Delayed hydride cracking (dhc) velocity (axial) at 250 degrees c for zr-2.5nb cezus pressure tube materials PDF Download

Author: R. Choubey
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

View

Book Description

Author: R. Choubey
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

View

Book Description

Author: A. K. Jarvine
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

View

Book Description

Author: International Atomic Energy Agency
Publisher: IAEA
ISBN:
Category : Business & Economics
Languages : en
Pages : 102

View

Book Description
Dated October 2004. With CD-ROM containing additional information inside back cover

Author: Christopher E. Coleman
Publisher:
ISBN:
Category : Delayed hydride cracking
Languages : en
Pages : 23

View

Book Description
Values of DHC rates in Zr alloys are sensitive to measurement procedures. A standard method has been developed at the laboratories of AECL and evaluated in a round-robin involving ten IAEA member states. Two test materials were used--Zr-2.5Nb pressure tubes in the cold-worked (CANDUTM) and heat-treated (RBMK) conditions. Cracks were grown from fatigued starter cracks in the axial direction on the axial-radial plane of the original tubes. To obtain the maximum value of Vc, specimens were heated to dissolve all their hydrogen, then cooled at 1 to 3°C/min to the test temperature before loading at 15 MPa?m. Although the start of cracking was detected by potential drop, the extent of cracking was measured directly on the crack faces. The values of incubation time to the start of cracking were highly variable but Vc was well behaved. The values of Vc were normally distributed with a range varying from a factor of 1.2 to 5.2. At 250°C the mean value of Vc from 80 specimens of cold-worked material was 8.9(±1.12)x10-8 m/s and from 41 specimens of heat-treated material the mean value of Vc was3.3(±0.64)x10-8 m/s. Tests were also done at six other temperatures between 144 and 283°C, using up to 22 specimens at each temperature. Both materials had an Arrhenius-type temperature dependence, Vc=Aexp(-Q/RT). The use of strictly defined and coordinated experimental procedures gave a consistent set of Vc values, allowing effective comparison of results obtained in different national laboratories and resulting in good correlations between the DHC velocity values and differences in strength, crystallographic texture, and distribution of ?-phase in the test materials.

Author: A. K. Jarvine
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

View

Book Description

Author: International Atomic Energy Agency
Publisher:
ISBN:
Category :
Languages : en
Pages : 199

View

Book Description
This report describes all of the research work undertaken as part of the IAEA coordinated research program on hydrogen and hydride induced degradation of the mechanical and physical properties of zirconium based alloys, and includes a review of the state of the art in understanding crack propagation by Delayed Hydride Cracking (DHC), and details of the experimental procedures that have produced the most consistent set of DHC rates reported in an international round-robin exercise to this date.

Author: Manfred P. Puls
Publisher: Springer Science & Business Media
ISBN: 1447141954
Category : Science
Languages : en
Pages : 475

View

Book Description
By drawing together the current theoretical and experimental understanding of the phenomena of delayed hydride cracking (DHC) in zirconium alloys, The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components: Delayed Hydride Cracking provides a detailed explanation focusing on the properties of hydrogen and hydrides in these alloys. Whilst the emphasis lies on zirconium alloys, the combination of both the empirical and mechanistic approaches creates a solid understanding that can also be applied to other hydride forming metals. This up-to-date reference focuses on documented research surrounding DHC, including current methodologies for design and assessment of the results of periodic in-service inspections of pressure tubes in nuclear reactors. Emphasis is placed on showing how our understanding of DHC is supported by progress in general understanding of such broad fields as the study of hysteresis associated with first order phase transformations, phase relationships in coherent crystalline metallic solids, the physics of point and line defects, diffusion of substitutional and interstitial atoms in crystalline solids, and continuum fracture and solid mechanics. Furthermore, an account of current methodologies is given illustrating how such understanding of hydrogen, hydrides and DHC in zirconium alloys underpins these methodologies for assessments of real life cases in the Canadian nuclear industry. The all-encompassing approach makes The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Component: Delayed Hydride Cracking an ideal reference source for students, researchers and industry professionals alike.

Author: Ravi Kumar Sundaramoorthy
Publisher:
ISBN:
Category :
Languages : en
Pages : 280

View

Book Description
Pressure tubes pick up hydrogen while they are in service within CANDU reactors. Sufficiently high hydrogen concentration can lead to hydride precipitation during reactor shutdown/repair at flaws, resulting in the potential for eventual rupture of the pressure tubes by a process called Delayed Hydride Cracking (DHC). The threshold stress intensity factor (KIH) below which the cracks will not grow by delayed hydride cracking of Zr-2.5Nb micro pressure tubes (MPTs) has been determined using a load increasing mode (LIM) method at different temperatures. MPTs have been used to allow easy study of the impact of properties like texture and grain size on DHC. Previous studies on MPTs have focused on creep and effects of stress on hydride orientation; here the use of MPTs for DHC studies is confirmed for the first time. Micro pressure tube samples were hydrided to a target hydrogen content of 100 ppm using an electrolytic method. For DHC testing, 3 mm thick half ring samples were cut out from the tubes using Electrical Discharge Machining (EDM) with a notch at the center. A sharp notch with a root radius of 15 mu m was introduced by broaching to facilitate crack initiation. The direct current potential drop method was used to monitor crack growth during the DHC tests. For the temperature range tested the threshold stress intensity factors for the micro pressure tube used were found to be 6.5-10.5 MPa.m1/2 with the value increasing with increasing temperature. The average DHC velocities obtained for the three different test temperatures 180, 230 and 250oC were 2.64, 10.87 and 8.45 x 10-8 m/s, respectively. The DHC data obtained from the MPTs are comparable to the data published in the literature for full sized CANDU pressure tubes.

Author: Douglas Keith Rodgers
Publisher:
ISBN:
Category : CANDU reactors
Languages : en
Pages : 282

View

Book Description
Delayed Hydride Cracking (DHC) occurs in Zr-2.5Nb when certain requirements are met. The mechanism of DHC consists of diffusion of hydrogen to a stress concentrator, such as a crack-tip, precipitation then fracture of a hydride at the crack-tip, and repetition of the process; the crack advances in steps. Incubation times, to the start of cracking and crack-tip hydride morphologies have been measured in pre-cracked cantilever beam specimens tested at applied K$\rm\sb I$'s up to 20 MPam$\sp{1/2}$ and temperatures ranging from 100 to 250$\sp\circ$C. The incubation time for DHC was found to vary inversely with DHC velocity. Contrary to previous research, the incubation time is highly variable, even for a given temperature and applied K$\rm\sb I,$ and the crack-tip hydride morphology is much more complicated than the simple model of a single hydride at a crack-tip.