniquely identifying the source of the soot. The operative premise being that small variations in nanostructure and unresolved differences in chemistry exist and are specific to the particular combustion process. The overall goal is then to develop the laser-based heating as an analytical tool by identifying the process conditions and operational parameters for optimal derivatization. Specific objectives directed towards achieving this goal include: 1)Identifying optimal laser operational parameters for derivatization. 2)Defining the dependence upon nanostructure and molecular composition using model soots while also identifying variability and range of outcomes. 3)Demonstrating differentiation upon combustion derived soots from real engines, e.g. diesel, gasoline, gas-turbines, combustors, etc.4)Applying image processing algorithms to the laser heated soots to quantify and differentiate the transformed carbon nanostructures.For laser derivatization, a sample-housing chamber was custom built using a commercial optical grade quartz tube. Depending on the sample quantity, two different sample support systems were designed. Soot was laser-heated while in an inert (Ar) atmosphere using a pulsed Nd:YAG laser operating at 1064 nm. A laser beam dimension of ca 9 mm in diameter ensured that the entire sample area received uniform irradiation. To identify the optimal laser fluence, pulsed laser heating was applied at three different laser fluences to three carbon samples. Laser heating at these short timescales produced partially graphitized structures comprised of extended graphitic layers (>1 nm), and voids as material is rearranged. While laser heating the material with additional pulses did further graphitize the material, multiple pulses were not particularly beneficial for laser derivatization as this repetitive exposure decreased the degree of differentiation between the test samples. Based on visual HRTEM observations and quantified fringe analysis, a single pulse laser fluence of 250 mJ/cm2 (~2800 K, determined from multi-wavelength pyrommetry) produced the best derivatization without causing fragmentation or material ablation. For demonstrating the uniqueness of the laser-derivatized (nano)structure as dependent upon source and combustion conditions, the laser derivatization technique was validated by comparing different synthetic carbons, selected soots from transportation and residential combustion sources, and laboratory flames, each with recognizable nanostructure. After laser heating, the direction of nanostructure evolution of the synthetic carbons (possessing C:H > 10:1) appeared to be governed by their initial nanostructure as shown by HRTEM images. As illustration of chemistry's role, though nascent R250 carbon black showed structural similarity across multiple particles, laser heating led to either hollow shells or particles with internal structures. These differences were attributed to the chemistry of construction, i.e., the sp2/sp3 bonding as quantified by electron energy loss spectroscopy (EELS), showing significant differences between particles as large as 60%. The nanostructure of soots from different transportation sources (such as diesel, jet and gasoline engines) evolved distinctively upon laser annealing. Laser derivatization of soot collected from same platform (engine-type) revealed that fuel commonality leads to similar nanostructure for the same class of combustion source, whereas, fuel dependence and ensuing chemistry differences were prominently illustrated by comparison of laser-annealed soots originating from ultra-low sulfur diesel (ULSD) and an oxygenated fuel blend. The origin for this dependence was identified by X-ray photoelectron spectroscopy (XPS), revealing a significantly lower sp2/sp3 carbon bonding for the oxygenated fuels compared to their pure hydrocarbon fuels. As another example, laser annealing of residential boiler soot produced highly intertwined lamellae; this was attributed to inherent chemistry differences relative to the biodiesel (B100) soot that similarly lacked recognizable nanostructure. These observations suggest that the initial soot nanostructure in conjunction with the chemistry of construction governs the material transformation under pulsed laser annealing. Image processing algorithms were applied to quantify and differentiate the carbon nanostructural changes after laser annealing. A "recognition key" approach using a combination of present quantification algorithms: 1) fringe analysis, 2) stacking distribution, and 3) void dimension was reported for two laser-heated carbons, as examples. A second, method, using the radial intensity profile generated from the Fourier-Transformed bright field image was implemented to identify soot source upon laser derivatization against a reference set of values in a database. This semi-automated analytical method involves conversion of HRTEM images into the frequency domain, band-pass filtering, radial intensity profiling, and identification by least squares comparison with an empirically set limit for the sum of residuals. To illustrate the analytical methodology for source identification, a mixture of three soots was analyzed by laser derivatization. Laser heating led to visual differences; further quantification and comparison to the database identified the respective sources.
