Development of Simplified Analysis Procedure for Piles in Laterally Spreading Layered Soils PDF Download

Author: Christopher R. McGann
Publisher:
ISBN:
Category :
Languages : en
Pages : 173

View

Book Description

Author: Rui Wang
Publisher: Springer
ISBN: 3662496631
Category : Science
Languages : en
Pages : 131

View

Book Description
This thesis focuses on the seismic response of piles in liquefiable ground. It describes the design of a three-dimensional, unified plasticity model for large post-liquefaction shear deformation of sand, formulated and implemented for parallel computing. It also presents a three-dimensional, dynamic finite element analysis method for piles in liquefiable ground, developed on the basis of this model,. Employing a combination of case analysis, centrifuge shaking table experiments and numerical simulations using the proposed methods, it demonstrates the seismic response patterns of single piles in liquefiable ground. These include basic force-resistance mode, kinematic and inertial interaction coupling mechanism and major influence factors. It also discusses a beam on the nonlinear Winkler foundation (BNWF) solution and a modified neutral plane solution developed and validated using centrifuge experiments for piles in consolidating and reconsolidating ground. Lastly, it studies axial pile force and settlement during post-earthquake reconsolidation, showing pile axial force to be irrelevant in the reconsolidation process, while settlement is process dependent.

Author: Dipanjan Basu
Publisher: Purdue University Press
ISBN: 9781622601264
Category : Transportation
Languages : en
Pages : 152

View

Book Description
This report focuses on the development of a new method of analysis of laterally loaded piles embedded in a multi-layered soil deposit treated as a three-dimensional continuum. Assuming that soil behaves as a linear elastic material, the governing differential equations for the deflection of laterally loaded piles were obtained using energy principles and calculus of variations. The differential equations were solved using both the method of initial parameters and numerical techniques. Soil resistance, pile deflection, slope of the deflected pile, bending moment and shear force can be easily obtained at any depth along the entire pile length. The results of the analysis were in very good agreement with three-dimensional finite element analysis results. The analysis was further extended to account for soil nonlinearity. A few simple constitutive relationships that allow for modulus degradation with increasing strain were incorporated into the analysis. The interaction of piles in groups was also studied.

Author: Wei Dong Guo
Publisher: CRC Press
ISBN: 1003806465
Category : Technology & Engineering
Languages : en
Pages : 276

View

Book Description
This book presents models that capture the nonlinear response of piles subjected to lateral forces. Utilising a consistent approach encompassing new mathematical models, it offers solutions presented as closed-form expressions and underpinned by the same set of 3-5 measurable soil-input parameters. These focus on nonlinear response of mono piles, anchored piles, pile groups, and torsional piles, as well as passive piles subjected to soil movement induced in shearing, sliding slopes or excavation, and earthquake shaking. The models can also be used for pipelines and similar beam structures. Solutions are provided in the form of design charts, with each parameter obtained using available test data and illustrated with real-world cases. The models reveal, for the first time, the mysterious mechanisms of amplification resulting from back-rotation, which have incurred the collapse of structures such as the Showa Bridge and Nicoll Highway, as well as the distortion of piles during earthquakes. Advanced Design of Pile Foundations Under Lateral Loading is ideal for practicing foundation engineers and students at graduate level. Wei Dong Guo is co-founder of Hans Innovation Group and former Associate Professor at the University of Wollongong, Australia. He is a Chartered Professional Engineer and is a Fellow of Engineers Australia by whom he was awarded the 2012 Warren Medal.

Author: Amir M. Kaynia
Publisher: CRC Press
ISBN: 1000398587
Category : Technology & Engineering
Languages : en
Pages : 401

View

Book Description
This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.

Author: Ahmed Amr Ebeido
Publisher:
ISBN:
Category :
Languages : en
Pages : 485

View

Book Description
Current techniques for assessing the effects of liquefaction-induced lateral spreading on pile foundations are based on simplified analytical methods that potentially lead to estimates that vary within a wide range. This might lead to potential excessive design demands, with high expenses for pre-event mitigation. Conversely, underestimated design demands might lead to costly post-event damage remediation. The conducted study is directed towards enhancements to the assessment of liquefaction induced lateral spreading effects on bridge foundation systems. Current simplified analysis techniques have been only been developed recently in preliminary form. In addition, quantitative data sets from large-scale experimentation are needed concerning the response of such ground-foundation scenarios. An effort was undertaken to address the simplified method areas of applicability and potential for enhancements. Challenges in implementing the methodology are presented within a comparative scope contrasting results of a California bridge site from different studies. On this basis, insights are derived for improvement of the currently employed simplified analysis guidelines. Furthermore, large scale shake table testing was performed on pile foundation-ground systems, under conditions of liquefaction-induced lateral spreading. A total of 7 different experiments were conducted with varying heights, ground inclination, soil profiles, pile material and cross-section. The tested models were densely instrumented, including strain gauges, total pressure and excess pore-pressure sensors, accelerometers and displacement pots. In addition, data from 4 different experiments conducted in the NIED Japan shake table facility, including single piles and pile groups and varying soil profiles were utilized to provide additional insights and characteristics. In these tests, the laminar soil container was placed in a mildly-inclined configuration to allow for accumulation of the liquefaction-induced lateral deformations. Detailed instrumentation and data interpretation procedures enable measurement of the fundamental soil-pile interaction behavior. The loading mechanisms have large cyclic components that may act in-phase or out-of-phase along the pile embedded length. The conducted heavily instrumented tests resulted in a wealth of quantitative response data sets, to be used for: i) drawing insights and recommendations of practical significance based directly on the observed response, ii) calibration of simplified and more elaborate computational analysis tools, and iii) enhancement of our design guidelines and practical assessment procedures. Monotonic pushover analysis based on newly derived p-y curves in this study is found to provide useful design estimates in good agreement with the observed experimental results.

