Author: David Christopher Gilmer
Publisher:
ISBN:
Category :
Languages : en
Pages : 314

View

Book Description

Author: Polly Wanda Chu
Publisher:
ISBN:
Category :
Languages : en
Pages : 434

View

Book Description
Thin titanium dioxide films were produced by metalorganic chemical vapor deposition on sapphire(0001) in an ultrahigh vacuum (UHV) chamber. A method was developed for producing controlled submonolayer depositions from titanium isopropoxide precursor. Film thickness ranged from 0.1 to 2.7 nm. In situ X-ray photoelectron spectroscopy (XPS) was used to determine film stoichiometry with increasing thickness. The effect of isothermal annealing on desorption was evaluated. Photoelectron peak shapes and positions from the initial monolayers were analyzed for evidence of interface reaction. Deposition from titanium isopropoxide is divided into two regimes: depositions below and above the pyrolysis temperature. This temperature was determined to be 300 deg C. Controlled submonolayers of titanium oxide were produced by cycles of dosing with titanium isopropoxide vapor below and annealing above 300 deg C. Precursor adsorption below the pyrolysis temperature was observed to saturate after 15 minutes of dosing. The quantity absorbed was shown to have an upper limit of one monolayer. The stoichiometry of thin films grown by the cycling method were determined to be TiO2. Titanium dioxide film stoichiometry was unaffected by isothermal annealing at 700 deg C. Annealing produced a decrease in film thickness. This was explained as due to desorption. Desorption ceased at approximately 2.5 to 3 monolayers, suggesting bonding of the initial monolayers of film to sapphire is stronger than to itself. Evidence of sapphire reduction at the interface by the depositions was not observed. The XPS O is peak shifted with increased film thickness. The shifts were consistent with oxygen in sapphire and titanium dioxide having different O is photoelectron peak positions. Simulations showed the total shifts for thin films ranging in thickness of 0.1 to 2.7 nm to be -0.99 to -1.23 eV. Thick films were produced for comparison.

Author: Theodor Schneller
Publisher: Springer Science & Business Media
ISBN: 3211993118
Category : Technology & Engineering
Languages : en
Pages : 801

View

Book Description
This is the first text to cover all aspects of solution processed functional oxide thin-films. Chemical Solution Deposition (CSD) comprises all solution based thin- film deposition techniques, which involve chemical reactions of precursors during the formation of the oxide films, i. e. sol-gel type routes, metallo-organic decomposition routes, hybrid routes, etc. While the development of sol-gel type processes for optical coatings on glass by silicon dioxide and titanium dioxide dates from the mid-20th century, the first CSD derived electronic oxide thin films, such as lead zirconate titanate, were prepared in the 1980’s. Since then CSD has emerged as a highly flexible and cost-effective technique for the fabrication of a very wide variety of functional oxide thin films. Application areas include, for example, integrated dielectric capacitors, ferroelectric random access memories, pyroelectric infrared detectors, piezoelectric micro-electromechanical systems, antireflective coatings, optical filters, conducting-, transparent conducting-, and superconducting layers, luminescent coatings, gas sensors, thin film solid-oxide fuel cells, and photoelectrocatalytic solar cells. In the appendix detailed “cooking recipes” for selected material systems are offered.

Author: Daniel Dobkin
Publisher: Springer Science & Business Media
ISBN: 9781402012488
Category : Technology & Engineering
Languages : en
Pages : 298

View

Book Description
Principles of Chemical Vapor Deposition provides a simple introduction to heat and mass transfer, surface and gas phase chemistry, and plasma discharge characteristics. In addition, the book includes discussions of practical films and reactors to help in the development of better processes and equipment. This book will assist workers new to chemical vapor deposition (CVD) to understand CVD reactors and processes and to comprehend and exploit the literature in the field. The book reviews several disparate fields with which many researchers may have only a passing acquaintance, such as heat and mass transfer, discharge physics, and surface chemistry, focusing on key issues relevant to CVD. The book also examines examples of realistic industrial reactors and processes with simplified analysis to demonstrate how to apply the principles to practical situations. The book does not attempt to exhaustively survey the literature or to intimidate the reader with irrelevant mathematical apparatus. This book is as simple as possible while still retaining the essential physics and chemistry. The book is generously illustrated to assist the reader in forming the mental images which are the basis of understanding.

Author: Peter M. Martin
Publisher: William Andrew
ISBN: 0815520328
Category : Technology & Engineering
Languages : en
Pages : 932

View

Book Description
This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.

Author: Hans Bach
Publisher: Springer Science & Business Media
ISBN: 3662034751
Category : Technology & Engineering
Languages : en
Pages : 445

View

Book Description
This book, entitled Thin Films on Glass, is one of a series reporting on research and development activities on products and processes conducted by the Schott Group. The scientifically founded development of new products and technical pro cesses has traditionally been of vital importance to Schott and has always been performed on a scale determined by the prospects for application of our special glasses. Since the reconstruction of the Schott Glaswerke in Mainz, the scale has increased enormously. The range of expert knowledge required could never have been supplied by Schott alone. It is also a tradition in our company to cultivate collaboration with customers, universities, and research institutes. Publications in numerous technical journals, which since 1969 we have edited to a regular schedule as Forschungsberichte - 'research reports' - describe the results of these cooperations. They contain up-to-date infor mation on various topics for the expert but are not suited as survey material for those whose standpoint is more remote. This is the point where we would like to place our series, to stimulate the exchange of thoughts, so that we can consider from different points of view the possibilities offered by those incredibly versatile materials, glass and glass ceramics. We would like to share the knowledge won through our research and development at Schott in cooperation with the users of our materials with scientists and engineers, interested customers and friends, and with the employees of our firm.

Author: Jef Poortmans
Publisher: John Wiley & Sons
ISBN: 0470091266
Category : Science
Languages : en
Pages : 504

View

Book Description
Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.

Author: Dongfang Yang
Publisher: BoD – Books on Demand
ISBN: 1789233267
Category : Technology & Engineering
Languages : en
Pages : 520

View

Book Description
Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.

Author: S Neralla
Publisher: BoD – Books on Demand
ISBN: 9535125729
Category : Science
Languages : en
Pages : 292

View

Book Description
This book provides an overview of chemical vapor deposition (CVD) methods and recent advances in developing novel materials for application in various fields. CVD has now evolved into the most widely used technique for growth of thin films in electronics industry. Several books on CVD methods have emerged in the past, and thus the scope of this book goes beyond providing fundamentals of the CVD process. Some of the chapters included highlight current limitations in the CVD methods and offer alternatives in developing coatings through overcoming these limitations.

Author: Michel Houssa
Publisher: CRC Press
ISBN: 1420034146
Category : Science
Languages : en
Pages : 614

View

Book Description
The drive toward smaller and smaller electronic componentry has huge implications for the materials currently being used. As quantum mechanical effects begin to dominate, conventional materials will be unable to function at scales much smaller than those in current use. For this reason, new materials with higher electrical permittivity will be requ