Author: Chethan Gaddam Publisher: ISBN: Category : Languages : en Pages :
Book Description
Combustion produced soot is highly variable with nanostructure and chemistry dependent upon combustion conditions and fuel. Previous studies have shown soot nanostructure to be dependent upon the source via quantification of high-resolution transmission electron microscopy (HRTEM) images for nanostructural parameters. In principle this permits identification of the soot source and its contribution to any particular receptor site. Yet many structural aspects are subtle, and the chemistry of lamellae is unaddressed for reasons of poorly resolved or differentiated nanostructure and insufficient sample quantity for traditional analytical methods. This characterization gap then leads to the formative question prompting this study: how best to bring out small differences in nanostructure and other seemingly subtle differences in chemistry? A process of pulsed laser annealing is proposed to highlight compositional and structural differences thereby distinctively and uniquely identifying the source of the soot. The operative premise being that small variations in nanostructure and unresolved differences in chemistry exist and are specific to the particular combustion process. The overall goal is then to develop the laser-based heating as an analytical tool by identifying the process conditions and operational parameters for optimal derivatization. Specific objectives directed towards achieving this goal include: 1)Identifying optimal laser operational parameters for derivatization. 2)Defining the dependence upon nanostructure and molecular composition using model soots while also identifying variability and range of outcomes. 3)Demonstrating differentiation upon combustion derived soots from real engines, e.g. diesel, gasoline, gas-turbines, combustors, etc.4)Applying image processing algorithms to the laser heated soots to quantify and differentiate the transformed carbon nanostructures.For laser derivatization, a sample-housing chamber was custom built using a commercial optical grade quartz tube. Depending on the sample quantity, two different sample support systems were designed. Soot was laser-heated while in an inert (Ar) atmosphere using a pulsed Nd:YAG laser operating at 1064 nm. A laser beam dimension of ca 9 mm in diameter ensured that the entire sample area received uniform irradiation. To identify the optimal laser fluence, pulsed laser heating was applied at three different laser fluences to three carbon samples. Laser heating at these short timescales produced partially graphitized structures comprised of extended graphitic layers (>1 nm), and voids as material is rearranged. While laser heating the material with additional pulses did further graphitize the material, multiple pulses were not particularly beneficial for laser derivatization as this repetitive exposure decreased the degree of differentiation between the test samples. Based on visual HRTEM observations and quantified fringe analysis, a single pulse laser fluence of 250 mJ/cm2 (~2800 K, determined from multi-wavelength pyrommetry) produced the best derivatization without causing fragmentation or material ablation. For demonstrating the uniqueness of the laser-derivatized (nano)structure as dependent upon source and combustion conditions, the laser derivatization technique was validated by comparing different synthetic carbons, selected soots from transportation and residential combustion sources, and laboratory flames, each with recognizable nanostructure. After laser heating, the direction of nanostructure evolution of the synthetic carbons (possessing C:H > 10:1) appeared to be governed by their initial nanostructure as shown by HRTEM images. As illustration of chemistry's role, though nascent R250 carbon black showed structural similarity across multiple particles, laser heating led to either hollow shells or particles with internal structures. These differences were attributed to the chemistry of construction, i.e., the sp2/sp3 bonding as quantified by electron energy loss spectroscopy (EELS), showing significant differences between particles as large as 60%. The nanostructure of soots from different transportation sources (such as diesel, jet and gasoline engines) evolved distinctively upon laser annealing. Laser derivatization of soot collected from same platform (engine-type) revealed that fuel commonality leads to similar nanostructure for the same class of combustion source, whereas, fuel dependence and ensuing chemistry differences were prominently illustrated by comparison of laser-annealed soots originating from ultra-low sulfur diesel (ULSD) and an oxygenated fuel blend. The origin for this dependence was identified by X-ray photoelectron spectroscopy (XPS), revealing a significantly lower sp2/sp3 carbon bonding for the oxygenated fuels compared to their pure hydrocarbon fuels. As another example, laser annealing of residential boiler soot produced highly intertwined lamellae; this was attributed to inherent chemistry differences relative to the biodiesel (B100) soot that similarly lacked recognizable nanostructure. These observations suggest that the initial soot nanostructure in conjunction with the chemistry of construction governs the material transformation under pulsed laser annealing. Image processing algorithms were applied to quantify and differentiate the carbon nanostructural changes after laser annealing. A "recognition key" approach using a combination of present quantification algorithms: 1) fringe analysis, 2) stacking distribution, and 3) void dimension was reported for two laser-heated carbons, as examples. A second, method, using the radial intensity profile generated from the Fourier-Transformed bright field image was implemented to identify soot source upon laser derivatization against a reference set of values in a database. This semi-automated analytical method involves conversion of HRTEM images into the frequency domain, band-pass filtering, radial intensity profiling, and identification by least squares comparison with an empirically set limit for the sum of residuals. To illustrate the analytical methodology for source identification, a mixture of three soots was analyzed by laser derivatization. Laser heating led to visual differences; further quantification and comparison to the database identified the respective sources.
