Physical Modelling in Geotechnics, Volume 1 PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Physical Modelling in Geotechnics, Volume 1 PDF full book. Access full book title Physical Modelling in Geotechnics, Volume 1 by Andrew McNamara. Download full books in PDF and EPUB format.
Author: Andrew McNamara Publisher: CRC Press ISBN: 0429797672 Category : Technology & Engineering Languages : en Pages : 1370
Book Description
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Author: Andrew McNamara Publisher: CRC Press ISBN: 0429797672 Category : Technology & Engineering Languages : en Pages : 1370
Book Description
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Author: Andrew McNamara Publisher: CRC Press ISBN: 0429797613 Category : Technology & Engineering Languages : en Pages : 1240
Book Description
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.
Author: Tomasz Nowakowski Publisher: CRC Press ISBN: 113802709X Category : Technology & Engineering Languages : en Pages : 266
Book Description
Within the last fifty years the performance requirements for technical objects and systems were supplemented with: customer expectations (quality), abilities to prevent the loss of the object properties in operation time (reliability and maintainability), protection against the effects of undesirable events (safety and security) and the ability to restore performance (resilience). The need to adapt the operation of complex systems in such an uncertain and volatile environment has caused the necessity to formulate new and well established achievements associated with modeling, testing and evaluation of these properties. The concept of a complex system applies not only to the technical ones but also the infrastructure of major importance for social life such as transportation and logistics systems, buildings, power systems, water distribution systems or health services. Safety and Reliability: Methodology and Applications contains the proceedings of the 24th European Safety and Reliability Conference (ESREL 2014, Wroclaw, Poland, 14-18 September 2014), and discusses theories and methods and their applications in the areas of risk, safety and reliability. The abstracts book (408 pages) + full paper CD-ROM (2496 pages) will be of interest to researchers and practitioners, academics and engineers working in academic, industrial and governmental sectors.
Author: Masaki Kitazume Publisher: CRC Press ISBN: 9781439824696 Category : Technology & Engineering Languages : en Pages : 254
Book Description
The Sand Compaction Pile or (SCP) method is used frequently in construction to form compacted sand piles by vibration, dynamic impact or static excitation in soft ground. Originally developed in Japan to improve stability or compressibility and to prevent liquefaction failure in loose sand, the SCP method is now often applied to soft clay ground to ensure stability and reduce ground settlement. This book presents detailed descriptions of design, execution, quality control, equipment and assurance aspects of the SCP method, illustrating the theory with case studies from around Japan and also including a thorough overview of the existing literature on research and development carried out since the 1950s. Two final chapters cover vital aspects of design procedures for clay and sandy ground to enable practitioners to frame an appropriate set of parameters for durable and cost-efficient design.
Author: Andrew McNamara Publisher: CRC Press ISBN: 0429797680 Category : Technology & Engineering Languages : en Pages : 803
Book Description
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Author: National Academies of Sciences, Engineering, and Medicine Publisher: ISBN: 9780309440271 Category : Languages : en Pages : 350
Book Description
Earthquake-induced soil liquefaction (liquefaction) is a leading cause of earthquake damage worldwide. Liquefaction is often described in the literature as the phenomena of seismic generation of excess porewater pressures and consequent softening of granular soils. Many regions in the United States have been witness to liquefaction and its consequences, not just those in the west that people associate with earthquake hazards. Past damage and destruction caused by liquefaction underline the importance of accurate assessments of where liquefaction is likely and of what the consequences of liquefaction may be. Such assessments are needed to protect life and safety and to mitigate economic, environmental, and societal impacts of liquefaction in a cost-effective manner. Assessment methods exist, but methods to assess the potential for liquefaction triggering are more mature than are those to predict liquefaction consequences, and the earthquake engineering community wrestles with the differences among the various assessment methods for both liquefaction triggering and consequences. State of the Art and Practice in the Assessment of Earthquake-Induced Soil Liquefaction and Its Consequences evaluates these various methods, focusing on those developed within the past 20 years, and recommends strategies to minimize uncertainties in the short term and to develop improved methods to assess liquefaction and its consequences in the long term. This report represents a first attempt within the geotechnical earthquake engineering community to consider, in such a manner, the various methods to assess liquefaction consequences.
Author: Masaki Kitazume Publisher: CRC Press ISBN: 0203589637 Category : Technology & Engineering Languages : en Pages : 434
Book Description
The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
Author: G. N. Pande Publisher: ISBN: Category : Technology & Engineering Languages : en Pages : 648
Book Description
"The first part, Chapters 1-5, deals with the essential aspect of formulating the mechanics of transient dynamic behaviour for loading of various frequencies... Chapters 6-18 deal with the crux of the matter."--Preface.
Author: John W. Bull Publisher: CRC Press ISBN: 0203887778 Category : Architecture Languages : en Pages : 465
Book Description
Correctly understanding, designing and analyzing the foundations that support structures is fundamental to their safety. This book by a range of academic, design and contracting world experts provides a review of the state-of-the-art techniques for modelling foundations using both linear and non linear numerical analysis. It applies to a range of infrastructure, civil engineering and structural engineering projects and allows designers, engineers, architects, researchers and clients to understand some of the advanced numerical techniques used in the analysis and design of foundations. Topics include: Ground vibrations caused by trains Pile-group effects Bearing capacity of shallow foundations under static and seismic conditions Bucket foundation technology for offshore oilfields Seismically induced liquefaction in earth embankment foundations and in pile foundations Free vibrations of industrial chimneys and TV towers with flexibility of the soil Settlements of high rise structures Seepage, stress fields and dynamic responses in dams Site investigation
Author: Andrew McNamara
Author: Andrew McNamara
Author: Andrew McNamara
Author: Tomasz Nowakowski
Author: Masaki Kitazume
Author: Andrew McNamara
Author: 
Author: National Academies of Sciences, Engineering, and Medicine
Author: Masaki Kitazume
Author: G. N. Pande
Author: John W. Bull