Author: Gopal Madabhushi
Publisher: Imperial College Press
ISBN: 1848163630
Category : Science
Languages : en
Pages : 232

View

Book Description
Pile foundations are the most common form of deep foundations that are used both onshore and offshore to transfer large superstructural loads into competent soil strata. This book provides many case histories of failure of pile foundations due to earthquake loading and soil liquefaction. Based on the observed case histories, the possible mechanisms of failure of the pile foundations are postulated. The book also deals with the additional loading attracted by piles in liquefiable soils due to lateral spreading of sloping ground. Recent research at Cambridge forms the backbone of this book with the design methodologies being developed directly based on quantified centrifuge test results and numerical analysis. The book provides designers and practicing civil engineers with a sound knowledge of pile behaviour in liquefiable soils and easy-to-use methods to design pile foundations in seismic regions. For graduate students and researchers, it brings together the latest research findings on pile foundations in a way that is relevant to geotechnical practice. Sample Chapter(s). Foreword (85 KB). Chapter 1: Performance of Pile Foundations (4,832 KB). Contents: Performance of Pile Foundations; Inertial and Kinematic Loading; Accounting for Axial Loading in Level Ground; Lateral Spreading of Sloping Ground; Axial Loading on Piles in Laterally Spreading Ground; Design Examples. Readership: Researchers, academics, designers and graduate students in earthquake engineering, civil engineering and ocean/coastal engineering.

Author: Lymon C Reese
Publisher: CRC Press
ISBN: 9789058093486
Category : Technology & Engineering
Languages : en
Pages : 484

View

Book Description
Guiding the professional through the complexities of lateral-load design, this book and CD-ROM combination introduces the procedures involved in piles and pile group design. This is a problem that can only be solved by accounting for the soil resistance as related to the lateral deflection of the pile. Intricate equations are derived and fully explained, enabling the designer to find the critical loads, either causing a pile to be overloaded or causing too much lateral deflection. The CD-ROM contains simplified versions of two required programs that allow the reader to check the solutions of some of the examples given in the book and to find answers to related problems.

Author: National Academies of Sciences, Engineering, and Medicine
Publisher:
ISBN: 9780309440271
Category :
Languages : en
Pages : 350

View

Book Description
Earthquake-induced soil liquefaction (liquefaction) is a leading cause of earthquake damage worldwide. Liquefaction is often described in the literature as the phenomena of seismic generation of excess porewater pressures and consequent softening of granular soils. Many regions in the United States have been witness to liquefaction and its consequences, not just those in the west that people associate with earthquake hazards. Past damage and destruction caused by liquefaction underline the importance of accurate assessments of where liquefaction is likely and of what the consequences of liquefaction may be. Such assessments are needed to protect life and safety and to mitigate economic, environmental, and societal impacts of liquefaction in a cost-effective manner. Assessment methods exist, but methods to assess the potential for liquefaction triggering are more mature than are those to predict liquefaction consequences, and the earthquake engineering community wrestles with the differences among the various assessment methods for both liquefaction triggering and consequences. State of the Art and Practice in the Assessment of Earthquake-Induced Soil Liquefaction and Its Consequences evaluates these various methods, focusing on those developed within the past 20 years, and recommends strategies to minimize uncertainties in the short term and to develop improved methods to assess liquefaction and its consequences in the long term. This report represents a first attempt within the geotechnical earthquake engineering community to consider, in such a manner, the various methods to assess liquefaction consequences.

Author: Nawawi Chouw
Publisher: CRC Press
ISBN: 1351665693
Category : Technology & Engineering
Languages : en
Pages : 190

View

Book Description
Seismic Performance of Soil-Foundation-Structure Systems presents invited papers presented at the international workshop (University of Auckland, New Zealand, 21-22 November 2016). This international workshop brought together outstanding work in earthquake engineering that embraces a holistic consideration of soilfoundation-structure systems. For example, the diversity of papers in this volume is represented by contributions from the fields of shallow foundation in liquefiable soil, spatially distributed lifelines, bridges, clustered structures (see photo on front cover), sea floor seismic motion, multi-axial ground excitation, deep foundations, soil-foundation-structurefluid interaction, liquefaction-induced settlement and uplift with SFSI. A fundamental knowledge gap is manifested by the isolated manner geotechnical and structural engineers work. A holistic consideration of soil-foundation-structures systems is only possible if civil engineers work collaboratively to the mutual benefit of all disciplines. Another gap occurs by the retarded application of up-to-date research findings in engineering design practices. Seismic Performance of Soil-Foundation-Structure Systems is the outcome from the recognized need to close this gap, since it has been observed that a considerable delay exists between published research findings and application of the principles revealed by the research. Seismic Performance of Soil-Foundation-Structure Systems will be helpful in developing more understanding of the complex nature of responses these systems present under strong earthquakes, and will assist engineers in closing the gaps identified above.