Author: Madhu Singh Publisher: ISBN: Category : Languages : en Pages :
Book Description
The negative health implications associated with combustion produced soot demand identification of contributing sources, quantification and characterization of their emissions to assess its impact, and control to minimize the imposed hazard. Distinguishing different sources of soot from engines and combustors is challenging, given the morphological and chemical similarity of the emitted soot. Leaner combustion conditions and tighter emission limits challenge traditional filter-based measurements for soot mass. Meanwhile, current after-treatment particulate control strategies are based on regeneration, i.e., soot oxidation which in turn depends upon soot nanostructure and composition (such as in a diesel particulate filter). Presently, effects on human health associated with soot exposure are largely correlative, while controlled lab studies predominantly use varied washings or extracts of soot, but rarely the actual particulate. Given the intertwined nature of these topics this dissertation addresses each in an integrated approach. Laser-induced incandescence (LII) is used to determine soot concentration while Time-resolved LII (TiRe-LII) can be used to estimate soot primary particle size largely by using available and appropriate models. The use of laser diagnostics has been used to experimentally demonstrate prevailing inconsistencies between experimentally measured and model-derived particle diameter values. Discrepancies have been attributed (a) to the empiricism associated with evaluating modeling variables and (b) to the lack of proper accountability of the changes in soot nanostructure upon heating with a pulsed laser. This work uses an experimental approach coupled with microscopy to (a) test the robustness of existing LII models and (b) inform existing models of experimental observations so that these can be accounted for in future models. Specifically, the contribution of changing soot nanostructure on laser heating is known and is shown here again with transmission electron microscopy (TEM). However, the change in soots optical properties because of an altered nanostructure remains unclear. Optical properties change when soot is laser-heated, and this alteration of optical properties upon laser heat treatment has been shown in this work experimentally, by using UV-Vis spectroscopy. Also, the effect of the degree of aggregation on the soots cooling profile is highlighted. This work demonstrates that different degrees of aggregation results in a shift of the time-temperature-history (TTH), thereby resulting in erroneous particle size predictions, which are calculated from the materials TTH. Unfortunately, most models assume point-contacting spheres and aggregation remains unaccounted for. The effect of the thermal accommodation coefficient is similar in that a small change in the value of this mathematical parameter significantly alters particle cooling as simulated here by an open-access simulator, indicating the need to exercise caution when assigning a value to this parameter in the model. While the change in soot nanostructure as a consequence of laser annealing complicates the interpretation from LII measurements, laser heating of soot can reciprocally be used to purposefully study the evolution in soot nanostructure as a function of its chemistry. Soot chemistry varies with its combustion environment, with fuel and combustion conditions specific to each source. Thus, by association, the evolution of soot nanostructure observed upon laser heat treatment can be correlated to its fuel origins and combustion origins, potentially identifying its formation source. Fundamentally, the presence of oxygen in nascent soot is identified here as a key compositional parameter. The increase in oxygen content of the fuel, as diesel is blended with increased proportions of biofuel, is correlated to increased oxygen content in the soot that is generated by the respective fuel. In other words, fuel with a higher oxygen content generates soot which also has oxygen content relatively higher than soot generated by fuel with low oxygen content. This work shows that oxygen dictates the evolution of soot nanostructure when it escapes the material upon laser heat treatment. When laser heated, the nanostructure of soot with a higher oxygen content evolves as hollow-shell like structures while nanostructure of soot with a low oxygen content evolves to show a ribbon-like interior. This divergence in soot nanostructure based on the oxygen content of nascent soot, which in turn is shown to be a function of the fuel composition, could be used to identify the source that generated the soot sample studied. Given the lack of availability of authentic soot samples, the combination of laser heat treatment and TEM of soot to identify fuel or source is powerful when sample quantities are in the range of less than a few nanograms. Being able to identify sources and their contributions using laser derivatization of soot as a diagnostic can help optimize new or existing control measures to reduce the concentration of atmospheric soot. For instance, diesel particulate filters (DPFs) are used to reduce diesel soot emissions. Effective protocols for DPF operation can be developed by understanding soot nanostructure changes as captured soot is oxidized during passive and active DPF regeneration. Typically, O2, NO2 or a combination of the two oxidants are encountered