Author:
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 0
Book Description
Although considerable research has been conducted by the U.S. Army Engineer Waterways Experiment Station, U.S. Army Construction Engineering Research Laboratories, product manufacturers, and other Federal and State agencies concerning dust control, results from this body of work have been published in a number of diverse and obscure documents that are largely unavailable or inaccessible to Army environmental, safety, public works, and natural resources managers. This lack of readily available information limits the ability of Army environmental, safety, public works, and natural resources managers to make informed, cost effective decisions regarding the selection and application of appropriate dust control products with proven performance characteristics and maintenance requirements. The objective of this work was to produce a sample to use guidance document for dust control on roads, trails, and landing strips which summarizes, to the greatest extent possible, results from previous research that has experimentally documented (1) research site characteristics, (2) chemical composition of dust control products tested, (3) application rates and techniques, and (4) performance, durability, cost, and maintenance requirements. Summarized data was subsequently used to develop a dichotomous key that allows the user to select the most appropriate/environmentally acceptable dust control product based on site specific information such as climate, underlying soil types and textures, trafficked surface and aggregate material characteristics, vehicle type, anticipated traffic volumes, and length of service required.
Dust Control Guidance and Technology Selection Key
Author:
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 0
Book Description
Although considerable research has been conducted by the U.S. Army Engineer Waterways Experiment Station, U.S. Army Construction Engineering Research Laboratories, product manufacturers, and other Federal and State agencies concerning dust control, results from this body of work have been published in a number of diverse and obscure documents that are largely unavailable or inaccessible to Army environmental, safety, public works, and natural resources managers. This lack of readily available information limits the ability of Army environmental, safety, public works, and natural resources managers to make informed, cost effective decisions regarding the selection and application of appropriate dust control products with proven performance characteristics and maintenance requirements. The objective of this work was to produce a sample to use guidance document for dust control on roads, trails, and landing strips which summarizes, to the greatest extent possible, results from previous research that has experimentally documented (1) research site characteristics, (2) chemical composition of dust control products tested, (3) application rates and techniques, and (4) performance, durability, cost, and maintenance requirements. Summarized data was subsequently used to develop a dichotomous key that allows the user to select the most appropriate/environmentally acceptable dust control product based on site specific information such as climate, underlying soil types and textures, trafficked surface and aggregate material characteristics, vehicle type, anticipated traffic volumes, and length of service required.
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 0
Book Description
Although considerable research has been conducted by the U.S. Army Engineer Waterways Experiment Station, U.S. Army Construction Engineering Research Laboratories, product manufacturers, and other Federal and State agencies concerning dust control, results from this body of work have been published in a number of diverse and obscure documents that are largely unavailable or inaccessible to Army environmental, safety, public works, and natural resources managers. This lack of readily available information limits the ability of Army environmental, safety, public works, and natural resources managers to make informed, cost effective decisions regarding the selection and application of appropriate dust control products with proven performance characteristics and maintenance requirements. The objective of this work was to produce a sample to use guidance document for dust control on roads, trails, and landing strips which summarizes, to the greatest extent possible, results from previous research that has experimentally documented (1) research site characteristics, (2) chemical composition of dust control products tested, (3) application rates and techniques, and (4) performance, durability, cost, and maintenance requirements. Summarized data was subsequently used to develop a dichotomous key that allows the user to select the most appropriate/environmentally acceptable dust control product based on site specific information such as climate, underlying soil types and textures, trafficked surface and aggregate material characteristics, vehicle type, anticipated traffic volumes, and length of service required.
Dust Control Guidance and Technology Selection Key
Author: Dick L. Gebhart
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 31
Book Description
Although considerable research has been conducted by the U.S. Army Engineer Waterways Experiment Station, U.S. Army Construction Engineering Research Laboratories, product manufacturers, and other Federal and State agencies concerning dust control, results from this body of work have been published in a number of diverse and obscure documents that are largely unavailable or inaccessible to Army environmental, safety, public works, and natural resources managers. This lack of readily available information limits the ability of Army environmental, safety, public works, and natural resources managers to make informed, cost effective decisions regarding the selection and application of appropriate dust control products with proven performance characteristics and maintenance requirements. The objective of this work was to produce a sample to use guidance document for dust control on roads, trails, and landing strips which summarizes, to the greatest extent possible, results from previous research that has experimentally documented (1) research site characteristics, (2) chemical composition of dust control products tested, (3) application rates and techniques, and (4) performance, durability, cost, and maintenance requirements. Summarized data was subsequently used to develop a dichotomous key that allows the user to select the most appropriate/environmentally acceptable dust control product based on site specific information such as climate, underlying soil types and textures, trafficked surface and aggregate material characteristics, vehicle type, anticipated traffic volumes, and length of service required.
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 31
Book Description
Although considerable research has been conducted by the U.S. Army Engineer Waterways Experiment Station, U.S. Army Construction Engineering Research Laboratories, product manufacturers, and other Federal and State agencies concerning dust control, results from this body of work have been published in a number of diverse and obscure documents that are largely unavailable or inaccessible to Army environmental, safety, public works, and natural resources managers. This lack of readily available information limits the ability of Army environmental, safety, public works, and natural resources managers to make informed, cost effective decisions regarding the selection and application of appropriate dust control products with proven performance characteristics and maintenance requirements. The objective of this work was to produce a sample to use guidance document for dust control on roads, trails, and landing strips which summarizes, to the greatest extent possible, results from previous research that has experimentally documented (1) research site characteristics, (2) chemical composition of dust control products tested, (3) application rates and techniques, and (4) performance, durability, cost, and maintenance requirements. Summarized data was subsequently used to develop a dichotomous key that allows the user to select the most appropriate/environmentally acceptable dust control product based on site specific information such as climate, underlying soil types and textures, trafficked surface and aggregate material characteristics, vehicle type, anticipated traffic volumes, and length of service required.
