Author: EJ. Czyryca
Publisher:
ISBN:
Category : Corrosion fatigue
Languages : en
Pages : 22
Book Description
Fatigue crack-growth rate tests of cast NAB and NAB weld metal specimens were conducted to determine the threshold for fatigue crack growth (?Kth). The tests were conducted in accordance with ASTM E 647, Standard Test Method for Measurement of Fatigue Crack Growth Rates, in artificial seawater at a cyclic frequency of 2 Hz at R-ratios of +0.05, +0.40, and +0.60. The specimens were machined from both poor and good quality, as-cast NAB. Production NAB weldments were used for NAB weld metal specimens.
Corrosion Fatigue Crack Growth Thresholds for Cast Nickel-Aluminum Bronze and Welds
Author: EJ. Czyryca
Publisher:
ISBN:
Category : Corrosion fatigue
Languages : en
Pages : 22
Book Description
Fatigue crack-growth rate tests of cast NAB and NAB weld metal specimens were conducted to determine the threshold for fatigue crack growth (?Kth). The tests were conducted in accordance with ASTM E 647, Standard Test Method for Measurement of Fatigue Crack Growth Rates, in artificial seawater at a cyclic frequency of 2 Hz at R-ratios of +0.05, +0.40, and +0.60. The specimens were machined from both poor and good quality, as-cast NAB. Production NAB weldments were used for NAB weld metal specimens.
Publisher:
ISBN:
Category : Corrosion fatigue
Languages : en
Pages : 22
Book Description
Fatigue crack-growth rate tests of cast NAB and NAB weld metal specimens were conducted to determine the threshold for fatigue crack growth (?Kth). The tests were conducted in accordance with ASTM E 647, Standard Test Method for Measurement of Fatigue Crack Growth Rates, in artificial seawater at a cyclic frequency of 2 Hz at R-ratios of +0.05, +0.40, and +0.60. The specimens were machined from both poor and good quality, as-cast NAB. Production NAB weldments were used for NAB weld metal specimens.
Fatigue Crack Growth Thresholds, Endurance Limits, and Design
Author: J. C. Newman
Publisher: ASTM International
ISBN: 0803126247
Category : Fatigue
Languages : en
Pages : 436
Book Description
Annotation Contains 24 papers from the November, 1998 symposium of the same name, sponsored by the ASTM Committee E8 on Fatigue and Fracture, and presented by Newman and Piascik (both of the NASA Langley Research Center). The papers focus on such areas as fatigue-crack growth threshold mechanisms, loading and specimen-type effects, analyses of fatigue-crack-growth-threshold behavior, and applications of threshold concepts and endurance limits to aerospace and structural materials. Annotation copyrighted by Book News, Inc., Portland, OR.
Publisher: ASTM International
ISBN: 0803126247
Category : Fatigue
Languages : en
Pages : 436
Book Description
Annotation Contains 24 papers from the November, 1998 symposium of the same name, sponsored by the ASTM Committee E8 on Fatigue and Fracture, and presented by Newman and Piascik (both of the NASA Langley Research Center). The papers focus on such areas as fatigue-crack growth threshold mechanisms, loading and specimen-type effects, analyses of fatigue-crack-growth-threshold behavior, and applications of threshold concepts and endurance limits to aerospace and structural materials. Annotation copyrighted by Book News, Inc., Portland, OR.
The Growth of Small Corrosion Fatigue Cracks in Alloy 2024
Author: Robert S. Piascik
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 34
Book Description
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 34
Book Description
Stress-corrosion Cracking in High Strength Steels and in Titanium and Aluminum Alloys
Author: Benjamin Floyd Brown
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 390
Book Description
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 390
Book Description
Corrosion Fatigue Initiation and Short Crack Growth in an Aluminum Alloy
Author: Yen-How Huang
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 332
Book Description
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 332
Book Description
Cast and Wrought Aluminium Bronzes
Author: Harry Meigh
Publisher: CRC Press
ISBN: 1351462377
Category : Science
Languages : en
Pages : 413
Book Description
Continuous casting of non-ferrous metals has been practised for well over 100 years. It has many advantages over static ingot and book mould casting, the most important being improved yield, reduced energy consumption and reduction of manpower, with a consequent reduction in cost. This book shows how the prrocess can be used in an engineering environment for casting a wide range of copper based alloys and precious metals, including gold and silver, and selected nickel alloys.