during DPF regeneration. In this work, soot nanostructure has been shown to vary with the order of oxidants to which it is exposed, a significant finding towards optimizing DPF filter regeneration protocols. The study has been performed on authentic diesel soot in a thermogravimetric analyzer under conditions mimicking active and passive regeneration in a DPF. To validate observations with diesel soot, three carbon blacks with varying nanostructure are also subjected to oxidation by O2 and NO2. The intriguing result is that order of oxidation matters, i.e., the oxidation rates are dependent upon nanostructure changes in response to oxidation by O2 alone, or O2 with NO2.Prolonged exposure to particulate matter causes unwanted ill-health, lung dysfunctions, and breathing problems. Most toxicity studies are done using a washing, or an extract of the organic fraction of soot and cells are exposed to this extract. This work tests the adverse effect of soot on human (male) lung cells when these are exposed to surrogate soot as is, i.e., structure and chemistry intact to mimic real-time exposure conditions. The impact of soot chemistry and the presence of acidic functional groups on lung epithelial cells for varying exposure times is demonstrated in our collaborative work with the College of Medicine at Penn State, Hershey, PA. Soot chemistry is shown to directly and adversely impact cell viability and mRNA expressions of the IL-1B and IL-6 cytokines as well as mRNA expression of the TLR4 protein. Specifically, cell viability was shown to reduce significantly after 6- and 24-hours of exposure to carboxylic groups on the soot, thereby demonstrating the health impact of soot surface chemistry in comparison to extracts.In summary, soot measurement, its extensive characterization to identify source contributions and develop practically applicable control strategies has a direct implication on our health and surroundings and can aid in promoting a healthy living environment.
Author: Katherine Danielle Hutches Publisher: ISBN: 9781124223032 Category : Languages : en Pages :
Book Description
The area of fire investigation is largely dependent on the use of fire patterns and knowledge of available fuel loads to determine the cause and origin of a fire. In scenes where ignitable liquids are known to be present prior to the fire for possibly innocuous reasons, such as paint thinner and other common household supplies, it is potentially difficult to determine the order of ignition and whether the fire is incendiary in nature, or if the liquids became involved as part of an accidental fire. This suggests a need for the development of an analytical method to determine the order of ignition at a fire scene, providing fire investigators with more information about the order of events in a fire. This dissertation explains the applicability of a technique currently used in the analysis of many other types of samples, laser-induced thermal desorption coupled with Fourier transform ion cyclotron resonance mass spectrometry (LITD-FTMS), to the analysis of deposits from fire scenes. The effect of laser power density on the observed spectra from gasoline-based soot deposits is explored. A shift toward higher m/z peaks in the observed spectra was observed with a decrease in incident power density. The results at the low laser power densities suggest that LITD-FTMS is a viable method for the analysis of soot surfaces, with potential for use with layered soot samples. The ability of this technique to differentiate between soot deposits from polyurethane foam, polystyrene, and gasoline is also presented. Polyurethane soot deposits are easily distinguished from those of gasoline and polystyrene based on peaks corresponding to common pyrolysis products. Separating the soot deposits of gasoline from polystyrene is subtler, due to the occurrence of common peaks, but the application of principle component analysis, as well as visible differences in spectral distribution, makes identification of the two fuel types possible. The results of the analysis of two-layer soot samples are also presented. Some samples showed evidence of individual layer analysis with identifiable components. Other samples had extensive layer mixing, making identification of the fuel order or identity difficult. The behavior of certain fuels is discussed.
Author: Michele R. Derrick Publisher: Getty Publications ISBN: 0892364696 Category : Art Languages : en Pages : 252
Book Description
This book provides practical information on the use of infrared (IR) spectroscopy for the analysis of materials found in cultural objects. Designed for scientists and students in the fields of archaeology, art conservation, microscopy, forensics, chemistry, and optics, the book discusses techniques for examining the microscopic amounts of complex, aged components in objects such as paintings, sculptures, and archaeological fragments. Chapters include the history of infrared spectroscopy, the basic parameters of infrared absorption theory, IR instrumentation, analysis methods, sample collection and preparation, and spectra interpretation. The authors cite several case studies, such as examinations of Chumash Indian paints and the Dead Sea Scrolls. The Institute’s Tools for Conservation series provides practical scientific procedures and methodologies for the practice of conservation. The series is specifically directed to conservation scientists, conservators, and technical experts in related fields.