Dust Control for Roads, Airfields, and Adjacent Areas
Author: U S Army
Publisher:
ISBN: 9781410219619
Category : Technology & Engineering
Languages : en
Pages : 48
Book Description
This manual provides guidance for dust control methods and materials that can be used successfully at airfields and heliports to stop dust from forming naturally or as a result of man's activities and to control dust in areas directly impacted by man's activities. Dust develops naturally in denuded or sparsely vegetated areas and in most unpaved, sparsely vegetated areas occupied by man. (Man's activities may be detrimental to existing vegetation and create a dust problem.) Dust is created in unsurfaced areas subjected to concentrated foot or vehicular traffic, and is usually a problem on shoulders of surfaced airport and heliport traffic areas. Dust control becomes desirable when man needs to occupy land areas adjacent to the dust producing areas or is required to conceal military activities. The control of dust is also an important factor to consider for lengthening the life of vehicles and their engines. This manual discusses dust control methods and materials that have proven effective for treating soil surfaces to reduce dust; provides suggestions for rates and methods of application of materials for various soil types and environmental conditions; and discusses factors, such as availability, curing time, durability, logistics, and economics, that may be significant in the ultimate choice of material. Economic solutions for dust control of very large areas with little or no vegetation and no direct impact from man are presented in an appendix.
Publisher:
ISBN: 9781410219619
Category : Technology & Engineering
Languages : en
Pages : 48
Book Description
This manual provides guidance for dust control methods and materials that can be used successfully at airfields and heliports to stop dust from forming naturally or as a result of man's activities and to control dust in areas directly impacted by man's activities. Dust develops naturally in denuded or sparsely vegetated areas and in most unpaved, sparsely vegetated areas occupied by man. (Man's activities may be detrimental to existing vegetation and create a dust problem.) Dust is created in unsurfaced areas subjected to concentrated foot or vehicular traffic, and is usually a problem on shoulders of surfaced airport and heliport traffic areas. Dust control becomes desirable when man needs to occupy land areas adjacent to the dust producing areas or is required to conceal military activities. The control of dust is also an important factor to consider for lengthening the life of vehicles and their engines. This manual discusses dust control methods and materials that have proven effective for treating soil surfaces to reduce dust; provides suggestions for rates and methods of application of materials for various soil types and environmental conditions; and discusses factors, such as availability, curing time, durability, logistics, and economics, that may be significant in the ultimate choice of material. Economic solutions for dust control of very large areas with little or no vegetation and no direct impact from man are presented in an appendix.
Integrated Waste Management
Author: Sunil Kumar
Publisher: BoD – Books on Demand
ISBN: 9533074698
Category : Technology & Engineering
Languages : en
Pages : 552
Book Description
This book reports research on policy and legal issues, anaerobic digestion of solid waste under processing aspects, industrial waste, application of GIS and LCA in waste management, and a couple of research papers relating to leachate and odour management.
Publisher: BoD – Books on Demand
ISBN: 9533074698
Category : Technology & Engineering
Languages : en
Pages : 552
Book Description
This book reports research on policy and legal issues, anaerobic digestion of solid waste under processing aspects, industrial waste, application of GIS and LCA in waste management, and a couple of research papers relating to leachate and odour management.
Consumers Guide to Dust Control Technologies
Author: John P. Zaniewski
Publisher:
ISBN:
Category : Dust control
Languages : en
Pages : 84
Book Description
Publisher:
ISBN:
Category : Dust control
Languages : en
Pages : 84
Book Description
Dust and Fume Control
Author: David M. Muir
Publisher: IChemE
ISBN: 9780852952870
Category : Technology & Engineering
Languages : en
Pages : 178
Book Description
Publisher: IChemE
ISBN: 9780852952870
Category : Technology & Engineering
Languages : en
Pages : 178
Book Description
Enhanced Training and Operations at the National Guard Training Center at Fort Indiantown Gap
Transformation of the 2nd Brigade, 25th Infantry Division (L) to a Stryker Brigade Combat Team in Hawai'i
Fugitive Dust Control Technology
Author:
Publisher:
ISBN: 9780815509332
Category : Dust control
Languages : en
Pages : 534
Book Description
Publisher:
ISBN: 9780815509332
Category : Dust control
Languages : en
Pages : 534
Book Description
Dust Control Handbook
Author: V. Mody
Publisher: William Andrew
ISBN:
Category : Medical
Languages : en
Pages : 224
Book Description
Consolidates information developed by industry and government laboratories on dust control engineering techniques. Designed for the minerals processing industry, the technology applies to other industries as well. Dust, its prevention, formation and control are examined, including wet and dry control systems, personal protection, and testing methods.
Publisher: William Andrew
ISBN:
Category : Medical
Languages : en
Pages : 224
Book Description
Consolidates information developed by industry and government laboratories on dust control engineering techniques. Designed for the minerals processing industry, the technology applies to other industries as well. Dust, its prevention, formation and control are examined, including wet and dry control systems, personal protection, and testing methods.