Publisher: CRC Press
ISBN: 1351462377
Category : Science
Languages : en
Pages : 413
Book Description
Continuous casting of non-ferrous metals has been practised for well over 100 years. It has many advantages over static ingot and book mould casting, the most important being improved yield, reduced energy consumption and reduction of manpower, with a consequent reduction in cost. This book shows how the prrocess can be used in an engineering environment for casting a wide range of copper based alloys and precious metals, including gold and silver, and selected nickel alloys.
Near-Threshold Fatigue Crack Growth Behavior of Fine-Grain Nickel-Based Alloys
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781721587025
Category :
Languages : en
Pages : 28
Book Description
Constant-Kmax fatigue crack growth tests were performed on two finegrain nickel-base alloys Inconel 718 (DA) and Ren 95 to determine if these alloys exhibit near-threshold time-dependent crack growth behavior observed for fine-grain aluminum alloys in room-temperature laboratory air. Test results showed that increases in K(sub max) values resulted in increased crack growth rates, but no evidence of time-dependent crack growth was observed for either nickel-base alloy at room temperature. Newman, John A. and Piascik, Robert S. Langley Research Center NASA/TM-2003-212443, NAS 1.15:212443, L-18314, ARL-TR-3021
Publisher: Createspace Independent Publishing Platform
ISBN: 9781721587025
Category :
Languages : en
Pages : 28
Book Description
Constant-Kmax fatigue crack growth tests were performed on two finegrain nickel-base alloys Inconel 718 (DA) and Ren 95 to determine if these alloys exhibit near-threshold time-dependent crack growth behavior observed for fine-grain aluminum alloys in room-temperature laboratory air. Test results showed that increases in K(sub max) values resulted in increased crack growth rates, but no evidence of time-dependent crack growth was observed for either nickel-base alloy at room temperature. Newman, John A. and Piascik, Robert S. Langley Research Center NASA/TM-2003-212443, NAS 1.15:212443, L-18314, ARL-TR-3021
Near-threshold Corrosion
Corrosion Fatigue Crack Propagation in Metals
Author: Richard P. Gangloff
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 208
Book Description
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 208
Book Description
Threshold Corrosion Fatigue Crack Growth in Steels
Author: LKL Tu
Publisher:
ISBN:
Category : Corrosion fatigue
Languages : en
Pages : 9
Book Description
The threshold stress intensity factor range ?Kth of three steels was studied in air and steam. Constant load and constant crack opening displacement (COD) tests were conducted by using tension-tension sinusoidal wave function loading. The COD tests were controlled by a high frequency clip-on strain gage. Crack growth rate was measured by both optical and COD compliance techniques and verified by metallographic examination of the broken specimens. The ?Kth value was determined as the asymptote to the best-fit data below a crack growth rate of 2.5 x 10-8 cm/cycle. The ?Kth values were higher in steam than in air. Crack growth rates in air and steam generally crossover or merge in the range of 2.5 x 10-6 to 2.5 x 10-7 cm/cycle; below this range the growth rate is lower in steam than in air. The higher values in steam tests were explained by environmentally assisted crack branching and corrosion products formed at the crack tip after long-time testing at growth rates of less than one lattice spacing per cycle of loading.
Publisher:
ISBN:
Category : Corrosion fatigue
Languages : en
Pages : 9
Book Description
The threshold stress intensity factor range ?Kth of three steels was studied in air and steam. Constant load and constant crack opening displacement (COD) tests were conducted by using tension-tension sinusoidal wave function loading. The COD tests were controlled by a high frequency clip-on strain gage. Crack growth rate was measured by both optical and COD compliance techniques and verified by metallographic examination of the broken specimens. The ?Kth value was determined as the asymptote to the best-fit data below a crack growth rate of 2.5 x 10-8 cm/cycle. The ?Kth values were higher in steam than in air. Crack growth rates in air and steam generally crossover or merge in the range of 2.5 x 10-6 to 2.5 x 10-7 cm/cycle; below this range the growth rate is lower in steam than in air. The higher values in steam tests were explained by environmentally assisted crack branching and corrosion products formed at the crack tip after long-time testing at growth rates of less than one lattice spacing per cycle of loading.