Author: Tibor Braun Publisher: World Scientific ISBN: 9814496596 Category : Technology & Engineering Languages : en Pages : 528
Book Description
The book is a follow-up to the computerized fullerene bibliography related to the 1985-1993 period. It is a well-indexed overview of the journal literature on a topic for which the 1996 Nobel Prize in Chemistry was awarded. It is an indispensable tool for any specialist interested in the literature of one of the most researched interdisciplinary topics in the sciences.
Author: Carlos D Garcia Publisher: Royal Society of Chemistry ISBN: 1788015339 Category : Science Languages : en Pages : 256
Book Description
Presenting the most relevant advances for employing carbon-based nanostructured materials for analytical purposes, this book serves as a reference manual that guides readers through the possibilities and helps when selecting the most appropriate material for targeted analytical applications. It critically discusses the role these nanomaterials can play in sample preparation, separation procedures and detection limit improvements whilst also considering the future trends in this field. Useful to direct initiatives, this book fills a gap in the literature for graduate students and professional researchers discussing the advantages and limitations across analytical chemistry in industry and academia.
Author: Eric Stauffer Publisher: Academic Press ISBN: 0080556264 Category : Law Languages : en Pages : 683
Book Description
The study of fire debris analysis is vital to the function of all fire investigations, and, as such, Fire Debris Analysis is an essential resource for fire investigators. The present methods of analysis include the use of gas chromatography and gas chromatography-mass spectrometry, techniques which are well established and used by crime laboratories throughout the world. However, despite their universality, this is the first comprehensive resource that addresses their application to fire debris analysis. Fire Debris Analysis covers topics such as the physics and chemistry of fire and liquid fuels, the interpretation of data obtained from fire debris, and the future of the subject. Its cutting-edge material and experienced author team distinguishes this book as a quality reference that should be on the shelves of all crime laboratories. Serves as a comprehensive guide to the science of fire debris analysis Presents both basic and advanced concepts in an easily readable, logical sequence Includes a full-color insert with figures that illustrate key concepts discussed in the text
Author: Marie Svoboda Publisher: Getty Publications ISBN: 1606066536 Category : Art Languages : en Pages : 413
Book Description
This publication presents fascinating new findings on ancient Romano-Egyptian funerary portraits preserved in international collections. Once interred with mummified remains, nearly a thousand funerary portraits from Roman Egypt survive today in museums around the world, bringing viewers face-to-face with people who lived two thousand years ago. Until recently, few of these paintings had undergone in-depth study to determine by whom they were made and how. An international collaboration known as APPEAR (Ancient Panel Paintings: Examination, Analysis, and Research) was launched in 2013 to promote the study of these objects and to gather scientific and historical findings into a shared database. The first phase of the project was marked with a two-day conference at the Getty Villa. Conservators, scientists, and curators presented new research on topics such as provenance and collecting, comparisons of works across institutions, and scientific studies of pigments, binders, and supports. The papers and posters from the conference are collected in this publication, which offers the most up-to-date information available about these fascinating remnants of the ancient world. The free online edition of this open-access publication is available at www.getty.edu/publications/mummyportraits/ and includes zoomable illustrations and graphs. Also available are free PDF, EPUB, and Kindle/MOBI downloads of the book.
Author: Neville Agnew Publisher: Getty Publications ISBN: 1606061577 Category : Art Languages : en Pages : 476
Book Description
The Mogao Grottoes, a World Heritage Site in northwestern China, are located along the ancient caravan routes—collectively known as the Silk Road—that once linked China with the West. Founded by a Buddhist monk in the late fourth century, Mogao flourished over the following millennium, as monks, local rulers, and travelers commissioned hundreds of cave temples cut into a mile-long rock cliff and adorned them with vibrant murals. More than 490 decorated grottoes remain, containing thousands of sculptures and some 45,000 square meters of wall paintings, making Mogao one of the world’s most significant sites of Buddhist art. In 1997 the Getty Conservation Institute, which had been working with the Dunhuang Academy since 1989, began a case study using the Late–Tang dynasty Cave 85 to develop a methodology that would stabilize the deteriorating wall paintings. This abundantly illustrated volume is the definitive report on the project, which was completed in 2010.
Author: Chethan Gaddam
Author: Chethan Gaddam
Author: Madhu Singh
Author: Katherine Danielle Hutches
Author: Horst Moenke
Author: Michele R. Derrick
Author: Tibor Braun
Author: Carlos D Garcia
Author: Eric Stauffer
Author: Marie Svoboda
Author: Neville Agnew